BVEStation Forums

BVE => General BVE/OpenBVE => Topic started by: peacemak3r on January 28, 2011, 09:09:51 pm

Title: R46
Post by: peacemak3r on January 28, 2011, 09:09:51 pm: The R46 from the downloads section used to work for me in OpenBVE, but not it doesn't. Or maybe there was a download to make it compatible with OpenBVE?

I only used OpenBVE, so don't give me the "just use BVE2/4" mumbo jumbo, I won't use that. So any advice with the error's R46 and OpenBVE would be greatly appreciated.
Title: Re: R46
Post by: Bombardier01800 on January 28, 2011, 09:11:47 pm: Does it just not move? And BTW this is in the wrong place...
Title: Re: R46
Post by: peacemak3r on January 28, 2011, 09:39:59 pm: Yes it doesn't move.

BVE/OpenBVE Support states problems with OpenBVE or BVE only, my problem isn't really OpenBVE problem related, it's the train's file problem. I don't see the complication.
Title: Re: R46
Post by: Orion V CNG #748 on January 28, 2011, 09:43:57 pm: Quote from: r3kamecaep on January 28, 2011, 09:39:59 pm
Yes it doesn't move.

BVE/OpenBVE Support states problems with OpenBVE or BVE only, my problem isn't really OpenBVE problem related, it's the train's file problem. I don't see the complication.
if the train cant move just try re-downloading it, that happened to me one time and i re-downloaded it and it worked.
Title: Re: R46
Post by: Bombardier01800 on January 28, 2011, 09:47:44 pm: Quote from: r3kamecaep on January 28, 2011, 09:39:59 pm
Yes it doesn't move.

BVE/OpenBVE Support states problems with OpenBVE or BVE only, my problem isn't really OpenBVE problem related, it's the train's file problem. I don't see the complication.
It's happened to me before... Just restart the whole route and you should be fine... If still nothing, terminate the application's process, wait about five minutes and try again.

Hope it helps
-Jose.
Title: Re: R46
Post by: error46146 on January 28, 2011, 09:54:00 pm: That is a problem with some of my trains..try re-starting the simulation when that happens.

I am currently working on an update for my 46 as well, I'll try to get that out asap
Title: Re: R46
Post by: Lexington456 on January 28, 2011, 10:03:33 pm: I have the same problem.
Title: Re: R46
Post by: Mr Railfan on January 28, 2011, 10:24:24 pm: well that happened to me quite a few times too . i just dump the brakes a few times and the problem is solved [something is not letting the air out of the brake cylinder or something along those lines ...] . if that still doesnt help restart the route a few times and it should work .
Title: Re: R46
Post by: error46146 on January 28, 2011, 11:02:09 pm: I really don't know what the problem is to be honest, I am currently experimenting with different setups of the brake systems to see if I can fix this. This happens to most of the trains I've made (R160 R142A etc)
Title: Re: R46
Post by: Bombardier01800 on January 28, 2011, 11:04:31 pm: It's never happened to me with any other train though
Title: Re: R46
Post by: Fox-179 on January 29, 2011, 12:45:15 am: This is interesting b\c sometimes that happened to the R-46 also I would start up and the brakes would release but it wouldn't move.It happens every once in a while.It sucks b\c sometimes ya have to restart the Openbve or BVE/4.
Happens with the R-143 also the brakes lock up and it takes off extremely slow which forces me to brake regroup and full power again.Very challenging train experiences.
Title: Re: R46
Post by: Rayvon on January 29, 2011, 12:45:59 am: I experience that sometimes. Just go into full service and flip the reverser into reverse and back to forward. It should work then
Title: Re: R46
Post by: peacemak3r on January 29, 2011, 04:58:22 am: Quote from: Rayvon on January 29, 2011, 12:45:59 am
I experience that sometimes. Just go into full service and flip the reverser into reverse and back to forward. It should work then

I will definitely try this whenever I get a chance to hop back on.

All other advices are appreciated as well!