BVEStation

Author Topic: Brightness Commands  (Read 676 times)

Offline Simon

  • Conductor
  • **
  • Posts: 223
  • Gender: Male
  • BVEStation Member / Community Critic
    • View Profile
Brightness Commands
« on: July 29, 2017, 03:09:01 pm »
Does anyone have the brightness commands for the 6 and the A line to Far Rockaway? Thanks!
Kawasaki_Plant

Offline BadriveR142A

  • Conductor
  • **
  • Posts: 164
  • Gender: Male
  • 1970s Routes developper
    • View Profile
Re: Brightness Commands
« Reply #1 on: August 12, 2017, 03:38:05 am »
Does anyone have the brightness commands for the 6 and the A line to Far Rockaway? Thanks!
You should edit the route and add the brightness command yourself. The command should be .Brightness 0 (dark) to 225 (bright)
If you want to make the cab dark in the tunnels, and bright in the stations, for example, you should have

12484,.freeobj 0,161, etc

=================================
"Station" Start
=================================
                       |
                      \|/
12481,..Brightness 0,                                     Here add 2 Brightness commands to get a smooth transition, make sure
12484,.Brightness 220,.sta.....                       to have a little interval between each, so you'll definetly have a smooth
12486,....                                                                                     transition
etc

=================================
"Station" end
=================================
                         |
                        \|/
12683,.Brightness 220,                                                         
12685,.Brightness 0,,.freeobj 0;454;......     

Make sure to do this for all underground stations, I tried my best to explain you so I'm sorry if you still don't understand. If it doesn't work take a look at that: http://brnobve.eu/Guides/Building%20a%20route%20for%20BVE.pdf. There are other ways to do that, but this one is the most effective to me
« Last Edit: August 12, 2017, 04:06:37 am by BadriveR142A »

1960 - 1970s Lover