BVEStation Forums

BVE => NYCTA Projects => Topic started by: Dj Hammers on December 31, 2010, 09:08:55 pm

Title: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on December 31, 2010, 09:08:55 pm

The long awaited updated R38 has been released. This release features a fully 3D exterior with changeable animated signage and pivoting trucks. The train will be further updated in the summer as well.

(http://www.bvestation.com/uploads/committee/R38Logo.png)
Download Link (http://www.bvestation.com/downloadinfo.php?id=81)






This is the official update thread for the R38.

If any updates are to be made, you can read about them here.



In addition, all questions and comments about the R38 can be made here.

Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on January 19, 2011, 10:46:51 pm
If anyone can convert the R38 to BVE4 compatibility (It is quite a task I warn) please PM me.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers - CHANGELOG
Post by: Dj Hammers on February 19, 2011, 10:52:04 pm
I will be releasing a new version of the R38 very soon that includes some minor realism enhancements and fixes.


Changes Include:

The second power notch of the controller had a black edge on the right, this has been fixed.
I have reduced the aliasing on the pressure gauge to a certain extent.
When the reverser was in forward, there was a little black line cutting between the reverser handle and receptacle, this has been fixed.
When the reverser was in forward, it was a little too high on the panel, the inverse was true for when the reverser was in reverse. This has been fixed.
A small tweak was made to the right side of the panel that included only 2 pixels, it is hardly noticeable in OpenBVE.
I lowered the height of the cab as per the requests of several people.
I also tweaked some colors in the exterior.

I have sent the updated R38 to error46146 for release.




As always I am still looking for people to port the R38 to BVE4...  :P
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers - Updated Release
Post by: Dj Hammers on February 24, 2011, 01:19:54 am
The Updated R38 is out on the downloads section. Have fun operating!
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on February 25, 2011, 10:17:39 pm
I'm working on yet ANOTHER update to address member input about the R38's handling (Mainly the braking behavior).

This update will take longer than the previous one to finalize and release, but expect it soon.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on March 14, 2011, 11:32:35 pm
A surprise is coming.......
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Bombardier01800 on March 15, 2011, 07:51:05 pm
A surprise is coming.......
I love surprises. By the way, I gotta talk to you. Some of it has to do with the R38.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Haven on March 16, 2011, 06:39:37 pm
Oh boy a suprise!!!
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers - BIG Update
Post by: Dj Hammers on March 20, 2011, 12:34:27 am
I am pleased to announce a BIG update to the free R38 add-on for OpenBVE as contribution to the BVEStation community! This update one took quite a bit of time to produce.

List of features for this update (3.2.1):



I also added a suspension creak noise in to the train's folder, however it is not implemented because the openbve causes the train to sway when stopped at the station, making weird and unrealistic noises. However it sounds great when the train is moving!  ;) I could use some help with this as I do not know how to either make the train not sway at the station or make the sound only play when the train is moving.


The new R38 should be uploaded soon!




Other development news: Because I will be focusing my work on the R33-WF and R33-ML, this will probably be the last update for a while (but definitely not the last)
I could use some help converting the train to run with BVE4.
I also need somebody to work a bit on the exterior (to make the roof curved, "clean up" some of the edges, add in poles, etc.....)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Bombardier01800 on March 20, 2011, 12:58:52 am
This is just great to hear... I'll definitely be running this train tomorrow night.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Fox-179 on March 20, 2011, 08:41:31 am
Great I'mma try this out in a bit but I always got and get a nasty heavy lag for the R-38.Only train that does that.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: (SIR) North Shore Line on March 20, 2011, 12:28:27 pm
Nice! Can't wait to check it out.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on March 20, 2011, 03:30:59 pm
The lag might be caused by the use of alpha channels for panel textures. I got rid of some but a few are still there because they add detail to the cab in the form of partial transparency.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: BStyles on March 20, 2011, 04:47:56 pm
I'm not sure why you used alpha channels in a train panel, honestly. They produce great results, like you said, but as stated, they create a heavy lag, most particularly due to the time it would take to process the alpha channels. I would suggest sticking to the regular blue transparency.

BStyles
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on March 20, 2011, 09:07:33 pm
Well at the time there was some reason for why i used them. I think that I will change them all back to blue transparency with the exception of the panel.png because the alpha channels on it all for the simulation of dirt on the window, etc.


Also I forgot to mention that the train's textures were synced to a Huey PRO color calibration device and that the train's dimensions in the train.dat have been re-calculated to the accuracy of around the nearest 100,000th!  ;)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: error46146 on March 20, 2011, 09:19:48 pm
I just received the train package from DJ Hammers, I'll have it up on the site by tomorrow so sit tight..
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Bombardier01800 on March 20, 2011, 10:34:29 pm
Also I forgot to mention that the train's textures were synced to a Huey PRO color calibration device and that the train's dimensions in the train.dat have been re-calculated to the accuracy of around the nearest 100,000th!  ;)
Wow! I'd say that's REALLY accurate!
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: error46146 on March 21, 2011, 03:52:14 pm
The R38 has been uploaded onto the site..go to the Downloads page ( http://www.bvestation.com/downloads.php (http://www.bvestation.com/downloads.php) ); it should be the first one..Enjoy!

Just a little warning: the download may be only 10MB, but you'll need well over 100MB of disk space for the entire package as he included the R38 in various configurations (2,4,6,8 and 10-car train).  You do not need to install the entire set.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Rikabs on March 23, 2011, 12:00:17 am
Just tried it and I LOVE IT!! Appreciate your hard work and dedication in creating this train.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on March 24, 2011, 07:46:14 pm
Just tried it and I LOVE IT!! Appreciate your hard work and dedication in creating this train.
Thanks!  ;D I'm glad that you enjoy it. Things like this take months of hard work to create.




I have received word that the description for the R38 on its download page is out of date. This should be corrected soon.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on March 30, 2011, 08:00:24 pm
The next update for the R38 is in progress. Various inaccurate things are being corrected and a lot of sound improvements are being meticulously worked on by yours truly.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Bombardier01800 on March 30, 2011, 08:52:03 pm
Yo, lemme know if you need some help
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on March 30, 2011, 09:03:37 pm
That's alright Jose, but I have everything under control right now. But how are things on the L going? Just curious.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Bombardier01800 on March 31, 2011, 03:14:38 pm
That's alright Jose, but I have everything under control right now. But how are things on the L going? Just curious.
Cool. Well, the L is stopped for now, mainly because I don't have time, but whenever I get a couple of minutes I'll do a thing here and there
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers - Need Public Input
Post by: Dj Hammers on April 23, 2011, 07:06:28 pm
Ok so today I managed to finally run the R38 on a PC, which means that I could test out plugin functionality. There were a few things I noticed.

1: The horn button animation doesn't work for me.
2: The wiper switch graphic looks weird when the wiper switch is in the "on" position.
3: Pressing pageup 2, 4, 6, 8, (and onwards counting by 2) times results in the wiper staying on but the switch saying that the wiper is off.

Does anyone else have these problems or is it just me?
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Fox-179 on April 23, 2011, 07:11:47 pm
Ok so today I managed to finally run the R38 on a PC, which means that I could test out plugin functionality. There were a few things I noticed.

1: The horn button animation doesn't work for me.
2: The wiper switch graphic looks weird when the wiper switch is in the "on" position.
3: Pressing pageup 2, 4, 6, 8, (and onwards counting by 2) times results in the wiper staying on but the switch saying that the wiper is off.

Does anyone else have these problems or is it just me?
I don't use the train much b\c of that lag but when I used it for my music vid the horn animation I didn't see anything.Not sure about the wipers though.But will or do you consider on making a version without the alpha channels?
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on April 23, 2011, 09:17:57 pm
The current version of the R38 doesn't utilize any alpha channels except for places where they are specifically needed for graphical functionality such as ambient light. Depending on your graphics card you may experience lag; older and lower end graphics cards provide very poor depth sorting performance. Try updating your graphics drivers if you haven't already.

I don't really plan on releasing a version without alpha channels right now because it is very likely that due Moore's law, in the very near future, all computers (And most of today's) will easily be able to process alpha channels without any lag (I got no lag with the train using an ATI Radeon HD 4350).


But yes the horn animation issue seems to be confirmed. I looked over the code and could not find anything wrong, is there anyone out there who can help me out with this? Knowing how most of the bugs in my work have been found and corrected, it is probably something really simple like a spelling error... lol



Also does anyone know how to convert the .dll plugin in the R38 to a .NET plugin so it is compatible will other OS'es such as OS X and Linux? If the plugin can be converted to run on normally on a mac, I could devote more time to the quality control of the plugin features.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Rayvon on April 25, 2011, 12:36:58 am
The current version of the R38 doesn't utilize any alpha channels except for places where they are specifically needed for graphical functionality such as ambient light. Depending on your graphics card you may experience lag; older and lower end graphics cards provide very poor depth sorting performance. Try updating your graphics drivers if you haven't already.

I don't really plan on releasing a version without alpha channels right now because it is very likely that due Moore's law, in the very near future, all computers (And most of today's) will easily be able to process alpha channels without any lag (I got no lag with the train using an ATI Radeon HD 4350).


But yes the horn animation issue seems to be confirmed. I looked over the code and could not find anything wrong, is there anyone out there who can help me out with this? Knowing how most of the bugs in my work have been found and corrected, it is probably something really simple like a spelling error... lol



Also does anyone know how to convert the .dll plugin in the R38 to a .NET plugin so it is compatible will other OS'es such as OS X and Linux? If the plugin can be converted to run on normally on a mac, I could devote more time to the quality control of the plugin features.
If you can get your hands on the source code then you should be able to just compile it into a .NET Plugin
Title: Official Update Thread For The NYCTA R38 By Dj Hammers - Work Restarted
Post by: Dj Hammers on May 30, 2011, 07:01:26 pm
Ok work on the R38 has started up again. There is no limit to the attention to detail I want to implement on this train.  ;D


A couple of goals for the next release:
1: Convert the .dll plugin the train uses in to a .net plugin. I really have NO idea how to do this and I have no experience at all with coding .net, C#, C++ etc..... (Damn school has no engineering program...  :'().

2: Fix the horn animation so it actually works. I really have no idea what is wrong with this thing, I looked at the code hundreds of times and it looks like it should work....

3: Find a way to improve the dynamics of how the windshield wiper switch works.

4: Implement the open and closing side window feature (The code is actually present in the current version, it is just a matter of doing A LOT of tweaking and texture work to get it working right.)

5: Find out what is causing lag on some computers (May be caused by problems with integrated graphics chipsets)

6: Improve the exterior, notably the front.

7: Reduce the file size of the train.

8: Implement some sound improvements.

9: Tweak the braking behavior. While the train brakes realistically in terms of movement, the brake system itself (Such as air pressure values) is not true to the real train.

10: Fix some weird graphical glitches with the power and brake controllers in low brightness. (How on earth do I fix this?)

11: If possible, greatly improve the cab light feature.

12: Possibly implement animated wheels and pivoting trucks. (Not sure if this is a go)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: F train fan on May 30, 2011, 07:13:55 pm
just a question are you planning on making an 8 car R38 for the C train service in openbve
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on May 30, 2011, 07:41:01 pm
There is one in the current package.

In the full .7z file that can be downloaded from BVEStation, there are 10, 8, 6, 4, and 2 car versions of the R38.

Rollsigns can be changed using the commands listed in the train.txt to display the C line designation.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: F train fan on May 30, 2011, 07:52:36 pm
thanks
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Rayvon on June 02, 2011, 03:07:19 pm
you can try looking at a C/++ for dummies book. That's pretty much all you need since the plugins pretty much use if/and/or statements to create events. Then you just compile it
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on June 08, 2011, 06:59:24 pm
A little update as a precursor for things to come:
Last weekend I spent ~6 hours in the subway recording some new sounds to replace the controller sounds with something a little more realistic. I also replaced a couple of other generic sounds. No graphics work has been done so far but I am going to start up on some work in the future. I also gathered some miscellaneous textures for the exterior.

I will be spending the next couple of my weekends gathering sounds and textures in the subway. It isn't fun, but this work will go a long way at improving the train.


That is all, a small update but the beginning of some nice things in the future!
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on June 29, 2011, 01:14:26 am
Quick update:

I have been up all night working on sound improvements. You can now hear the click sound when the door indicator lights up. I also did some adjustments to some sounds that included things like fading and volume adjustment to make everything blend together better.


Are there any other suggestions for sound-related improvements? I'm going down to the city on Thursday for the better part of the day to get sounds and textures, so get your word in now.  ;)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: SubwayTrainOperator5 on June 29, 2011, 01:28:52 pm
Quick update:

I have been up all night working on sound improvements. You can now hear the click sound when the door indicator lights up. I also did some adjustments to some sounds that included things like fading and volume adjustment to make everything blend together better.


Are there any other suggestions for sound-related improvements? I'm going down to the city on Thursday for the better part of the day to get sounds and textures, so get your word in now.  ;)

How about some new door sounds?  :D
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Orion V CNG #748 on June 29, 2011, 01:48:17 pm
Quick update:

I have been up all night working on sound improvements. You can now hear the click sound when the door indicator lights up. I also did some adjustments to some sounds that included things like fading and volume adjustment to make everything blend together better.


Are there any other suggestions for sound-related improvements? I'm going down to the city on Thursday for the better part of the day to get sounds and textures, so get your word in now.  ;)
and maybe some new horn sounds  ;D
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Bombardier01800 on June 29, 2011, 05:40:58 pm
the brake release sounds, the only play when the train is stopped. Do you think you could fix that?
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Simon on June 29, 2011, 08:36:49 pm
Motor Motor Motor Motor!  :)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on October 19, 2011, 03:09:57 pm
I have sent in an updated version of the R38 to the BVEStation submissions email.
It isn't a large update, mostly QA/QC work and some sound and graphics tweaks.

However, the braking issues below 5 MPH have been fixed to the best of my ability.


I will implement new motor sounds from error46146 and Rikabs' R46 once it is released (both use the same 1257E1 GE motors). Animated trucks from the R46 will also be implemented.
So basically major progress on the R38 will remain at a standstill until the R46 is released.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: MegaChulo95 on October 20, 2011, 10:51:53 pm
Mr Railfan sould do a R38 panel for  u  ;D
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on October 20, 2011, 10:57:54 pm
Mr Railfan should do a R38 panel for  u  ;D
Unfortunately because the R38 was retired by the time I had started developing it, getting a clear cab picture was and still is nearly impossible.

So I've gotten as close as possible to a photoreal cab, with 80% of it photo textures.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: SubwayTrainOperator5 on October 20, 2011, 11:02:38 pm
I don't mind the current cab, but I think it really needs a new controller, perhaps one taken from the R32 or something since their controllers are pretty much identical, that old R68-style controller that has been used for many years now just does not look right in an R38 cab
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on October 20, 2011, 11:14:02 pm
yeah i am looking for a new controller. Unlike car types still in service, it's really hard to find R38 cab textures that are usable and even controller textures in general.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: MegaChulo95 on October 21, 2011, 03:46:46 pm
u sould do the R40 Slant next
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: SubwayTrainOperator5 on October 21, 2011, 05:44:58 pm
u sould do the R40 Slant next

Zerobeats2000 is already making a new R40
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Fox-179 on October 22, 2011, 10:22:15 am
yeah i am looking for a new controller. Unlike car types still in service, it's really hard to find R38 cab textures that are usable and even controller textures in general.
Subwaytrainoperator5 has a point most of the SMEE's had or have identical controllers the R-32 and 38 are alike.
http://www.nycsubway.org/perl/show?95614 (http://www.nycsubway.org/perl/show?95614)
However here's a photo of the controller with the knob type probably a replacement.
http://www.nycsubway.org/perl/show?97853 (http://www.nycsubway.org/perl/show?97853)
Here's a shot of a R-38 controller with a regular style flat.

Either or controller type would be fine but I think the one without the knob thats flat would be better.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Fan Railer on October 24, 2011, 05:06:59 pm
I have sent in an updated version of the R38 to the BVEStation submissions email.
It isn't a large update, mostly QA/QC work and some sound and graphics tweaks.

However, the braking issues below 5 MPH have been fixed to the best of my ability.

So the updated version is already in the downloads section? just wanted to check since the date wasn't updated.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on October 24, 2011, 05:15:15 pm
I actually don't know if it has been updated or not. Can an admin confirm if the new version has been uploaded?
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers - UPDATED
Post by: Dj Hammers on October 26, 2011, 03:30:59 pm
The new R38 update is now on the downloads page: http://www.bvestation.com/downloadinfo.php?id=19 (http://www.bvestation.com/downloadinfo.php?id=19)

Download the new version for fixed braking, tweaked sounds, and slightly higher FPS.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: R62A 2067 on November 01, 2011, 03:20:46 pm
I have the older version, and IDK if I should download the new version if this thing would be fixed :
On the middle rollsign on the version I have, there is no "Not in service" while the other rollsigns do. Is this realistic or something else?
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on November 01, 2011, 03:33:10 pm
The rollsigns have been unchanged since the last release.
The rollsigns are realistic, I have checked them using a rollsign I have at my house.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers - Update
Post by: Dj Hammers on January 15, 2012, 09:12:02 pm
I am still working on my projects.

I don't have as much time as I used to have to gather textures and sounds, so I will be asking for contributions from the community a lot more.

Check out the contributor page regularly to see what I and other developers need in order to create our projects.

Link:
http://www.bvestation.com/contributor/ (http://www.bvestation.com/contributor/)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers - Another Update
Post by: Dj Hammers on January 15, 2012, 09:36:15 pm
Several requests have been created for the R38.


Blue18 is working on the exterior and needs YOUR help to further the R38 project.

I also am in need of some material for the R38 as well, check the contributor page to see what I need.

If you wish to see this project progress, please do your part and contribute!


LINK:
http://www.bvestation.com/contributor/
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on July 07, 2012, 05:41:36 pm
Work is starting up again on the R38.

Goals:
1: Increase framerates in the cab:

I realized that the way openBVE does depth sorting for PNG alpha channels is very
inefficient and slows down the simulation, so I am removing alpha channels where possible from the panel.


2: Increase the accuracy of the exterior

For its time, the R38 exterior was very good. It was one of the first with animated doors and rollsigns, as well as a
relatively geometrically accurate interior.
However, in today's day and age, it simply doesn't cut it anymore. When mudwrestle finishes his R32, I will use
his exterior as a basis for a new R38 exterior. All that will be needed is a bit of texture replacement, and
a little editing to the interior pole arrangement.


3: Better brake sounds

I am unhappy with the brake sounds while operating at speed. I will fix this. lol



I hope to have a finished version out shortly after mudwrestle releases his R32. However, I will be away in late summer,so this is all subject to change.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on July 10, 2012, 05:29:30 pm
I have improved the brake valve sounds tremendously. When operating the train, one can now hear the air brakes
being used even at speed. Also, the sound of a small brake release has been added for minor brake adjustments.

A video showcasing these features will be coming soon.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Bombardier01800 on July 10, 2012, 10:51:35 pm
Do you think you'll be able to fix the brakes giving up as the train is stopping?
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on July 10, 2012, 11:38:11 pm
It has already been fixed to a certain extent in the current version of the R38 that you can get on the downloads section, but braking characteristics under 5 MPH are being improved further, don't worry.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on July 11, 2012, 01:58:48 am
Here the preview vid of the R38 I promised you guys. Sorry about the overrun at 42nd street - port authority bus terminal. I should not have released the brakes to B6 two thirds of the way in to the station.
Also I apologize for the low video quality in the tunnels, MOV compression went overboard this time lol
R38 v3.5 for Preview for openBVE (http://www.youtube.com/watch?v=yirRBiGD5Ps#ws)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Bombardier01800 on July 11, 2012, 02:30:27 am
Ok the sounds on this train are by far much, MUCH better than the ones in the current train. It sounds realistic, and the brakes seem a little better. Good job.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on July 11, 2012, 03:06:07 am
Yup! I finally got some nice brake valve sounds and loop sounds to use. This is also a result of me being able to ride the subway a lot more often now. I've recently got full 1080p Rail Fan Window footage of the entire C line, which now offers me a virtually unlimited amount of high quality sounds to use for the R38 and other BVE projects.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: [CT1660] on July 11, 2012, 05:20:47 pm
Nice job! Sounds are spot-on!
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Fan Railer on July 12, 2012, 11:57:04 am
Yup! I finally got some nice brake valve sounds and loop sounds to use. This is also a result of me being able to ride the subway a lot more often now. I've recently got full 1080p Rail Fan Window footage of the entire C line, which now offers me a virtually unlimited amount of high quality sounds to use for the R38 and other BVE projects.
Lol that's heavy stuff. A bit unrelated, but are you planning on uploading that to youtube?
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on July 12, 2012, 11:28:58 pm
Lol that's heavy stuff. A bit unrelated, but are you planning on uploading that to youtube?
I am considering it, I just have very little time to do so. Keep in mind it is more than just the normal route,
it includes reroutes such as C to 2nd Avenue and C via A, as well as full express coverage from the A line
(As of yesterday  :P)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on July 19, 2012, 07:28:13 am
Some news:
I'm leaving for a combined China/Mongolia vacation tomorrow. Development of the R38 BY MYSELF has been suspended until August 29th. Parts of the train will MAY or MAY NOT be worked on by other members of the development team while I am away .

Status updates may or may not be posted until August 29th, but do not worry, the project is not dead, and I have not left.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Brighton Express on July 23, 2012, 11:37:39 pm
Like it DJ. Keep up the good work
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on August 29, 2012, 10:55:16 pm
I'm back, and working on the R38. Here is a preview of the R38 side:
(http://s7.postimage.org/dr47beg7t/preview.png)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on August 30, 2012, 01:55:47 am
(http://s8.postimage.org/gxvnw3aeb/38foammm.png)
A couple hours of lots of concentration, critical thinking, and research...

not even close to done yet (i'm sure people will pick out the many things that are still part of the R32) yet...
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Orion V CNG #748 on August 30, 2012, 07:10:35 am
Side is looking better. great stuff there.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on August 30, 2012, 07:45:25 am
interior
http://www.nycsubway.org/perl/show?97410 (http://www.nycsubway.org/perl/show?97410)

exterior cab side
http://www.nycsubway.org/perl/show?58881 (http://www.nycsubway.org/perl/show?58881)

exterior Front
http://www.nycsubway.org/perl/show?61261 (http://www.nycsubway.org/perl/show?61261)

interior
http://www.nycsubway.org/perl/show?95258 (http://www.nycsubway.org/perl/show?95258)

closeup fronts right logo
http://www.nycsubway.org/perl/show?77373 (http://www.nycsubway.org/perl/show?77373)

interior
http://www.nycsubway.org/perl/show?97418 (http://www.nycsubway.org/perl/show?97418)

side
http://www.nycsubway.org/perl/show?97520 (http://www.nycsubway.org/perl/show?97520)

see at roof
http://www.nycsubway.org/perl/show?59410 (http://www.nycsubway.org/perl/show?59410)

closeup interior
http://www.nycsubway.org/perl/show?86045 (http://www.nycsubway.org/perl/show?86045)

interior but look at left and see at r62/r68 pole at disability seat
http://www.nycsubway.org/perl/show?97418 (http://www.nycsubway.org/perl/show?97418)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on August 30, 2012, 08:03:08 am
interior
http://www.nycsubway.org/perl/show?97410 (http://www.nycsubway.org/perl/show?97410)

exterior cab side
http://www.nycsubway.org/perl/show?58881 (http://www.nycsubway.org/perl/show?58881)

exterior Front
http://www.nycsubway.org/perl/show?61261 (http://www.nycsubway.org/perl/show?61261)

interior
http://www.nycsubway.org/perl/show?95258 (http://www.nycsubway.org/perl/show?95258)

closeup fronts right logo
http://www.nycsubway.org/perl/show?77373 (http://www.nycsubway.org/perl/show?77373)

interior
http://www.nycsubway.org/perl/show?97418 (http://www.nycsubway.org/perl/show?97418)

side
http://www.nycsubway.org/perl/show?97520 (http://www.nycsubway.org/perl/show?97520)

see at roof
http://www.nycsubway.org/perl/show?59410 (http://www.nycsubway.org/perl/show?59410)

closeup interior
http://www.nycsubway.org/perl/show?86045 (http://www.nycsubway.org/perl/show?86045)

interior but look at left side's disability seat has a r62/r68 pole
http://www.nycsubway.org/perl/show?97418 (http://www.nycsubway.org/perl/show?97418)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on August 30, 2012, 11:03:28 am
Thanks for the links mudwrestle!

I am having some issues with the MTA logo object (I simply want it to not exist lol, I put an MTA logo directly on the side texture instead), and I can't manage to figure out where the number plate objects are so I can move them to their
appropriate spots on the R38.  Could I just send you the train to remove the MTA logo object and move the number plates?



On a side note, if anyone out there has a picture of the R38's builders plate, please post it here or give me a link to it.




Right now, I am working on converting the R32 front to look like an R38 front.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on August 30, 2012, 11:06:55 am
Thanks for the links mudwrestle!

I am having some issues with the MTA logo object (I simply want it to not exist lol, I put an MTA logo directly on the side texture instead), and I can't manage to figure out where the number plate objects are so I can move them to their appropriate spots on the R38.  Could I just send you the train to remove the MTA logo object and move the number plates?



On a side note, if anyone out there has a picture of the R38's builders plate, please post it here or give me a link to it.
Please check http://www.bvestation.com/contributor/index.php (http://www.bvestation.com/contributor/index.php) to see what resources I and other developers
need to in order to finish our projects.



Right now, I am working on converting the R32 front to look like an R38 front.

Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on August 30, 2012, 03:51:39 pm
another 12 hours of work:
(http://s10.postimage.org/b1wb2zmgn/38foooammmm.png)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: SubwayTrainOperator5 on August 30, 2012, 04:56:54 pm
It looks great! But the top, non-fluted half of the side could be better, it should be shinier so it looks more realistic
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on August 30, 2012, 04:58:25 pm
That is in the works as we speak. The entire side of the car is a bit too dark. I just need to figure out the solution to a weird issue I'm experiencing in which one side of the train is brighter than the other.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Threxx1 on August 30, 2012, 07:11:39 pm
None of the pictures show up for me...
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: SubwayTrainOperator5 on August 30, 2012, 07:28:16 pm
None of the pictures show up for me...

Just right click the box and icon that appears where the picture should be, click "Copy Image URL", and paste it into the address bar in a new tab
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Gong Gahou on August 31, 2012, 08:24:48 pm
I can't see them either. They just don't exist at all. But pressing the "Quote" button reveals the link, which directs you to the image.
DJ Hammers, next time you post images from postimage.org, click "Copy Image Location" instead of copying the link shown on the address bar, and then put that between the img tags. That might help the users who can't see your pictures on this thread.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on August 31, 2012, 08:35:08 pm
I can't see them either. They just don't exist at all. But pressing the "Quote" button reveals the link, which directs you to the image.
DJ Hammers, next time you post images from postimage.org, click "Copy Image Location" instead of copying the link shown on the address bar, and then put that between the img tags. That might help the users who can't see your pictures on this thread.

same as my firefox cant see them except internet explorer and google chrome can see them -.-
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Mr Railfan on August 31, 2012, 08:40:04 pm
I suggest rehosting them on Imgur.com , i have yet to encounter a better photohosting site.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on August 31, 2012, 08:55:29 pm
Yeah something seems to have changed as my previous method of posting images no longer works. I'll rehost them on Imgur.com.


I'll have a progress update out soon.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on September 22, 2012, 11:03:53 pm
If you know the differences between the R32 and the R38 on the interior, you will understand the significance of this pic:
(http://i.imgur.com/vg5DC.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on September 23, 2012, 01:48:31 am
(http://i.imgur.com/I1KBr.jpg)
Builder's plate, and number sticker
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on September 23, 2012, 02:52:21 am
Couple more hours of work..
(http://i.imgur.com/zIf43.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on September 23, 2012, 03:47:40 am
Couldn't fall asleep, so I went ahead and did some work on the ceiling lol
(http://i.imgur.com/bqJcF.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on September 23, 2012, 06:32:46 am
good job my boy ;)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on September 23, 2012, 10:31:48 pm
Finished the number plates, but now i have to work on the number stickers too -_-. It's tedious
(http://i.imgur.com/tkguP.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on September 24, 2012, 12:03:28 am
Did some work on the doors
(http://i.imgur.com/vVByfh.jpg)

A little eye candy:
(http://i.imgur.com/Ze2Mzh.png)

Builder's plate
(http://i.imgur.com/t0ppt.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Pegasusleos4 on September 24, 2012, 06:54:09 pm
Speechless  :o. Amazing job DJ Hammer, keep up the good work  :) :D ;D
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Brighton Express on September 24, 2012, 07:08:19 pm
DAMN  :o. Great job DJ.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on September 24, 2012, 11:42:38 pm
Had a long day, so I'm a bit too tired to do a lot of work. I did do some work on the doors to make them look a bit "neater" and I lightened up the color of the carbody a bit to match them.
(http://i.imgur.com/eC3A6.jpg)


I'm trying to do a small amount of work each day or two, and post small updates relatively frequently so you guys get a better understanding of just how much attention to detail and thought goes into making a BVE project.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Bombardier01800 on September 25, 2012, 01:15:58 am
(http://i.imgur.com/t0ppt.jpg)
Non-stop improving indeed
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: SubwayTrainOperator5 on September 25, 2012, 10:50:22 pm
Not bad!
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on September 26, 2012, 12:39:45 am
(http://i.imgur.com/MdFxV.png)
Did some more brightness and color corrections to the carbody, and with the help of Mudwrestle, finished the number plates. Now, on the the ends of the car (Which at present are R32 GE front ends)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on September 26, 2012, 01:13:11 am
New Seats!
(http://i.imgur.com/uFOqF.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on September 27, 2012, 08:39:00 pm
Added in an R38 bonnet
(http://i.imgur.com/A8uzW.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on September 27, 2012, 10:32:21 pm
(http://i.imgur.com/VRU6b.jpg)
3 more hours of work.... did a lot of color and brightness corrections, etc.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Rikabs on September 28, 2012, 12:07:54 am
Looks good. Question though. How come you removed the black box that you guys wanted inside the trucks. Thought it made it more realistic?  ???
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on September 28, 2012, 12:28:21 am
The exterior is based off of mudwrestle's R32 exterior, which already had the black box removed. I want to add it back in. I'll get around to it once I finish the rest of QA/QC.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on September 28, 2012, 05:31:08 am
Looks good. Question though. How come you removed the black box that you guys wanted inside the trucks. Thought it made it more realistic?  ???

well i took it out for reason...

check if my pc can wheel rotating...

i forget to put it back on
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Brighton Express on October 01, 2012, 08:39:05 pm
Wow DJ I can really see the differences in this car from your last release. Great job to you and Mudwrestle, I can recognize some of his designs on the car, such as the lights.

What is the news about the cab? I know you are going to change the handle to the one that Mr Railfan has, but are you making any changes other than that?
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on October 01, 2012, 10:12:55 pm
Wow DJ I can really see the differences in this car from your last release. Great job to you and Mudwrestle, I can recognize some of his designs on the car, such as the lights.

What is the news about the cab? I know you are going to change the handle to the one that Mr Railfan has, but are you making any changes other than that?
Since I don't have a full cab shot to use as a panel, I have to stay with this 70% photorealistic panel. I'm doing some changes to make it easier on the FPS, and I may do some texture work if I have resources to do it.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Brighton Express on October 01, 2012, 11:41:40 pm
Since I don't have a full cab shot to use as a panel, I have to stay with this 70% photorealistic panel. I'm doing some changes to make it easier on the FPS, and I may do some texture work if I have resources to do it.

Wow, sounds great. Keep up the good work.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on October 02, 2012, 12:02:22 am
Speaking of which....

Did more color and brightness corrections to the exterior:
(http://i.imgur.com/E9Iu4h.jpg)

Almost done with the blind ends:
(http://i.imgur.com/smWjKh.jpg)

Did some interior texture work:
(http://i.imgur.com/1MdLrh.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on October 14, 2012, 07:35:11 am
i always do love myself

(http://mudbvedays.webs.com/R38Front_1.jpeg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on October 14, 2012, 07:46:21 am
(http://mudbvedays.webs.com/R38Front_2.jpeg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Train man on October 14, 2012, 08:04:43 am
Great work mudwestle and dj hammers!
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on October 14, 2012, 08:19:37 am
yea thanks
...
heres video ....

OpenBVE - Preview R38 by Mudwrestle & DJ Hammers (http://www.youtube.com/watch?v=4W0B49wh5Nc#)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Pegasusleos4 on October 14, 2012, 11:29:20 am
Amazing Work Mudwrestle and Dj Hammers. It look so realistic, keep up the amazing work on this train. Can't wait to drive this train  :) :D ;D
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Brighton Express on October 14, 2012, 12:51:00 pm
Looking good Mud and DJ.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on November 10, 2012, 12:16:30 am
(http://i.imgur.com/QBhfD.jpg)
Finally got power back.... now back to work.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on November 10, 2012, 12:32:22 am
I now implemented some of Mudwrestles changes, with a couple of my own tweaks (Color edits, brightness adjustments)
(http://i.imgur.com/9yXpJ.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on November 10, 2012, 01:37:34 pm
Welcome back bro ....

My homes city has no power since Oct 29 =(

...

This R38 looks great
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Brighton Express on November 10, 2012, 03:23:42 pm
A suggestion. You should talk to Chris about getting some headlights and taillights for this train.

(http://imageshack.us/a/img607/6533/openbve2012102314472977.png)

(http://imageshack.us/a/img833/6513/openbve2012102314473521.png)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on November 10, 2012, 03:44:37 pm
A suggestion. You should talk to Chris about getting some headlights and taillights for this train.
Already in the works, don't worry.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Threxx1 on November 11, 2012, 02:12:19 pm
OK... I think the R32 and R38 should have a HQ release with 3D poles. It's more realistic, and a LQ release could be made if many people have FPS problems.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: BStyles on November 19, 2012, 06:22:41 am
3D poles are completely unnecessary, for either version. Something like that would look a lot better in Trainz Railroad Simulator where detail is a big issue and the graphics are driven from computer resources and the video card. Keep in mind that making 3D poles(in other words, cylindrical objects) would create too many polygons when drawn out in Sketchup, for a program of this kind, and may alone just top the train's current poly count and lower frame rates significantly. This train is already high in quality and perfection, and even I can't ask for any more than that.

BStyles
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on January 18, 2013, 07:36:08 pm
(http://i46.tinypic.com/90v9n7.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on January 19, 2013, 11:05:52 pm
Just a little update for you guys -
I'm doing some work on the R38 right now behind the scenes. Mostly physics work, very little graphics work. I'm getting closer to finishing it. Mudwrestle is adding 3D headlights and a couple of other tweaks, and I'll do some finishing touches, some BETA testing, and then release.


Keep in mind, just because I'm not posting in my threads, doesn't mean I'm not working on my projects.

Here's a little preview video I made for you guys:
NYCTA R38 v4 for OpenBVE Preview (http://www.youtube.com/watch?v=Vb-LL8Dy45A#ws)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Threxx1 on January 20, 2013, 12:01:53 am
How come the rollsigns are scrolling by themselves?
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on January 20, 2013, 12:41:24 am
It's because I'm using a mac. The plugin that runs the rollsigns and the headlights, along with a couple other functions, only functions correctly on windows computers.

On a Mac or Linux computer, the rollsigns will sometimes scroll randomly.

I'm hoping for somebody to take up the task of developing a cross-platform plugin so rollsigns can work on Mac and Linux computers.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: rstar on February 23, 2013, 08:42:36 pm
(http://i.imgur.com/GaCR169.jpg) (http://imgur.com/GaCR169)
(http://i.imgur.com/ZLazyji.jpg) (http://imgur.com/ZLazyji)
(http://i.imgur.com/ZVOHLxI.jpg) (http://imgur.com/ZVOHLxI)
R38 on the (A)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Nicholas Blonski on February 24, 2013, 12:29:18 am
Looks amazing! Very nice work.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: PelhamLocal on March 01, 2013, 03:49:08 pm
SWEET ;D
the only thing is that the headlight fixtures are a single one with two bulb holes instead of 2 seperate fixtures.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on April 27, 2013, 09:29:09 pm
Sorry I haven't updated you guys much on this project. School has been an absolute killer.

The 3D headlights are almost done, and I'm working a lot on getting the doors to be more FPS-friendly.

Expect a release this summer.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on April 28, 2013, 06:12:19 am
(http://i.imgur.com/NoDzwH6.png)

(http://i.imgur.com/2RXld4j.png)

(http://i.imgur.com/BoLoKLE.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on April 28, 2013, 08:13:39 am
(http://i.imgur.com/97Z4Lzw.png)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on April 28, 2013, 08:38:22 am
OpenBVE - Preview R38 Exterior P.1 (http://www.youtube.com/watch?v=BlF0zN76f9c#ws)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: bigbellymon4 on April 28, 2013, 07:46:30 pm
Great work!!!! The train has many awesome realistic features!!!
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on April 29, 2013, 06:19:24 pm
(http://i.imgur.com/Vs51VUm.png)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Pegasusleos4 on April 29, 2013, 06:43:06 pm
Speechless. Amazing work Mudwrestle, Keep up the good work. Can't wait to drive this train  :) :D ;D
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: ErrorMacro11 on April 30, 2013, 10:49:09 am
(http://i.imgur.com/Vs51VUm.png)
Word of advice. update the exterior, it looks very dull. and not silver like
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: ErrorMacro11 on April 30, 2013, 10:50:19 am
Word of advice. update the exterior, it looks very dull. and not silver like
also, will the R38 have a special consist with the R32 when its released
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: trainbrain on April 30, 2013, 12:30:45 pm
It's because I'm using a mac. The plugin that runs the rollsigns and the headlights, along with a couple other functions, only functions correctly on windows computers.

On a Mac or Linux computer, the rollsigns will sometimes scroll randomly.

I'm hoping for somebody to take up the task of developing a cross-platform plugin so rollsigns can work on Mac and Linux computers.

cause .dll (OS_ATS1.dll) is a plugin/file/app extension that is unique to Windows and is not Mac compatible
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: BeeRyDavis on April 30, 2013, 04:18:06 pm
This train is coming together nicely. Looks like you just need to fix the headlights
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on May 05, 2013, 05:50:17 pm
(http://i.imgur.com/UwiDFRL.png)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: PelhamLocal on May 05, 2013, 06:00:18 pm
SLAMMIN :o ;D!!!!
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on May 05, 2013, 06:26:58 pm
OpenBVE - Preview R38 Exterior P.2 (http://www.youtube.com/watch?v=Jc9BK7ZtfSU#)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on May 05, 2013, 07:27:06 pm
(http://i.imgur.com/5K1ZdwZ.png)
(http://i.imgur.com/ehzKbZg.png)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Threxx1 on May 06, 2013, 09:36:25 am
Those headlights are nice! You two are doing nice work with this train.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: trainbrain on May 06, 2013, 12:21:31 pm
Yep ditto what Threxx said
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers - UPDATE
Post by: Dj Hammers on May 06, 2013, 09:44:59 pm
I'll just leave this here....
(http://i.imgur.com/Jv2LWlX.jpg)
(http://i.imgur.com/HTO1eO6.jpg)
(http://i.imgur.com/E6armW7.jpg)

A big thanks to ErrorMacro11 for the new textures!
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: PelhamLocal on May 06, 2013, 10:14:49 pm
HHHHHHHHHHHHHHHHHHHHHHHHHHOOOOOOOOOOOOOOOOOOOOOOLLLLLLLLLLLLLLLLLLLLLYYYYYYYYYYYYYYY SSSSSSSSSSSSSSSSSSSSHHHHHHHHHHHHHHH SHUT YO MOUTH ;D

CPW HERE I COME!!! :D
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: trainbrain on May 07, 2013, 12:31:44 pm
Damn this is looking real nice
Great job to DJ Hammers/ErrorMacro11/Mudwrestle
cause this train is great
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on May 08, 2013, 08:26:35 am
OpenBVE - Mixed with R32 Phase 1 and R38 (http://www.youtube.com/watch?v=qcGcZwOTIq4#ws)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on May 08, 2013, 08:36:02 am
(http://i.imgur.com/amY6Sq4.png)

(http://i.imgur.com/Y7k1PbG.png)

(http://i.imgur.com/Tq5LemP.png)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on May 08, 2013, 08:40:50 am
(http://images.nycsubway.org/i97000/img_97443.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on May 08, 2013, 11:30:25 am
OpenBVE - R32 Phase 1/R38 Testing left at 88th Street (http://www.youtube.com/watch?v=qT917-PY814#ws)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers - Some Updates
Post by: Dj Hammers on June 06, 2013, 12:53:53 am
Just some more eye candy for you guys. errormacro and I spent a lot of time tweaking some textures, and I did some more physics work.
(http://i.imgur.com/D2zf6i6.jpg)
(http://i.imgur.com/e26MQFl.png)
(http://i.imgur.com/ynLazxf.png)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: JRSrailsimmer on June 06, 2013, 06:51:25 am
Wow talk about high quality! I thought i was looking at actual photos I had to double take a look lol its looking absolutely gorgeous DJ Hammers
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: trainbrain on June 06, 2013, 08:41:03 am
Wow DJ Hammers and everyone else working on this train, you all have done a great job.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on June 07, 2013, 12:13:06 am
I've been working some more on the textures, trying to get everything to match up brightness-wise:
(http://i.imgur.com/RS0zRfV.jpg)

Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: BStyles on June 07, 2013, 08:32:27 pm
Rstar and I are working on a supplement for those trucks, if you would like to wait a bit longer to release. The new ones will be the actual trucks meant for this train.

BStyles
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on June 09, 2013, 12:18:17 am
Added the glow from the frontlight that is used to light up the flipdot sign on the R38:
(http://i.imgur.com/UMrHFhs.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: rstar on June 11, 2013, 03:16:11 pm
Keep up the good work bro.
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on June 15, 2013, 11:11:41 pm
(http://i.imgur.com/gLD5o5x.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on June 16, 2013, 04:54:06 pm
squeak squeak squeakzz done. look wat i code R38's wall?

(http://i.imgur.com/esrclR8.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on June 19, 2013, 02:20:24 am
Mudwrestle and I have done a lot of work on the window and door frames. The R38 now has 3D interior walls and doorposts!
(http://i.imgur.com/088kKBX.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: alanxd40B65 on June 19, 2013, 02:32:29 am
new level shit right here
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: PelhamLocal on June 19, 2013, 07:15:44 pm
YO!!!!  :o :D
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on June 20, 2013, 03:51:03 am
Did a lot more work today. Cleaned up a lot of textures and neatened everything up. Still have some work left to do though, but release is coming soon!
(http://i.imgur.com/HPRqqeL.jpg)
(http://i.imgur.com/s1Blso3.jpg)
(http://i.imgur.com/daX6sME.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: shiwund on June 20, 2013, 08:28:01 am
I must say I am impressed with that work.. :)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: EduardoSGibson on June 20, 2013, 09:30:05 am
It looks really nice, can't wait for the release!
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on June 20, 2013, 02:53:32 pm
errormacro11 and I are working on the flipdots to make them more realistic
(http://i.imgur.com/rP0rYtM.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: PelhamLocal on June 20, 2013, 07:06:49 pm
 :o :o :o :o :o :o :D
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers - BIG Cab Update
Post by: Dj Hammers on July 09, 2013, 12:44:09 am
Thanks to Mr. Railfan, the R38 now has a 100% Photorealistic cab!


Keep in mind that the cab is not fully finished, Mr. Railfan and I are working on further improving it.



Here's some detailed eye candy:

Stopped at a station with the doors open
(http://i.imgur.com/tIFBro6.jpg)


The controls
(http://i.imgur.com/CfaibqV.jpg)


In the dark
(http://i.imgur.com/UD0goXA.jpg)


Approaching a station
(http://i.imgur.com/4Fr2FMj.jpg)


Taking Power
(http://i.imgur.com/SrgmRmf.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: alanr179 on July 09, 2013, 04:13:48 am
Wow all I got to say is omg I didn't see that one coming that r38 is amazing
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: ghosttarin on July 09, 2013, 11:14:54 pm
this is going to come out nice
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on July 10, 2013, 04:59:07 pm
The exterior is pretty much done, just a some work on the interior poles remains.
(http://i.imgur.com/b6a5vIH.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on July 24, 2013, 07:15:37 pm
Did some work on the rollsign and door indicator textures
(http://i.imgur.com/4YFDvCd.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: PelhamLocal on August 04, 2013, 01:16:45 pm
I CAN'T WAIT!!!
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on August 17, 2013, 05:04:34 pm
new pole standings
(http://i.imgur.com/AuCqO99.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on August 17, 2013, 08:14:27 pm
(http://i.imgur.com/s9LlAlr.jpg)
Title: Re: Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: PelhamLocal on August 18, 2013, 12:25:39 pm
SWEET!!!!
Title: Re: (WIP) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on September 12, 2013, 07:52:33 pm
I know I haven't updated this thread much, but Mudwrestle and I have been working on the R38 regardless.

Mudwrestle put a lot of work in to making a 3D underbody for the R38. Here's some screenshots:
(http://i.imgur.com/F1B0MmV.jpg)
(http://i.imgur.com/JktsboY.jpg)

This train is nearing completion. Some more work on the interior poles has the be done, and stuff has to be neatened up and polished here and there. I'm hoping to get the R38 released either with the Q line or before the end of November (depending on which comes first).
Title: Re: (WIP) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Brighton Express on September 13, 2013, 12:01:29 am
Wow, you guys killed it with the R46, now this, a pretty well developed skeleton of the R68, I see an awesome static R40 which could be a potential future project, and I see the R143 and R160 in a few screenshots form time to time. You guys have it made as far as trains go. Great job once again.
Title: Re: (WIP) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on October 13, 2013, 06:05:33 pm
The R38 exterior is close to finished. I know that the release date for the R38 has been pushed back around 4 months or so, but this was done because of an unperceived drop in the amount of free time I have, as well as to facilitate the completion of a more detailed 3D exterior model to complement the Q line.

Mudwrestle is close to finishing the underbody and exterior bonnet of the R38, following which I will complete some optimization and sound work, following which the train will be released.

Here's some screenshots of the R38 running on the Q line. These have also been posted in the Q line thread:
(http://i.imgur.com/76k2fMw.png)


View Leaving Queensboro Plaza:
(http://i.imgur.com/fK0NsBX.png)


Flying through the 60th Street Tube:
(http://i.imgur.com/VPIkh82.png)


Lexington Avenue - 59th Street:
(http://i.imgur.com/WCTbNq3.png)


Timers on the Approach to 5th Avenue:
(http://i.imgur.com/x4b2KpP.png)


Crossing the Manhattan Bridge:
(http://i.imgur.com/4UmTJ63.png)
Title: Re: (WIP) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Nicholas Blonski on October 13, 2013, 06:42:33 pm
Looks gorgeous! I'm impressed with the realism! This will definitely be an iconic release.
Title: Re: (WIP) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: rstar on October 13, 2013, 08:39:49 pm
Can't wait to hear those 5GE1257E1 motor.  ;D
Title: Re: (WIP) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: PelhamLocal on October 13, 2013, 08:48:24 pm
WORD! ;D
Title: Re: (WIP) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on October 15, 2013, 08:01:41 am
Some more updates:

(http://i.imgur.com/ZFED3JS.jpg)
(http://i.imgur.com/I6F2lJY.jpg)
(http://i.imgur.com/W5HR72Z.jpg)
Title: Re: (WIP) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: PelhamLocal on October 15, 2013, 03:37:57 pm
Nice!
Title: Re: (WIP) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: R160Thug#1863 on October 17, 2013, 07:02:58 am
Looks really great bro. keep it up!

Now if you excuse me, I will be digging a grave for my low-end computer.
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on April 15, 2014, 01:03:29 am

The long awaited updated R38 has been released. This release features a fully 3D exterior with changeable animated signage and pivoting trucks. The train will be further updated in the summer as well.

(http://www.bvestation.com/uploads/committee/R38Logo.png)
Download Link (http://www.bvestation.com/downloadinfo.php?id=81)

Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Pegasusleos4 on April 16, 2014, 11:54:44 am
Some of the objects are missing because i couldn't put it in to my train directory folder. The problem was that some of the object file name was too long. Is there any way around this because without these object i couldn't be able to load the train completely. Overall this train look so amazing and so realistic. Great job everyone who contribute to this project. :)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on April 16, 2014, 05:19:22 pm
Some of the objects are missing because i couldn't put it in to my train directory folder. The problem was that some of the object file name was too long. Is there any way around this because without these object i couldn't be able to load the train completely. Overall this train look so amazing and so realistic. Great job everyone who contribute to this project. :)
That's odd. Can you post a screenshot of what happens when you try to put the R38 in the train directory folder?
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Pegasusleos4 on April 16, 2014, 08:08:40 pm
opps my bad. I meant the R32
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on April 16, 2014, 08:27:45 pm
opps my bad. I meant the R32
Regardless, can you post a screenshot? It's hard to figure out how to fix the problem without an idea of what the OS is saying.
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Pegasusleos4 on April 17, 2014, 12:28:25 pm
Here is the link.
http://s1275.photobucket.com/user/PegasusLeos4444/media/R32ErrorMovingintothetraindirectoryfolder_zpsebbcad08.jpg.html (http://s1275.photobucket.com/user/PegasusLeos4444/media/R32ErrorMovingintothetraindirectoryfolder_zpsebbcad08.jpg.html)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on April 19, 2014, 10:53:49 pm
Here is the link.
http://s1275.photobucket.com/user/PegasusLeos4444/media/R32ErrorMovingintothetraindirectoryfolder_zpsebbcad08.jpg.html (http://s1275.photobucket.com/user/PegasusLeos4444/media/R32ErrorMovingintothetraindirectoryfolder_zpsebbcad08.jpg.html)
That's incredibly odd. The file name should be a more than acceptable length for any modern operating system. I think the issue may be that the destination folder name length is too long. Try shortening the name of the folder you are putting the train in to.


In other news...

As of April 20th the R38 has been updated with improved braking physics, sounds and some cab/Panel adjustments. Enjoy!
Download Link (http://www.bvestation.com/downloadinfo.php?id=81)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: thefamemonster on April 25, 2014, 10:53:45 am
I don't know why but when I use the R38 on the Q to Brighton its lagging. Terrible
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on April 25, 2014, 11:36:24 am
I don't know why but when I use the R38 on the Q to Brighton its lagging. Terrible
is this only on the Q line or other lines as well?

Also, what are your computer specs?
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: thefamemonster on April 25, 2014, 11:59:18 am
The N also. But when I try it on the A it runs perfectly (all trains run perfectly on the A)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on April 25, 2014, 12:45:42 pm
The N also. But when I try it on the A it runs perfectly (all trains run perfectly on the A)
thats because the Q and N are more graphics intensive than the A. If you want it to lag less, you would have to invest in a faster computer.
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: thefamemonster on April 25, 2014, 03:47:06 pm
Well for example the R142 is working really good and doesnt lag anywhere. And it's the only train I can use for the V line. Btw do you know anything for it's update (cause I really want them to put some real wheels) or the update of the Manhattan bound 7? They kept us in touch with the progress before but there ain't anything new...
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: YankeesPwnMets on April 25, 2014, 06:37:54 pm
Is this the millionth time you've asked about the (7)? When the developers have updates, they'll post them. Otherwise, there are no updates. Many developers work. Some have school and work. Others have a family to take care of. I wake up each morning at 6AM, leave my door at 7 and sometimes don't get home sometimes until as late as 10 or even 11 PM, with even more work waiting for me at home. Some developers have it worse and work non stop and simply don't have time for routes. Some routes can go months with literally zero progress made because the developers simply have no time. The 7 will be released within a matter of time and constantly asking about it won't make it come out any sooner.

As for the R142, that is in development to. If you want an R142 with animated wheels, you can go learn, experiment, play around and add them yourself for the time being like me
https://www.youtube.com/watch?v=VMi4IIHjE8k (http://www.youtube.com/watch?v=VMi4IIHjE8k#)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Dj Hammers on April 25, 2014, 07:26:46 pm
Well for example the R142 is working really good and doesnt lag anywhere. And it's the only train I can use for the V line. Btw do you know anything for it's update (cause I really want them to put some real wheels)
once the R142 has animated 3D wheels implemented on it, it will probably start lagging your computer as well. It's hard to have the best of both worlds.

What are your computer specs?
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on July 04, 2014, 01:27:21 am
(http://i.imgur.com/hwIy4BC.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on July 04, 2014, 09:19:34 am
(http://i.imgur.com/vuWxgq6.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: PelhamLocal on July 04, 2014, 01:24:01 pm
Nice!
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on July 05, 2014, 07:33:39 pm
(http://i.imgur.com/tA8XT9V.png)
(http://i.imgur.com/F0rVRI8.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on July 06, 2014, 04:15:50 pm
(http://i.imgur.com/yacqThI.png)
(http://i.imgur.com/tOUiAqd.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on July 06, 2014, 06:35:02 pm
(http://i.imgur.com/a2jTads.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: PelhamLocal on July 06, 2014, 08:15:02 pm
Beautiful!
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: nightmare402 on July 07, 2014, 01:27:07 pm
(http://i.imgur.com/a2jTads.png)

(http://i1361.photobucket.com/albums/r662/tmoneycarter3/trainz2014-07-0703-20-44-44_zps749ed47f.png) (http://s1361.photobucket.com/user/tmoneycarter3/media/trainz2014-07-0703-20-44-44_zps749ed47f.png.html)

i knew it look familiar
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on July 08, 2014, 06:06:01 am
(http://i.imgur.com/y7Qf8pn.png)
(http://i.imgur.com/Wdaa7Vz.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: PelhamLocal on July 08, 2014, 03:41:35 pm
Damn! Beautiful!
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on July 08, 2014, 08:41:18 pm
(http://i.imgur.com/yt2owsL.png)
(http://i.imgur.com/J5RhefQ.png)
(http://i.imgur.com/FzkhFiK.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on July 09, 2014, 09:24:47 pm
(http://i.imgur.com/VCegb0z.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: PelhamLocal on July 09, 2014, 10:11:50 pm
NIce!
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on July 12, 2014, 10:32:51 am
R38 Pre GOH A/C Version:
(http://i.imgur.com/qZl6LGK.png)
(http://i.imgur.com/wSAg1ao.png)

R38 Pre GOH Fan Version:
(http://i.imgur.com/nCHaxEj.png)
(http://i.imgur.com/gT2pg3R.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: PelhamLocal on July 13, 2014, 07:19:50 am
Beautiful!
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on February 18, 2015, 12:04:24 pm
I have a plan to rebuild my R38 Models are Pre GOH and GOH for improvement shapes than before i made them all.
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on April 14, 2015, 02:16:31 pm
New R38 GOH has been start working now. So stay tuned!
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on April 17, 2015, 06:35:38 am
new face for r38 goh

(http://i.imgur.com/j8qSzRd.jpg)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Allyn65 on April 17, 2015, 09:08:03 am
Nice work
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: PelhamLocal on April 17, 2015, 09:28:40 pm
NICE! I can't wait!
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on May 03, 2015, 04:25:50 pm
say hi to new r38 goh for openbve ;)

(http://i.imgur.com/dZB9gEr.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Ramirez1523 on May 03, 2015, 10:50:56 pm
Lookin Good!! :)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on May 04, 2015, 08:56:38 am
coming soon :)

(http://i.imgur.com/1KFjaPg.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on May 04, 2015, 09:07:59 am
(http://i.imgur.com/5fhRnaF.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on May 08, 2015, 09:09:07 am
(http://i.imgur.com/YvG5w8g.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on May 08, 2015, 09:15:28 am
still taking care of interior...

(http://i.imgur.com/i3ZAKKt.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Fox-179 on May 08, 2015, 11:49:20 am
I admire at what you're doing and what you do, but do you mind adding comments to the photos you post because several times I personally can't tell what is being polished up meaning the pictures look the same to me every time, albeit I'm sure there are minor differences(assuming). I can tell that they received a new set of trucks as well as looks as if you enhanced the R-38 front logo a bit. Other than that all the interior/exterior shots look the same.
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on May 08, 2015, 09:02:58 pm
I admire at what you're doing and what you do, but do you mind adding comments to the photos you post because several times I personally can't tell what is being polished up meaning the pictures look the same to me every time, albeit I'm sure there are minor differences(assuming). I can tell that they received a new set of trucks as well as looks as if you enhanced the R-38 front logo a bit. Other than that all the interior/exterior shots look the same.

different between new r38 goh and old r38 goh yall have.

for old r38 goh, too much load textures and bad textures and junk file. i made little flaws in there are seats and doors...

for new r38 goh, new shape and new texture and fps improvement and less junk file. correct doors and seats shape
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on May 09, 2015, 05:11:32 am
New R38 GOH and Old R38 GOH

(http://i.imgur.com/IhT2wgz.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on May 10, 2015, 09:23:42 am
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on May 10, 2015, 11:08:34 am
(http://i.imgur.com/CFT6NkQ.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on October 19, 2015, 09:45:24 am
Show off how i am doing with this

Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: Psycho William on October 20, 2015, 09:12:34 am
Almost done

(http://i.imgur.com/LZFiRLD.png)
(http://i.imgur.com/m70mZBn.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: PelhamLocal on October 20, 2015, 06:17:22 pm
Man What a Beauty! Now we just need old skool routes
Title: Re: (RELEASED) Official Update Thread For The NYCTA R38 By Dj Hammers
Post by: BStyles on March 12, 2017, 07:01:30 pm
Topic locked due to inactivity.

BStyles