BVEStation Forums

BVE => BVE/OpenBVE Support => Topic started by: TyroneR44 on October 11, 2013, 11:26:37 pm

Title: R46 LCD and Letter sign
Post by: TyroneR44 on October 11, 2013, 11:26:37 pm

What are the controls to change the letter sign and the LCD on the R46 ?????

Title: Re: R46 LCD and Letter sign
Post by: Nicholas Blonski on October 12, 2013, 02:05:18 am

Pressing the 6 key activates/deactivates "LAST STOP" reading.

Pressing the 7 key starts/stops scrolling the LCD displays

Pressing the 8 key starts/stops scrolling the front route sign

Pressing the 9 key toggles the LCD backlight.

Title: Re: R46 LCD and Letter sign
Post by: TyroneR44 on October 12, 2013, 10:54:42 am

Thanks

Title: Re: R46 LCD and Letter sign
Post by: Nicholas Blonski on October 12, 2013, 02:50:04 pm

Quote from: TyroneR44 on October 12, 2013, 10:54:42 am

Thanks

No problem at all!

Title: Re: R46 LCD and Letter sign
Post by: R32Ctrain on October 20, 2013, 04:22:10 pm

I'm also having trouble with the R46
0: turns on interior lights
9: turns on LCD
8: to change LCD sign
4: to activate "LAST STOP" on LCD sign
2: to change motorperson

I cannot change front rollsign

from the train.dat file
#Device
1              ; Ats
0              ; Atc
0              ; Eb
0              ; ConstSpeed
0              ; HoldBrake
-1             ; ReAdhesionDevice
0              ; Reserved (not used)
0              ; PassAlarm
2              ; DoorOpenMode
2              ; DoorCloseMode

Title: Re: R46 LCD and Letter sign
Post by: Nicholas Blonski on October 20, 2013, 09:23:35 pm

Try re-downloading the train. By default, the controls should be what I had stated.

Title: Re: R46 LCD and Letter sign
Post by: R32Ctrain on October 22, 2013, 04:49:49 pm

I tried those keys - they won't work. May have to do with the ATS plugin. Turns out, when I apply the brakes,
the interior lights turn on, and when in either forward or reverse,
the LCD sign lights up. I can not change the LCD or roll sign.

Title: Re: R46 LCD and Letter sign
Post by: Nicholas Blonski on October 22, 2013, 08:36:11 pm

Quote from: R32Ctrain on October 22, 2013, 04:49:49 pm

I tried those keys - they won't work. May have to do with the ATS plugin. Turns out, when I apply the brakes,
the interior lights turn on, and when in either forward or reverse,
the LCD sign lights up. I can not change the LCD or roll sign.

What you are stating is a common issue known with many newer trains (with changeable rollsigns), and it appears that the issue is related to your antivirus software. Try disabling your antivirus and see if it will help. If not, try re-downloading the train (if you have not done so already).