BVEStation

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Fan Railer

Pages: [1] 2 3 4 ... 60
1
Other Projects / Re: FRT is Coming Back
« on: January 02, 2018, 10:37:53 pm »
Great to have you back!

2
NYCTA Projects / W Train WIP
« on: September 15, 2017, 08:22:03 am »

3
NYCTA Projects / Re: A to Far Rockaway [Re-Signaled]
« on: August 07, 2017, 12:37:04 pm »


Showcasing updates made to both the A line to Far Rock and the R9. Several signals were fixed on the route, and two sets of SMEE announcements have been added. On the R9, several sounds were added (brake handle) and updated (whistle). Physics were also adjusted. You can download the updated A line here (remember to read the readme.txt file): http://www.mediafire.com/file/4azf7y2966jigd7/NYCT-A+Line+%28207th+St+to+Far+Rockaway%29+%5BRe-Signaled%5D.rar

Remember you must have downloaded the objects from the following link for this re-signaled route file to load properly:
http://openbveconnect.com//index.php?action=downloads;cat=15

Enjoy, and remember to visit the NYTM for openBVE weekends to check out exclusive unreleased content =)

Time-lapse version: http://youtu.be/qHckTNkTg9E

4
NYCTA Projects / Re: A to Far Rockaway [Re-Signaled]
« on: August 06, 2017, 11:27:19 am »
Good news: I finally found time to fix the 3 aforementioned signals. Additionally, the next update will also include two sets of SMEE announcements and an NTT announcement set. Stay tuned =)

6
NYCTA Projects / Re: R44/R46 P-Wire Cab [Regulated Operating Mode]
« on: June 21, 2017, 10:39:54 am »
http://www.youtube.com/watch?v=Hw9xah3D6Ts

As promised, here is the R44 Pre-GOH with the P-Wire cab and Regulated Operating Mode by Harry Daley-Young and I. As opposed to the traditional manual control with switching, series, and parallel notches, regulated mode has specific speeds set on the throttle, and advancing the controller forward to a specific notch will cause the train to accelerate to the desired speed on the notch.

In this video, I run the train on the A line from Howard Beach -JFK to Broad Channel. Enjoy =)

Download: http://www.mediafire.com/file/f1mu3dmi83m54hp/R44+Pre-GOH+1972+P-Wire.7z

7
NYCTA Projects / R44/R46 P-Wire Cab [Regulated Operating Mode]
« on: June 21, 2017, 08:30:03 am »
http://www.youtube.com/watch?v=oJ8RYGNjC_k

Thanks to newly released, high resolution images of the original R46 P-Wire controls, Harry Daley-Young and I are pleased to be able to offer you guys an updated Pre-GOH R46 with the P-Wire control console operating in "Regulated Mode". As opposed to the traditional manual control with switching, series, and parallel notches, regulated mode has specific speeds set on the throttle, and advancing the controller forward to a specific notch will cause the train to accelerate to the desired speed on the notch.

In this video, I run the train on the A line from Euclid Avenue to Mott Avenue - Far Rockaway. Enjoy, and stay tuned for an updated R44 Pre-GOH with the P-Wire regulated operating mode =)

Download: http://www.mediafire.com/file/1imd8i0dclda00p/R46+Pre-GOH+%28Regulated+Mode%29.7z

8
NYCTA Projects / Re: A to Far Rockaway [Re-Signaled]
« on: June 21, 2017, 08:28:54 am »
Mike I found 3 instances where this has occurred. Between 168th and 145th There's a green signal just prior to the first curve and on the other end is a timer. At the end of 86th st is a green, then followed by timers, then between Chambers and Fulton, there is a double green followed by timers. The signals in the  rest of the route looks good.
I'll take a look in a little bit.
EDIT: I have checked it out, and all of those locations that you mentioned should have the first red be a yellow. However there is not a signal available in this specific route that would clear from yellow to green if you approach it under the specified timed speed. I could still replace those should I find the time to do so.

9
NYCTA Projects / Re: A to Far Rockaway [Re-Signaled]
« on: June 20, 2017, 04:50:32 am »
I downloaded this when it was announced on Facebook, and I've gotten as far as 80th street.  No significant issues at all.   

A few minor questions:

Shouldn't there be GT/ST signs before those signals. Or is the "T" sufficient.

Should it be possible to encounter a Red/Lunar signal without first seeing a Yellow?

Thanks,

Ed

Technically, yes, before all timed sections, there should be GT/ST signs. If it just says T, normally it's a stand-in for GT, or it is a permanent ST that is always activated.

No, it is NOT possible to encounter a red timed signal without first seeing a yellow. If that crops up anywhere in this route, do let me know, although I think I was thorough enough to avoid that.

10
I'm really digging those new signals!

11
NYCTA Projects / Re: A to Far Rockaway [Re-Signaled]
« on: June 13, 2017, 02:04:04 pm »
I'm downloading it right now, thank you Fan Railer, also I heard that you shouldn't replace the Elevated folder because it will cause problems with the elevated section of the line or something like that, was this true? If it was, has it been fixed?
The issue's been fixed. You just need to download the 6thAve object folder from their website and install it.


https://www.youtube.com/watch?v=O2aAzg5_4AU

12
NYCTA Projects / A to Far Rockaway [Re-Signaled]
« on: June 13, 2017, 10:20:25 am »

http://www.youtube.com/watch?v=sD_Xv2iho5k
Here is the A line from 207th St. Manhattan to Far Rockaway Queens, re-signaled by yours truly. In order for this route to load, you must have first downloaded all the original files from openBVEconnection [http://openbveconnect.com//index.php?action=downloads]. Enjoy =)

Download re-signaled route file: http://www.mediafire.com/file/4azf7y2966jigd7/NYCT-A+Line+%28207th+St+to+Far+Rockaway%29+%5BRe-Signaled%5D.rar

Remember to come visit the NY Transit Museum on weekends for the OpenBVE workshop (11:30-12:30 & 3:30-4:30). See you there!
Here is the A line from 207th St. Manhattan to Far Rockaway Queens, re-signaled by yours truly. In order for this route to load, you must have first downloaded all the original files from openBVEconnection [http://openbveconnect.com//index.php?action=downloads]. Enjoy =)

Download re-signaled route file: http://www.mediafire.com/file/4azf7y2966jigd7/NYCT-A+Line+%28207th+St+to+Far+Rockaway%29+%5BRe-Signaled%5D.rar

Remember to come visit the NY Transit Museum on weekends for the OpenBVE workshop (11:30-12:30 & 3:30-4:30). See you there!

13



READ FIRST:
You can download the reskin here: http://jdesingsts.wixsite.com/jdesignsts/downloads-1
You can download the mod pack here: http://www.mediafire.com/file/3albc4r9rebkblv/TS2017_DTG_NJT_Arrow_III_MU_Minor_Sound_And_Physics_Mod_Pack.rar

Replaced AC motor sounds with DC motor sounds, and swapped Wabco AA-2 horn with Leslie S2M horn.

BE SURE to install the reskin first before installing the mod package. And make sure you read the readme files provided with both the reskin and the mod package. Thanks for downloading and enjoy =)

Facebook page: https://www.facebook.com/FanRailerMODS/

14


READ FIRST:
Extended release commentary while running NJT North Jersey Coast Line train 3511 from NYP to South Amboy. Remember to read the DLC readme and the Mod Pack readme files! Enjoy =)

This is the DTG New Jersey Transit GE Arrow III EMU Minor Sound & Physics Mod Pack V1.0 for TS2017

In order to utilize this freeware physics & sound upgrade, you must have purchased the "Train Simulator: NJ TRANSIT® Arrow III EMU Add-On" available here: http://store.steampowered.com/app/500247/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the physics & sound enhancements found in this pack for personal use if you so choose.

THIS IS BOTH A PHYSICS AND SOUND UPGRADE PACK.

The purpose of this pack is to make VERY minor sound & physics adjustments.


General Parameter Change Log (Physics):
1. Addition of one power point in the TEvsSpeed Curve file @ 80 MPH.
2. Specified specific power calls for each power notch in TEvsThrottle file.
3. Adjusted traction amperage to allow proper motor sound volume at speed.
4. Increased car weight to 65.6 imperial tons (146,944 lbs).

General Parameter Change Log (Sounds):
1. Deleted horn lever off sound (not needed).
2. Reversed door sounds so they play correctly.


IMPORTANT; Install Instructions

1. Open the following directory: "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\DTG\ArrowIIIPack01"
2. Open the "DTG_NJT_Arrow_III_MU_Minor_Sound_And_Physics_Mod.rar" file
3. Drag both folders from the .rar file into the directory from step 1.
4. Physics & Sound mod installation is complete.
5. Run TS2017 to confirm.

Thank you for downloading and installing. Please contact me if there is a problem with the functionality of this mod pack.
Enjoy =)

Download here: http://www.mediafire.com/file/3albc4r9rebkblv/TS2017_DTG_NJT_Arrow_III_MU_Minor_Sound_And_Physics_Mod_Pack.rar

Facebook page: http://www.facebook.com/FanRailerMODS/

15
NYCTA Projects / Re: (WIP) Official Update Thread for the R44
« on: April 01, 2017, 12:14:52 am »
LOL @ that Easter Egg tho...

Download this version of the R44 here: http://www.mediafire.com/?3cada613b4dz945

Pages: [1] 2 3 4 ... 60