BVEStation

Author Topic: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II  (Read 194000 times)

Offline Psycho William

  • Regular Developer
  • Supervisor
  • **
  • Posts: 1,097
  • Rating: +2/-0
  • Gender: Male
  • C#/Train Developer
    • View Profile
« Last Edit: January 22, 2015, 04:35:32 pm by Dj Hammers »

Offline Psycho William

  • Regular Developer
  • Supervisor
  • **
  • Posts: 1,097
  • Rating: +2/-0
  • Gender: Male
  • C#/Train Developer
    • View Profile

Offline Fox-179

  • Dispatcher
  • ****
  • Posts: 907
  • Rating: +45/-26
  • Gender: Male
    • View Profile
Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
« Reply #2 on: March 04, 2012, 04:58:31 pm »
I checked it out.
Things that are fine and don't need to be changed or just minor fixes are:
Interior(floors,seats and textures are great but the wall texture can be retaken for higher quality) it looks like a paint(program) texture.
Possibly an actual gate texture for the R-32 which can be taken from an R-62/A,42 or 32.

Things that need to be fixed are:
the doors obviously(texture and they close too fast)
higher quality exterior for the front and side(looks very cartoonish)
new logo
underbody work
sounds and a cab.(very important).

I would rate this BETA as a 5 out of 10
Interior is near perfect except for the wall texture and possibly ads also rollsign that can be a bit more realistic.
Everything else is very low quality(exterior) theres no cab and no sounds.
« Last Edit: March 04, 2012, 05:00:57 pm by Fox-179 »

Offline SubwayTrainOperator5

  • Dispatcher
  • ****
  • Posts: 761
  • Rating: +3/-4
  • Gender: Male
  • R44, R46, and R68 fan / OpenBVE Videomaker
    • View Profile
    • My YouTube Channel
Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
« Reply #3 on: March 04, 2012, 05:03:07 pm »
This exterior is great! But there is some stuff which could be better. Like Fox-179 said, it should have some more and better photorealistic textures (Possibly for the floor, exterior gates, interior walls, etc). Otherwise it is great! This exterior could go onto Error's new R32 possibly
Signature Removed (dead link)

Offline Psycho William

  • Regular Developer
  • Supervisor
  • **
  • Posts: 1,097
  • Rating: +2/-0
  • Gender: Male
  • C#/Train Developer
    • View Profile
Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
« Reply #4 on: March 04, 2012, 05:16:47 pm »
I know i am new person on bvestation. I am trying doing my best.

Offline peacemak3r

  • Dispatcher
  • ****
  • Posts: 536
  • Rating: +11/-2
  • Gender: Male
  • NYCTF
    • View Profile
Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
« Reply #5 on: March 04, 2012, 05:27:09 pm »
It looks good.

I personally don't see the cartoonish exterior Fox-179 was talking about.  It looks like a photo that's just compacted and resized smaller in my opinion.

Also the doors closing too fast?  Either I'm high or it's the other way around.  The doors are closing too slow for me.  It's opening faster then usual though.

The door texture, I figure you just used the same photo as the R32 exterior because that's what it looks like for me.  I'd say the doors look out of wack is because I'll assume the exterior photo was resized smaller then the original thus making that door texture look fuzzy.

Interior is puzzling me.  Some parts looks as if you took a picture of it, where other parts look like it was made from paint.  Either I'm just getting a headache from this Java project I'm working for class or it is was I stated.

Other then that I like it.  Obviously missing a cab and sounds but it's BETA so I'm not complaining.

I don't normally rate BETA's because there is no point.  It's going to change regardless.

Offline Dr. Subway18

  • Operator
  • ***
  • Posts: 441
  • Rating: +0/-0
  • Gender: Male
  • proud 1999 Kenworth W900B owner(NTC cummins, 10sp)
    • View Profile
Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
« Reply #6 on: March 04, 2012, 05:28:23 pm »
I know i am new person on bvestation. I am trying doing my best.
this was a pretty good train to start with, now you just have to improve the quality. if you need a cab or the basic train to place the exterior in, just ask around im sure theres developers here that would be wiling to help you out with the amount of work that you put in. the thing that i saw that really needed improving was the Nose. But in any view i thought it was pretty reasonable since its the frist released R32 we have of this kind.

Offline Dr. Subway18

  • Operator
  • ***
  • Posts: 441
  • Rating: +0/-0
  • Gender: Male
  • proud 1999 Kenworth W900B owner(NTC cummins, 10sp)
    • View Profile
Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
« Reply #7 on: March 04, 2012, 05:30:20 pm »
Also the doors closing too fast?  Either I'm high or it's the other way around.
ROFLMAO

Offline Psycho William

  • Regular Developer
  • Supervisor
  • **
  • Posts: 1,097
  • Rating: +2/-0
  • Gender: Male
  • C#/Train Developer
    • View Profile
Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
« Reply #8 on: March 04, 2012, 05:34:10 pm »
It looks good.

I personally don't see the cartoonish exterior Fox-179 was talking about.  It looks like a photo that's just compacted and resized smaller in my opinion.

Also the doors closing too fast?  Either I'm high or it's the other way around.  The doors are closing too slow for me.  It's opening faster then usual though.

The door texture, I figure you just used the same photo as the R32 exterior because that's what it looks like for me.  I'd say the doors look out of wack is because I'll assume the exterior photo was resized smaller then the original thus making that door texture look fuzzy.

Interior is puzzling me.  Some parts looks as if you took a picture of it, where other parts look like it was made from paint.  Either I'm just getting a headache from this Java project I'm working for class or it is was I stated.

Other then that I like it.  Obviously missing a cab and sounds but it's BETA so I'm not complaining.

I don't normally rate BETA's because there is no point.  It's going to change regardless.

i know my first project isn't improvement yet. Later, my project will be more improvement

You can add cab and sounds from straphanger32's R32

Offline SubwayTrainOperator5

  • Dispatcher
  • ****
  • Posts: 761
  • Rating: +3/-4
  • Gender: Male
  • R44, R46, and R68 fan / OpenBVE Videomaker
    • View Profile
    • My YouTube Channel
Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
« Reply #9 on: March 04, 2012, 05:50:34 pm »
Also the doors closing too fast?  Either I'm high or it's the other way around.
ROFLMAO

It is the other way around for me too, but I put it onto Straphanger32's R32. Whether the doors close too fast or not depends on which train you put the exterior onto. But you can always trim the door closing sound in Audacity to be made shorter (Removing the short "post-closure" noise that is commonly found in the Doorcls.wav of many trains), so it is more realistic when the doors close.
Signature Removed (dead link)

Offline Psycho William

  • Regular Developer
  • Supervisor
  • **
  • Posts: 1,097
  • Rating: +2/-0
  • Gender: Male
  • C#/Train Developer
    • View Profile
Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
« Reply #10 on: March 04, 2012, 07:02:39 pm »
oo ok thank u guys for checked my project out and telling me so lemme fix them again.

Offline ErrorMacro11

  • Operator
  • ***
  • Posts: 421
  • Rating: +0/-0
  • Gender: Male
  • FreeLance Developer
    • View Profile
Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
« Reply #11 on: March 04, 2012, 08:17:46 pm »
really good
but needs
- Ability to change rollsigns
- a panel
and a cab

Offline SubwayTrainOperator5

  • Dispatcher
  • ****
  • Posts: 761
  • Rating: +3/-4
  • Gender: Male
  • R44, R46, and R68 fan / OpenBVE Videomaker
    • View Profile
    • My YouTube Channel
Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
« Reply #12 on: March 04, 2012, 08:29:26 pm »
really good
but needs
- Ability to change rollsigns
- a panel
and a cab

Ehh, panel and cab is the same thing...
Signature Removed (dead link)

Offline alanr179

  • New Recruit
  • *
  • Posts: 24
  • Rating: +0/-6
  • Gender: Male
  • BVEStation Member
    • View Profile
Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
« Reply #13 on: March 04, 2012, 08:49:18 pm »
how do I change the rollsign from the h to the a

Offline Slants4Lyfe

  • Operator
  • ***
  • Posts: 270
  • Rating: +21/-7
  • Gender: Male
  • 3 Years And Counting
    • View Profile
Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
« Reply #14 on: March 04, 2012, 09:17:05 pm »
Hey Mudwrestle, PM me when you get a chance.
Formally Known as tvega961