BVEStation

Author Topic: Official Railworks: Train Simulator 2014 Videos and Screenshots Thread  (Read 56293 times)

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2014: M8s most likely tomorrow
« Reply #105 on: April 23, 2014, 10:13:40 am »
The Kawasaki Metro-North M8 EMU is scheduled to be online at the steam store mid afternoon tomorrow, so stay tuned ;)

Offline PelhamLocal

  • Operator
  • ***
  • Posts: 379
  • Gender: Male
  • BVEStation Member
    • View Profile
Re: Official Railworks: Train Simulator 2014 Videos and Screenshots Thread
« Reply #106 on: April 23, 2014, 03:30:37 pm »
SWEET!

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2014: ACS-64 E-Bell Doppler Effect Fix and Volume Mod Released
« Reply #107 on: April 23, 2014, 11:08:03 pm »
Train Simulator 2014 HD EXCLUSIVE: ACS-64 E-Bell Doppler Effect Addition and Volume Fix Pack
Train Simulator 2014 HD: Amtrak Siemens ACS-64 666 Stops at New Rochelle Station With Doppler Effect
Hehe, Amtrak ACS-64 666, The Devil's Sprinter XD...
This is the Amtrak ACS-64 Graham-White 373 Series E-Bell Doppler Effect Fix pack.

In order to utilize this freeware sound upgrade, you must have purchased the NEC: New York - New Haven Route Add-On available at Steam: http://store.steampowered.com/app/258643/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to use the sounds for personal use if you so choose.

The purpose of this pack is to replace the default E-bell sound that comes with the pack with a file of the same sound that is optimized for the game to add the doppler effect that is missing from the original file.
The parameters that are required for a sound to exhibit the doppler effect in the game are as follows:
1. File is in mono.
2. File is 16 bit.
3. File is 44,100 hZ
I have also played around with the volume of the K5LA in respects to the bell, tuning down the originally loud bell and raising the airchime volume.

IMPORTANT; Install Instructions; ALWAYS CREATE BACKUP FILES TO REVERT TO INCASE INSTALLATION DOES NOT PROCEED AS PLANNED!

1. Open the "NewYorkNewHavenAssets.ap" pack file with .7z
2. Proceed to open folders until the .7z directory reads "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\NewYorkNewHaven\NewYorkNewHavenAssets.ap\Audio\RailVehicles\Electric\ACS-64\Cab\".
3. Then open the "Railworks_Amtrak_ACS-64_Bell_Sound_Doppler_Effect_Fix.rar" file.
4. Highlight all files in the .rar file and drag them into the .ap file directory.
5. Click "OK" when it asks you to Confirm File Copy.
6. The installation should be complete. Run TS2014 to confirm.

Thank you for downloading and installing.
Enjoy =)
Download Link: http://www.mediafire.com/download/zdhyh753gty1rl1/TS2014_Amtrak_ACS-64_E-Bell_Doppler_Effect_Fix_Pack.rar

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2014: M8 is released
« Reply #108 on: April 24, 2014, 09:43:19 am »
http://store.steampowered.com/app/258647/ - Here it is guys. Action soon XD
EDIT: A bit disappointed that they used default sounds from the Javelin EMU. Guess a sound pack is in order here.
« Last Edit: April 24, 2014, 10:01:21 am by Fan Railer »

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2014: M8 Tutorial
« Reply #109 on: April 24, 2014, 10:44:06 am »

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2014: M8 Mods Released
« Reply #110 on: April 24, 2014, 08:01:30 pm »
This has to be the quickest turn-around I've had for any mod I've done. Remember to create backup files in case something goes sour in the future. Enjoy =) Sound mod video first, followed by Physics mod video:
Train Simulator 2014 HD EXCLUSIVE: Metro-North Kawasaki M8 EMU Leslie RS2M Horn and Door Sound Pack
This is the Metro-North Kawasaki M8 Leslie RS2M & Door Sound Upgrade Pack.

In order to utilize this freeware sound upgrade, you must have purchased the Metro-North Kawasaki M8 EMU Add-On available at Steam: http://store.steampowered.com/app/258647/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify /use the sounds found in this pack for personal use if you so choose.

THIS IS NOT A PHYSICS UPGRADE PACK. The M8 Physics pack will be released separately from this pack.

The purpose of this pack is to replace the default Javelin horn and door sounds with authentic Metro-North Leslie RS2M air horn and door sounds.


IMPORTANT; Install Instructions; REMEMBER TO ALWAYS CREATE BACKUP FILES TO REVERT TO INCASE THE INSTALLATION DOES NOT WORK AS PLANNED!

1. Open the "M8Pack01Assets.ap" pack file with .7z
2. Proceed to open folders until the .7z directory reads "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\M8Pack01\M8Pack01Assets.ap\Audio\RailVehicles\Electric\M8\Exterior\".
3. Then open the "Railworks_MNR_Kawasaki_M8_Leslie_RS2M_&_Door_Sound_Mod.rar" file.
4. Highlight allfiles in the .rar file and drag them into the .ap file directory.
5. Click "OK" when it asks you to Confirm File Copy.
6. The installation should be complete. Run TS2014 to confirm.

Thank you for downloading and installing.
Enjoy =)
Download here: http://www.mediafire.com/download/ey6j4ea1e5jihdy/TS2014_MNR_Kawasaki_M8_Leslie_RS2M_%26_Door_Sound_Mod.rar


Train Simulator 2014 HD EXCLUSIVE: Metro-North Kawasaki M8 EMU Phyics Modification Pack
This is the Metro-North Kawasaki M8 Physics Upgrade Pack.

In order to utilize this freeware physics upgrade, you must have purchased the Metro-North Kawasaki M8 EMU Add-On available at Steam: http://store.steampowered.com/app/258647/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the physics enhancements found in this pack for personal use if you so choose.

THIS IS NOT A SOUND UPGRADE PACK. The Leslie RS2M + door sound pack will be released separately from this pack.

The purpose of this pack is to improve accuracy of the tractive and braking effort curves, reflect the TE limit of 15,000 lbf in the on-screen TE monitor, and tweak car weights slightly.

Parameter Change Log:
1. Modified Tractive Effort and Dynamic Brake curves based on 800 kW power rating per car and 15,000 lbf (66.7233 kN) starting effort; TE and Braking Curves Identical
2. Maximum sustainable speed limited to 100 mph via changes to TE curve file.
3. Ampere parameters adjusted so that cab TE monitor display is limited to 15,000 lbf for TE and braking effort.
4. Weights modified to match those in manual; A car = 65.7 metric tons, B car = 65.2 metric tons


IMPORTANT; Install Instructions; REMEMBER TO ALWAYS CREATE BACKUP FILES TO REVERT TO INCASE THE INSTALLATION DOES NOT WORK AS PLANNED!

1. Open the "M8Pack01Assets.ap" pack file with .7z
2. Proceed to open folders until the .7z directory reads "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\M8Pack01\M8Pack01Assets.ap\RailVehicles\Electric\M8MTA\".
3. Then open the "Railworks_MNR_Kawasaki_M8_Physics_Mod.rar" file.
4. Highlight both folders in the .rar file and drag them into the .ap file directory.
5. Click "OK" when it asks you to Confirm File Copy.
6. The installation should be complete. Run TS2014 to confirm.

Thank you for downloading and installing.
Enjoy =)
Download here: http://www.mediafire.com/download/1gc4e92agbhrgq4/TS2014_MNR_Kawasaki_M8_Physics_Mod.rar
« Last Edit: April 24, 2014, 08:04:30 pm by Fan Railer »


Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2014: SEPTA AEM-7
« Reply #112 on: May 24, 2014, 02:02:41 pm »
In preparation for the release of the shoreliner/comet cars as part of the P32AC-DM dlc, I've fixed my copy of the SEPTA AEM-7:
http://www.youtube.com/watch?v=cv0FiT5OnNY#
You can find the SEPTA, NJT, and Amtrak phase III reskins for the AEM-7 here: http://forums.steampowered.com/forums/showthread.php?t=3110877

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2014: AEM-7DC Bell Comparison and Opinion
« Reply #113 on: May 24, 2014, 07:28:19 pm »
In the process of developing the railworks AEM-7DC sound pack. As stated in the video, I would like other player's opinions on which bell they feel suites the AEM-7DC better. Enjoy and comment away =)
Train Simulator 2014 HD EXCLUSIVE: Have Your Say; Amtrak EMD AEM-7 Steel Bell Comparison

Offline jay1323

  • New Recruit
  • *
  • Posts: 71
  • Gender: Male
  • BVEStation Member
    • View Profile
FanRailer I like your work on the sounds pack. I prefer Bell 2 than Bell one because bell 2 is louder and has a nice touch.

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2014: EMD AEM-7DC K5LA & Bell Pack Released
« Reply #115 on: May 25, 2014, 01:49:17 pm »
http://www.youtube.com/watch?v=L3iSGQZX_Wg#
This is the Amtrak EMD AEM-7DC K5LA and Bell Sound Upgrade pack.

In order to utilize this freeware sound upgrade, you must have purchased the Northeast Corridor Add-On pack available at Steam: http://store.steampowered.com/app/65232/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the sound enhancements found in this pack for personal use if you so choose.

The purpose of this pack is to replace the original bell and horn sound in the original AEM-7.

Pack Information:
On popular request, this pack comes with two bell sounds (low pitch and high pitch), both recorded directly off of AEM-7DC units, in addition to the K5LA (which comes with exterior and in-cab loops).
Read the "owner's manual" section for instructions on how to switch between the two different bell sounds.


IMPORTANT; Install Instructions; Remember to ALWAYS create a backup file in case you need to revert.

1. Open the Northeast Corridor asset pack until the directory reads "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\NorthEastCorridor\Audio\RailVehicles\Electric\AEM-7"
2. Then open the "Railworks_AEM-7DC_Sound_Mod_Pack.rar" file.
3. Drag all files from the .rar file and into the directory you opened in step one.
4. Overwrite if asked.
5. The installation should be complete. Run TS2014 to check.

OWNER'S MANUAL:
Once installation is complete, the default bell that is being used is the low pitch bell. In order to change the bell that is used, follow the instructions below:
1a. Open folders until directory reads "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\NorthEastCorridor\Audio\RailVehicles\Electric\AEM-7\Cab\Horn Variation"
1b. You will see two different horn proxyxml files; "Horn (High)" and "Horn (Low)"
2. Open the respective file that contains the bell you want to use; ""Horn (High)" for the high pitch bell or "Horn (Low)" for the low pitch bell.
3. Proceed back to "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\NorthEastCorridor\Audio\RailVehicles\Electric\AEM-7\Cab"
4. Locate and open the "Horn.proxyxml" file.
5. Highlight and copy all text from the file you opened in step 2 into Horn.proxyxml from step 4.
6. Close all open text files and save when prompted.
7. Bell swap should be complete. Run TS2014 to confirm.

Thank you for downloading and installing.
Enjoy =)
Download Link: http://www.mediafire.com/download/1v2ee2txfqknasx/TS2014_Amtrak_AEM-7DC_Sound_Mod_Pack.rar

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel

Offline PelhamLocal

  • Operator
  • ***
  • Posts: 379
  • Gender: Male
  • BVEStation Member
    • View Profile
Re: Official Railworks: Train Simulator 2014 Videos and Screenshots Thread
« Reply #119 on: June 19, 2014, 01:53:18 am »
Beautiful!