-
New Tech Trains
(R142, R142A, R143, R179)
Downloads are now available in the Downloads section (http://bvestation.com/downloads.php) or at BVE Routes Wiki (http://wiki.bve-routes.com/index.php/Metro_Transit_%284%29_New_Lots_Local).
(http://i.imgur.com/dUsbx.png) (http://i.imgur.com/Zqj0U.png)
OpenBVE R142 [2012 Preview]
-Features (2), (4) & (5)
OpenBVE R142A [2012 Preview]
-Features (2), (4), (5), (6), & 11-car (7) train.
(http://i.imgur.com/GKB4U.png)
Metro Transit New Lots Line [Version 4]
-Originally Highbridge 8 Line developed by Tjay1724!
-Modified by SIR North Shore.
-Complete with 13 different IRT routes to enjoy.
-Install to your OpenBVE directory & overwrite files if asked!
-If you haven't downloaded it already, the (D) line is required to run this route!
-If you have any questions or comments, feel free to post or leave a pm!
----------------------------------------------------------------------------------------
(http://i.imgur.com/vADCV.png)
OpenBVE R143 [Version 9]
DOWNLOAD (http://www.mediafire.com/?dwc9p8i8qpaju3z)
19 MB
----------------------------------------------------------------------------------------
(http://i.imgur.com/BwQr9.png)
OpenBVE R179 [Version 8]
DOWNLOAD (http://www.mediafire.com/?399302cbbo25hav)
36 MB
-Disclaimer: Have fun!
View the Readme for installation instructions & credits.
----------------------------------------------------------------------------------------
-
nice
-
Very nice indeed, I like it
-
the sound for the propulsion is too low "/
-
Thanks Joseto & Pacific!
@smooth23, it's supposed to be like that. That was recorded from an actual R142 train and it is that low from the inside.
-
the sound for the propulsion is too low "/
The propulsion is that low. Riding the R142 I barely hear the propulsion
-
Updated the link..
-
great job
-
Nice job! It's missing the later notes in the propulsion though, but everything sounds great.
-
I like it but mind making the propulsion and brake release somewhat louder.I like when I brake the HVAC kicks up.
Not my video:
IRT East 125th Street Bound R142 (4) train at 149th Street / Grand Concourse (http://www.youtube.com/watch?v=m3mWQ0WxO88#ws)
But this can help if u get permission.
Brake release,door cls,open,Manual announcement(Ding) and propulsion.
-
You working on a R142A for BVE? Because the motor sounds challenged when it starts up
-
Thanks everyone, and I expect there two be at least 2 different versions of the R142 for version 3.0. One will be like it is now and the other will have the louder brakes & propulsion.
-
When I take the 5 train and the HVAC is off sometimes you don't hear that rub sound at all even if you try to focus on it. Only the R160B/A Alstoms make those sounds. Even though they both have the same motors the brakes are in different locations which makes the sounds different. The propulsion is quite louder than this though even with the HVAC on.
-
Updated again!
-
Is the R152 required? I can't get the exterior/interior to work (the seats and end doors however, DO work).
-
Is the R152 required? I can't get the exterior/interior to work (the seats and end doors however, DO work).
No.Everything is included with the R-142.
-
No, the R152 is not required. It should work right away.
-
(https://lh5.googleusercontent.com/_LfG_N15JU8U/TVr8JlB0FvI/AAAAAAAABkw/jnQufVDxtwg/s640/Troubleshoot.png)
The funny part is that the exterior and interior work in Object Viewer. I've tried deleting the train and installing it over to no avail. Everything is extracted to C:/Program Files/BVE/Train.
-
Make sure your graphics card drivers are updated and that you have the latest version of OpenBVE.
-
I've figured out the problem. I use a program (http://www.softpedia.com/get/Multimedia/Video/Other-VIDEO-Tools/GLDirect.shtml (http://www.softpedia.com/get/Multimedia/Video/Other-VIDEO-Tools/GLDirect.shtml)) that allows one to run OpenGL programs using a DirectX driver a hell of a lot smoother. It seems that this was interfering with the exterior, so I just switched it off.
Nice work!
-
Pwoblem =
Some of the doors in the last car don't open (OPEN|CLOSED, etc...). I don't know if you added it in, or it was a bug, but for some reason it kinda irritates me lol.
-
http://www.youtube.com/embed/hy-9hMKZ4WQ (http://www.youtube.com/embed/hy-9hMKZ4WQ)
Here's what I mean when you can hear the propulsion even while the HVAC is on blast
-
I agree with the people who have been saying the propulsion is really low... Every time I ride a R142 with the HVAC on or off I can ALWAYS hear it loud...
-
It's like with the R142s, the propulsion is the same for all the cars but they all sound different if you know what I mean. The sounds were actually that low in 1101 but for those that want to hear the propulsion, use 6981! And you can swap the loop.wav sounds around for a loud, medium or low HVAC. I really want to get a third version of the R142 though, using Bstyles sounds.
-
Yeah i've noticed that in my opinion, some of the R142s are louder on the inside propulsion-wise.
-
Ok, 4.0 is uploaded with three versions now:
1101 (2 train/low hvac/loud propulsion)
6981 (2 train/loud hvac/low propulsion)
7141 (4 train/loud hvac/loud propulsion)
You can always mix and match the sounds or cars to your liking! And does anyone want a 5 train?
-
I like this ,Nice work and smooth ride for me
-
Ok, 4.0 is uploaded with three versions now:
1101 (2 train/low hvac/loud propulsion)
6981 (2 train/loud hvac/low propulsion)
7141 (4 train/loud hvac/loud propulsion)
You can always mix and match the sounds or cars to your liking! And does anyone want a 5 train?
6981 is a (5) train set. The (2) train sets are the 6301-65xx or 66xx series.
-
I know, that's why I asked! 8) I was going to reskin it to the 5 train but there is no 5 train coming out anytime soon.
@R40R32, thanks!
-
I know, that's why I asked! 8) I was going to reskin it to the 5 train but there is no 5 train coming out anytime soon.
@R40R32, thanks!
Also for 1101 you have that labeled as 2 train when thats a (4) train set.
Umm...may I request 7180 (4) train set plz(change in cab number)
Also basically when the (4) gets done we'll have a (5) train G.O it can be from Crown Hts terminating at 149th Exp track.Also we have a (5) via the 7th Av Line to 42nd St already just need manual and or automated announcements.
-
No we won't, because when the 4 is done we will add that onto the 2, and the 5 shuttle.
BStyles
-
Great train! By the way, is it just me, or does the R153 exterior view look weird when the train is turning?
-
the trains dont have the translateall thing in the train and it doesnt stop at the 10 marker
-
I know, that's why I asked! 8) I was going to reskin it to the 5 train but there is no 5 train coming out anytime soon.
@R40R32, thanks!
Also for 1101 you have that labeled as 2 train when thats a (4) train set.
Umm...may I request 7180 (4) train set plz(change in cab number)
Also basically when the (4) gets done we'll have a (5) train G.O it can be from Crown Hts terminating at 149th Exp track.Also we have a (5) via the 7th Av Line to 42nd St already just need manual and or automated announcements.
I have (5) via 7th Av announcements from Times Sq to 149th Street, the rest of the manhattan stops can be cut/paste from the (2). I recorded in the Unionport Yard with my cousin(T/O) a few years ago, the rest. I would just have to cut/paste for the Brooklyn Stops. I also Have all (5) sounds from Flatbush Av to Eastchester-Dyre and from Eastchester-Dyre to Utica Av And to Bowling Green(To/From) and (5) Shuttle Sounds both ways. Also have Grand Central bound 5 Sounds and the (5) to 149th Street(Upper Level) Sounds.
-
If you could release those announcements, it would be much appreciated.
-
I hope nobody doesn't take this as a insult, but SIR's R142 is just as good or better than trevor's R142
-
I hope nobody doesn't take this as a insult, but SIR's R142 is just as good or better than trevor's R142
I think its better b\c SIR's have HVAC which Trevors didn't have also the sounds are more realistic.But we all have our opinions.
-
the trains dont have the translateall thing in the train and it doesnt stop at the 10 marker
What is translateall?
Great train! By the way, is it just me, or does the R153 exterior view look weird when the train is turning?
Thanks! And yeah, I don't know how to fix the turning radius. Any help with that would be appreciated.
@Cj & 4express, thanks! But it was trevor logan's R142 that inspired me to even get started with the project. I wish it were never taken down because so many people were unable to use a R142 for the 2 line.
-
Something Error had told me about long ago basically translateall has like half the size of the train example the Siemens is 18.5 and half of it is 9.25 so its [translateall 0, 0, 9.25]
-
Something Error had told me about long ago basically translateall has like half the size of the train example the Siemens is 18.5 and half of it is 9.25 so its [translateall 0, 0, 9.25]
I believe Translate all centers the train so when it turns it turns like a whole train and not individually by car, and it also makes the exterior be aligned with the cab position.
-
Concept doesn't work on animated objects. I just tried it and it affects the coding (animated object won't show), so if anyone knows how to fix this, then it would be greatly appreciated it.
Great job SIR! I forgot to compliment you earlier!
-
Concept doesn't work on animated objects. I just tried it and it affects the coding (animated object won't show), so if anyone knows how to fix this, then it would be greatly appreciated it.
Great job SIR! I forgot to compliment you earlier!
It does work... Look at the R38
-
Noone has provided the actual meaning to the TranslateAll command yet, so let me explain. It's quite simple, really.
Look at the word Translate. It's a math term that also means "to slide" or "to move".
So, the TranslateAll command simply moves the entire object (hence the All after the word Translate). Why are there three values after it? Because the object will be moving according to the x-,y-,z-coordinate values that you assigned to the command.
Looking at the command, I can see that the train object that is referred to is built negatively. In [TranslateAll 0, 0, 9.25], only the z-value is defined and positive. That means the object is simply being moved (in the z-axis) so the center of the train object is sitting at the origin (0,0,0).
-
Something Error had told me about long ago basically translateall has like half the size of the train example the Siemens is 18.5 and half of it is 9.25 so its [translateall 0, 0, 9.25]
i actually tried this on all of the trains i have ( for my personal use of course) and it actually worked, thanks
&
@ (SIR) Outstanding R142 + if possible what will your next train project be?
Sorry i had forgotten to leave feedback lol
-
Something Error had told me about long ago basically translateall has like half the size of the train example the Siemens is 18.5 and half of it is 9.25 so its [translateall 0, 0, 9.25]
i actually tried this on all of the trains i have ( for my personal use of course) and it actually worked, thanks
&
@ (SIR) Outstanding R142 + if possible what will your next train project be?
Sorry i had forgotten to leave feedback lol
Siemens?
-
Something Error had told me about long ago basically translateall has like half the size of the train example the Siemens is 18.5 and half of it is 9.25 so its [translateall 0, 0, 9.25]
i actually tried this on all of the trains i have ( for my personal use of course) and it actually worked, thanks
&
@ (SIR) Outstanding R142 + if possible what will your next train project be?
Sorry i had forgotten to leave feedback lol
Siemens?
Both alstom and siemens. and it worked too
-
Something Error had told me about long ago basically translateall has like half the size of the train example the Siemens is 18.5 and half of it is 9.25 so its [translateall 0, 0, 9.25]
i actually tried this on all of the trains i have ( for my personal use of course) and it actually worked, thanks
&
@ (SIR) Outstanding R142 + if possible what will your next train project be?
Sorry i had forgotten to leave feedback lol
Siemens?
Both alstom and siemens. and it worked too
error46146 R160A Alstom is fine the way it is...
-
Something Error had told me about long ago basically translateall has like half the size of the train example the Siemens is 18.5 and half of it is 9.25 so its [translateall 0, 0, 9.25]
i actually tried this on all of the trains i have ( for my personal use of course) and it actually worked, thanks
&
@ (SIR) Outstanding R142 + if possible what will your next train project be?
Sorry i had forgotten to leave feedback lol
Siemens?
Both alstom and siemens. and it worked too
error46146 R160A Alstom is fine the way it is...
The Alstom Propulsion is excellent, the siemens need working on
-
The Siemens needs a lot of work done, The Alstom needs minor tweakage to it though. If you compare a real alstom to Errors alstom you will see what I mean
-
The Siemens needs a lot of work done, The Alstom needs minor tweakage to it though. If you compare a real alstom to Errors alstom you will see what I mean
to error's credit he did a great job, it's actually pretty hard to get the NTT's propulsions down to a T... His is like a lower case t lol
-
Version 5 will be released this weekend and it's going to be both the R142 & R142A together in one package. 8)
-
yeah....cant wait 8)
-
will it have a new panel or exterior
-
Please refer to this topic: http://forums.bvestation.com/index.php?topic=252.0 (http://forums.bvestation.com/index.php?topic=252.0)
BStyles
-
Version 5 will be released this weekend and it's going to be both the R142 & R142A together in one package. 8)
with all due respect, can you get on with the BVE versions already?
-
It's only for OpenBVE.
-
I know, thats why i said can you do BVE versions too! ;D
-
Only openBVE has support for exteriors.
-
Updated to version 5!
-
so its ready for release??
-
No, no, no. @SIR i meant can you do a BVE version of your R142A? I have your old sounds but they sound challenged.
-
No, no, no. @SIR i meant can you do a BVE version of your R142A? I have your old sounds but they sound challenged.
I think I already said this a couple of times but I'm not developing anymore for BVE 2/4, only OpenBVE. What exactly is stopping you from installing OpenBVE?
-
so its ready for release??
Click the link in the first post...
-
What I believe Haven172 is getting at is the fact that a lot of these trains in development for OpenBVE were also stated to have a BVE 2/4 version coming soon and yet none have actually materialized. Now SIR has stated that he will only develop for OpenBVE and that is fine, but for those who make these annoucements of BVE 2/4 versions, you shouldn't say there will be a BVE 2/4 version if you have no intention of doing so. (R142A is a prime example. It's listed as having a BVE 2 version coming, but no info about it in the last couple of months) Now let's just take this into account: There are many of you who are unable to run BVE 2/4 and then there are those who can. Is it fair for them to be left out?? No. Many of the developers here create routes for both BVE 2/4 and OpenBVE so that everyone may enjoy the great work found here on BVEStation, yet trainsets are not the same way. It is the developer's choice which platform to develop for and I respect that. For me, I do not develop for OpenBVE because for some reason, I have problems with shading and colors popping up where they shouldn't be and a lot of objects intersecting with each other where as the same objects do not in BVE 2/4. For example, the tunnel rails I use do not have the color yellow or white in them. Yet at random times, certain parts of the object will display that way and I don't know why. My point is is that people are frustrated.
-
I understand what you're saying but I don't have either BVE 2 or 4 installed my computer anymore. BVE isn't optimized the way I like it to be whereas OpenBVE loads quickly and runs faster as well. Also, do keep in mind that BVE 2 was released in 2001 and BVE 4 was released in 2004, and it's harder to develop for those two than it is for OpenBVE.
As for the BVE 2 version of the R142A, that was being developed by someone else I believe.
-
Oh believe me, I understand exactly what you are saying. I reach a steady 60 fps on my A route which is heavily textured using OpenBVE whereas I'm getting between 12-30 fps on BVE 4. So I know what you mean. I was just saying that there are still BVE 2/4 users out there and I just feel like we are leaving them out of the loop.
-
BVE 2/4 and OpenBVE can both be installed on a computer at the same time without any problems so it's really up to those "out of the loop" to get in. I'm sure you remember how the R142A sounded when it was BVE, it wasn't nearly anything like the real-life one but with OpenBVE it's easier to obtain that realism with the allowance of extra motor sounds.
-
BVE 2/4 and OpenBVE can both be installed on a computer at the same time without any problems so it's really up to those "out of the loop" to get in. I'm sure you remember how the R142A sounded when it was BVE, it wasn't nearly anything like the real-life one but with OpenBVE it's easier to obtain that realism with the allowance of extra motor sounds.
if it wasn't for windows 7 or vista not using DLLs then all of us would've been still using bve 2 or 4
-
if it wasn't for windows 7 or vista not using DLLs then all of us would've been still using bve 2 or 4
That is true, and that is one of the primary reasons why openBVE was initiated so people with Windows Xp computers as well as Linux and Mac users would not feel out of the loop. Keep in mind that before openBVE, Mac and Linux users would have to run windows through a program paralleled with Mac, so they can enjoy the content that BVE users enjoy.
Personally, even if I could use BVE 2/4 I wouldn't because of the frame optimization and the high frame rates, but I definitely understand your point.
-
No, no, no. @SIR i meant can you do a BVE version of your R142A? I have your old sounds but they sound challenged.
I think I already said this a couple of times but I'm not developing anymore for BVE 2/4, only OpenBVE. What exactly is stopping you from installing OpenBVE?
It is really really really laggy. Some of the routes for BVE 2 i use, Q, F (JayJays), and the 7 extensions i cant use. Its my computer that is stopping me. Hell id use Open anytime, but im limited to my powers.
What I believe Haven172 is getting at is the fact that a lot of these trains in development for OpenBVE were also stated to have a BVE 2/4 version coming soon and yet none have actually materialized. Now SIR has stated that he will only develop for OpenBVE and that is fine, but for those who make these annoucements of BVE 2/4 versions, you shouldn't say there will be a BVE 2/4 version if you have no intention of doing so. (R142A is a prime example. It's listed as having a BVE 2 version coming, but no info about it in the last couple of months) Now let's just take this into account: There are many of you who are unable to run BVE 2/4 and then there are those who can. Is it fair for them to be left out?? No. Many of the developers here create routes for both BVE 2/4 and OpenBVE so that everyone may enjoy the great work found here on BVEStation, yet trainsets are not the same way. It is the developer's choice which platform to develop for and I respect that. For me, I do not develop for OpenBVE because for some reason, I have problems with shading and colors popping up where they shouldn't be and a lot of objects intersecting with each other where as the same objects do not in BVE 2/4. For example, the tunnel rails I use do not have the color yellow or white in them. Yet at random times, certain parts of the object will display that way and I don't know why. My point is is that people are frustrated.
Yes exactly
BVE 2/4 and OpenBVE can both be installed on a computer at the same time without any problems so it's really up to those "out of the loop" to get in. I'm sure you remember how the R142A sounded when it was BVE, it wasn't nearly anything like the real-life one but with OpenBVE it's easier to obtain that realism with the allowance of extra motor sounds.
it sounded fine. the only thing is, it sounded challenged when it started up.
-
What I believe Haven172 is getting at is the fact that a lot of these trains in development for OpenBVE were also stated to have a BVE 2/4 version coming soon and yet none have actually materialized. Now SIR has stated that he will only develop for OpenBVE and that is fine, but for those who make these annoucements of BVE 2/4 versions, you shouldn't say there will be a BVE 2/4 version if you have no intention of doing so. (R142A is a prime example. It's listed as having a BVE 2 version coming, but no info about it in the last couple of months) Now let's just take this into account: There are many of you who are unable to run BVE 2/4 and then there are those who can. Is it fair for them to be left out?? No. Many of the developers here create routes for both BVE 2/4 and OpenBVE so that everyone may enjoy the great work found here on BVEStation, yet trainsets are not the same way. It is the developer's choice which platform to develop for and I respect that. For me, I do not develop for OpenBVE because for some reason, I have problems with shading and colors popping up where they shouldn't be and a lot of objects intersecting with each other where as the same objects do not in BVE 2/4. For example, the tunnel rails I use do not have the color yellow or white in them. Yet at random times, certain parts of the object will display that way and I don't know why. My point is is that people are frustrated.
I was the one that announced I'd be converting it. I have a lot of projects on the back burner right now so it's not coming along as fast as the other trains I've converted before. OpenBVE's sound standards are atrocious compared to BVE 2 and 4 so it's a lot easier to plop recordings in and release trains. When I convert them I have to sift through the .dat file and fix the run sounds. A version was ready for release, but the run sounds were deemed not usable by other testers. I have enough recordings to finish it now but I would like to get out the R110A and then hopefully convert them both to BVE 4 since I boot with Multiple OS's.
And the framerate issue on macs is BS, I ran the A on BVE 2 using Parallells 4 years ago and I got a decent 60 fps. People can also use Boot Camp to dual boot systems. Linux users also have WINE and DarWINE, which is a crapload more easier to install than using Mono to open OpenBVE. If they have a mac and want to use a free trainsim, then why not shell out the 30 bucks for parallells or VM Fusion.
-
What I believe Haven172 is getting at is the fact that a lot of these trains in development for OpenBVE were also stated to have a BVE 2/4 version coming soon and yet none have actually materialized. Now SIR has stated that he will only develop for OpenBVE and that is fine, but for those who make these annoucements of BVE 2/4 versions, you shouldn't say there will be a BVE 2/4 version if you have no intention of doing so. (R142A is a prime example. It's listed as having a BVE 2 version coming, but no info about it in the last couple of months) Now let's just take this into account: There are many of you who are unable to run BVE 2/4 and then there are those who can. Is it fair for them to be left out?? No. Many of the developers here create routes for both BVE 2/4 and OpenBVE so that everyone may enjoy the great work found here on BVEStation, yet trainsets are not the same way. It is the developer's choice which platform to develop for and I respect that. For me, I do not develop for OpenBVE because for some reason, I have problems with shading and colors popping up where they shouldn't be and a lot of objects intersecting with each other where as the same objects do not in BVE 2/4. For example, the tunnel rails I use do not have the color yellow or white in them. Yet at random times, certain parts of the object will display that way and I don't know why. My point is is that people are frustrated.
I was the one that announced I'd be converting it. I have a lot of projects on the back burner right now so it's not coming along as fast as the other trains I've converted before. OpenBVE's sound standards are atrocious compared to BVE 2 and 4 so it's a lot easier to plop recordings in and release trains. When I convert them I have to sift through the .dat file and fix the run sounds. A version was ready for release, but the run sounds were deemed not usable by other testers. I have enough recordings to finish it now but I would like to get out the R110A and then hopefully convert them both to BVE 4 since I boot with Multiple OS's.
And the framerate issue on macs is BS, I ran the A on BVE 2 using Parallells 4 years ago and I got a decent 60 fps. People can also use Boot Camp to dual boot systems. Linux users also have WINE and DarWINE, which is a crapload more easier to install than using Mono to open OpenBVE. If they have a mac and want to use a free trainsim, then why not shell out the 30 bucks for parallells or VM Fusion.
i get about 50 or more running any route besides the F, Q, and 7 Ext.
-
...which is a crapload more easier to install than using Mono to open OpenBVE.
How the hell is Mono difficult? Open a Terminal window, type mono, drag the openBVE .exe into the window, and bam, you're off!
-
...which is a crapload more easier to install than using Mono to open OpenBVE.
How the hell is Mono difficult? Open a Terminal window, type mono, drag the openBVE .exe into the window, and bam, you're off!
Not only do you have to compile the files to load in it, but you have to do that on a normal basis to open the program. My point is that it's easier to use the other more conventional alternatives if you're knowledgeable enough to do that
-
I get what your all saying. My problem with openBVE right now is the shading and clipping issues as well as colors popping up where they don't belong. Also, openBVE does not display the colors as vibrant as BVE 2/4 does. I will post screens later so you can all see what I mean. I would develop for openBVE if I or someone can figure out this issues I've been having. :(
-
Maybe it's all to do with the graphics. What are your specs?
-
I get what your all saying. My problem with openBVE right now is the shading and clipping issues as well as colors popping up where they don't belong. Also, openBVE does not display the colors as vibrant as BVE 2/4 does. I will post screens later so you can all see what I mean. I would develop for openBVE if I or someone can figure out this issues I've been having. :(
some people say that OpenBVE is too precise, but what me and a few other developers have found is that some of the technologies it uses is actually imperfect. Error actually found a flaw in the sound renderer while developing the R46, and when I was converting over the R62A I ran into some problems as well
-
some people say that OpenBVE is too precise, but what me and a few other developers have found is that some of the technologies it uses is actually imperfect. Error actually found a flaw in the sound renderer while developing the R46, and when I was converting over the R62A I ran into some problems as well
Did you and Error mention this problem on the openBVE forums to see if michelle can do anything about it?
-
some people say that OpenBVE is too precise, but what me and a few other developers have found is that some of the technologies it uses is actually imperfect. Error actually found a flaw in the sound renderer while developing the R46, and when I was converting over the R62A I ran into some problems as well
Did you and Error mention this problem on the openBVE forums to see if michelle can do anything about it?
Error mentioned his problem and I worked around mines since I couldn't get a solution at the time. Michelle acknowledged his problem as a flaw being in the sound renderer itself and gave him a quick fix
-
ATI Mobility Radeon HD 5730
1GB DDR3 SDRAM
Core i7 720Q Quad-Core 1.6 ghz
-
ATI Mobility Radeon HD 5730
1GB DDR3 SDRAM
Core i7 720Q Quad-Core 1.6 ghz
Wait, you have a core i7 and only one gig of RAM? lol you should at least get like another gb
-
The 1gig or RAM is my graphics memory. I have 4gigs of DDR3 RAM for my system. But on to the R142A. To give feedback I have to admit it is a nice train. SIR did a fantastic job. However, I must point out that the deceleration sound is nothing like the R142A until it gets down to about 15mph. The constant acceleration sound you hear on the R142A as it's moving along is the same sound you hear when it is decelerating. Otherwise this is a good train.
-
However, I must point out that the deceleration sound is nothing like the R142A until it gets down to about 15mph. The constant acceleration sound you hear on the R142A as it's moving along is the same sound you hear when it is decelerating.
Its been stated before that its hard to get a NTTs train sound down to the t.
-
I get what your all saying. My problem with openBVE right now is the shading and clipping issues as well as colors popping up where they don't belong. Also, openBVE does not display the colors as vibrant as BVE 2/4 does. I will post screens later so you can all see what I mean. I would develop for openBVE if I or someone can figure out this issues I've been having. :(
I know what you mean. I have those issues with the latest development version, however not with the latest regular release.
-
Ok here's the thing. I don't understand why people get upset when feedback is given that may not be favorable. That's how things get better. And I know that it's been stated that the NTT's are hard to code, however like SIR said, the original R142A had perfect sound on both the acceleration and the deceleration, but the startup was a bit off. So it is possible to get it to a tee. And I'm sorry, constructive criticism is how you better a product. So I have no idea why some of you have problems when others point out negatives, yet those same people point out the negatives of other peoples work.
Joseto that's funny. I'm the opposite. I have that prob with the regular release.
-
Ok here's the thing. I don't understand why people get upset when feedback is given that may not be favorable. That's how things get better.
Agreed. Why else would there be development threads, to feed egos? lol
-
SIR what happen r142 5.0 for last weekend
-
check out the link from the first post.
-
Later this week, version 6 will be released with refined propulsion sounds as well as BVE 2/4 versions. 8)
-
I LOVE YOU!!!!!!!!!!! SO MUCH!!!!!!!! THANK YOU!!!!!!!
:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D
-
It's no problem, converting the train to BVE 2/4 is only a matter of speeding up the sounds and changing the .dat file. The R142 now makes propulsion sounds quicker, and the R142A has a deeper pitch, matching acceleration/deceleration sounds & no more repeating sounds. I'll be releasing version 6 later today while the BVE 2/4 versions will be released this weekend.
Does anyone have a file of the R142 making that hissing noise when it speeds and slows down?
-
Can't wait!!! I hope you didn't take what I said as dissing your work. I just wanted to point it out. The 142A is my favorite train and I've been dying for a BVE version (any BVE version) for like ever!!!
-
Agreed.
BVE 2 is literally my life
-
Version 6.0 released for OpenBVE. BVE 2/4 coming shortly!
-
The R142A sounds beautiful SIR! Bravo and the P1/P2 sounds have been completely fixed!
Just a few things to point out:
Sound Wise:
- The deceleration type sound that is present in the acceleration sound right when the train starts moving has been missing since V2.
- Particular deceleration sounds should have a higher volume, especially on those note drops.
Exterior Wise:
- The rotation on its axis problem has still not been fixed.
Other than that, I can say this is the best release yet and once you fix up those sound discrepancies, then this will be a perfect train.
-
The R142A sounds beautiful SIR! Bravo and the P1/P2 sounds have been completely fixed!
Just a few things to point out:
Sound Wise:
- The deceleration type sound that is present in the acceleration sound right when the train starts moving has been missing since V2.
- Particular deceleration sounds should have a higher volume, especially on those note drops.
Exterior Wise:
- The rotation on its axis problem has still not been fixed.
Other than that, I can say this is the best release yet and once you fix up those sound discrepancies, then this will be a perfect train.
Thanks simon! That deceleration type sound is missing because I used using a different recording of a R142A that didn't make that noise. But I just increased the volume rate of motor0.wav and motor5.wav and it makes a huge difference. About the axis rotation, I was told to use something called Translateall and place that line into some of the files but that was never elaborated. Any help with that would be appreciated?
It seems that when the BVE 2/4 version is released, it'll probably be version 7!
-
I told you about the TranslateAll method I learned from Error I think and the R142A are prefect minus the deceleration and the R142s the 6971 edition the HVAC is too loud
-
I told you about the TranslateAll method I learned from Error I think and the R142A are prefect minus the deceleration and the R142s the 6971 edition the HVAC is too loud
What value do we put in the translateall function because I'm not sure if the 153 was modeled after a 51 fter.
-
I tried all the translateall method, and all the doors became misaligned.
-
I tried all the translateall method, and all the doors became misaligned.
Yep, the same happened to me. Half the train was invisible and I could see was the doors.
Also R142A v6.1 is released with louder deceleration sounds.
-
I tried all the translateall method, and all the doors became misaligned.
you have to add the translateall coding to ALL .b3d/.csv files involved in the train. In this case you didn't add it to the doors file
-
I tried all the translateall method, and all the doors became misaligned.
you have to add the translateall coding to ALL .b3d/.csv files involved in the train. In this case you didn't add it to the doors file
Could you host those files or give them to SIR? That way the rest of us can have a fully functional 142A.
-
I tried all the translateall method, and all the doors became misaligned.
you have to add the translateall coding to ALL .b3d/.csv files involved in the train. In this case you didn't add it to the doors file
Could you host those files or give them to SIR? That way the rest of us can have a fully functional 142A.
Sure, I'll do it later.
-
Here you go:
http://www.mediafire.com/?8c1lcc2lleln612 (http://www.mediafire.com/?8c1lcc2lleln612)
-
Thank you pacific385 x100, the trains look normal now lol!
Version 7.0 uploaded with a minor graphical fix & now tilting train cars!
My goal now is get the train interior from looking like this (http://i.imgur.com/zx9VN.png) to something like this (http://rpmedia.ask.com/ts?u=/wikipedia/commons/thumb/2/26/Empty_subway_in_NYC.jpg/250px-Empty_subway_in_NYC.jpg) for this for the R142A and the same for the R142. The seats and poles should be bigger because the R142s are cramped for space but there is plenty of space in the openbve version, the FIND is missing and there should be indents where the doors are on both exterior & exterior.
-
V7 came out which means the BVE version came out. right?
-
Thank you pacific385 x100, the trains look normal now lol!
Version 7.0 uploaded with a minor graphical fix & now tilting train cars!
My goal now is get the train interior from looking like this (http://i.imgur.com/zx9VN.png) to something like this (http://rpmedia.ask.com/ts?u=/wikipedia/commons/thumb/2/26/Empty_subway_in_NYC.jpg/250px-Empty_subway_in_NYC.jpg) for this for the R142A and the same for the R142. The seats and poles should be bigger because the R142s are cramped for space but there is plenty of space in the openbve version, the FIND is missing and there should be indents where the doors are on both exterior & exterior.
Then that would defeat the purpose of me making an Exterior/Interior.
BStyles
-
Then that would defeat the purpose of me making an Exterior/Interior.
BStyles
That's not it.
If you look back at recent posts:
Version 6.0 released for OpenBVE. BVE 2/4 coming shortly!
It seems that when the BVE 2/4 version is released, it'll probably be version 7!
So, according to this, Version 7 might have a BVE version.
-
Then that would defeat the purpose of me making an Exterior/Interior.
BStyles
That's not it.
If you look back at recent posts:
Version 6.0 released for OpenBVE. BVE 2/4 coming shortly!
It seems that when the BVE 2/4 version is released, it'll probably be version 7!
So, according to this, Version 7 might have a BVE version.
Well, look on the first page, V7 was the one where I added the "Translateall" code
-
I love SIR North Shore's R142 & R142A cuz been R142 & R142A on all of irt line
-
Thanks Allyn65! The front page has been updated with a new R143 for OpenBVE. I've been having more problems than I would like trying to convert the sounds to BVE 2/4, but I'll still get it released as soon as it is complete.
-
Nice work, I like the HVAC Sounds!
-
Very great work, the HVAC sound, i still have the old one from the original R160 lol.
-
Nice R143,but it would be nice if someone made an exterior for it ;)
-
hey (SIR) i actually have an R143 exterior i can donate from my cancelled R143 project. Its a modified version of jayjay85's R160 exterior that I got permission to modify.
-
Thanks everyone! DJ, I'll pm you my email!
-
@SIR I'm sorry that i bugged you so much about the BVE version of your trains. I have OpenBVE on my dad's computer, just not my mom's. They both have the same computer but Open on my dads computer is extremely smooth
-
are you gonna release the r142 with the hissing sound
-
Yeah, there's going to be a new 3 train R142 with the hissing sound and also a new R142A 2, 3 to New Lots and 5 train to 149th St with new sounds.
Also how do you all like the trains? My favorite is the R142A 6 because I tried to make it sound exactly the R142As and I use to ride them to school everyday.
-
It's really good. Highly realistic in terms of physics and sounds. I hope you plan on developing more trains in the future!
-
What do you guys mean by hissing sound b\c I hear that alot and also howling when braking from high speeds around 30mph+ they scream until about 17mph.And they start to scream/howl around 30mph and up.
-
So, version 8 is looking to be the final version for the trains until further notice (hopefully there will be a 3D cab or new exterior developed in the future!) I refined the physics, speed, and sounds to be as realistic as possible. The R142A will be released first and trust me, you'll definitely enjoy it! 8)
-
Alright! Can't wait to try it out.
-
So, version 8 is looking to be the final version for the trains until further notice (hopefully there will be a 3D cab or new exterior developed in the future!) I refined the physics, speed, and sounds to be as realistic as possible. The R142A will be released first and trust me, you'll definitely enjoy it! 8)
As mentioned before BStyles is in the process on making a 3D cab on his R142
-
As mentioned before BStyles is in the process on making a 3D cab on his R142
As mentioned before BStyles's R142A and R142 is a separate project.
-
Once again, I am making BOTH the 142 and 142A, in collaboration with error46146 ans SIR. I am making the R142, and it will feature a 3D cab, as Slants4lyfe just said, and after which the R142A will be completed. It's also in the topic title, just a mere scroll downwards from this one.
BStyles
-
Yep, when Bstyles is finished with his part, then we will all collaborate our projects because error46146 has a R142A as well.
Quick question though, I'm about to release the R142 v8 and a new R142A (4) train in the next hour but I need numbers for a R142A (4) trainset. First person to respond gets those numbers put on the train!
-
How about 7781-90?
-
How about 7781-90?
He right you can use any train set from 7661-7810
-
How about 7781-90?
He right you can use any train set from 7671-7810
Fixed.My favorite 5 car set is 7695-91.
-
How about 7781-90?
He right you can use any train set from 7671-7810
Fixed.My favorite 5 car set is 7695-91.
No I was right go look on the nycsubway.org the (4) train owns 7661-7670 everything before 7661 is a 6 train
-
How about 7781-90?
He right you can use any train set from 7671-7810
Fixed.My favorite 5 car set is 7695-91.
No I was right go look on the nycsubway.org the (4) train owns 7661-7670 everything before 7661 is a 6 train
Really since when did that set make it to the (4)?
-
How about 7781-90?
He right you can use any train set from 7671-7810
Fixed.My favorite 5 car set is 7695-91.
No I was right go look on the nycsubway.org the (4) train owns 7661-7670 everything before 7661 is a 6 train
Really since when did that set make it to the (4)?
7661 has been on the (4) for awhile now...
-
How about 7781-90?
He right you can use any train set from 7671-7810
Fixed.My favorite 5 car set is 7695-91.
No I was right go look on the nycsubway.org the (4) train owns 7661-7670 everything before 7661 is a 6 train
Really since when did that set make it to the (4)?
7661 has been on the (4) for awhile now...
Damn never seen it.Unless its OOS in 207th Shop or Yonkers.But I have noticed sets missing which is obvious.
-
(sir) can you make an R142/R142A 3 train?
-
Yeah, I've been very busy lately but I will get around to making extra trainsets. I will be uploading that new (4) trainset very shortly though.
-
Is it possible to make a Swatch train?
-
Is it possible to make a Swatch train?
Photoshop the exterior and there you go.
-
It's possible, but wouldn't that be free advertising for Swatch lol? Also, the new (4) trainset 7781 has been uploaded. I'll be adding more over time.
-
where can find the r142a you uploaded
-
where can find the r142a you uploaded
1st page of the thread has the R-142 files and R-142A files.Inside the folders are a few trainsets with different numbers such as 63xx for the (2) line 67xx for the (5) 72xx for the (6) and 77xx for the (4).
-
Yep, all the downloads can be located on the first page. R142A 7765 is ready for download and signed as the 2 line. It would be nice if there were some more IRT routes! 8)
Also, version 9 is very slowly in the making because I'm also working on another project at the moment but v9 will only be visual tweaks (all 10 cars will be numbered correctly). I tried messing around with a "hissing version" of the R142 but I couldn't get it to sound the way I wanted it to so you'll have to wait until Bstyles releases his R142.
-
A new 5 Train R142A is now available for download along with JayJay85's new R179 OpenBVE train! 8)
The R179 is only a beta at the moment but new versions will be released over time. So look out next month for the R142 version 9 update and also a new animated R143 (L) & (M) trains complete with a new photo-realistic panel.
-
R179 is nicely made! Hope to see the final version come out!
-
Great job!!!
-
The R179 is very nice! However, the exterior, along with the 160 exterior's height is too low and it doesn't match the platform. Could you fix that
-
I don't want too sound like a pest but do you mind like instead of the default R-142's HVAC's being on all times can it like go in and out like compressors? Like it kicks in every minute or 2 then cut outs.
-
Sure, I'll make a new R142 where the HVAC acts like the compressor. Do you want this train as a 2, 4, 5 or 6?
Thanks everyone! And the R179 is still a beta, so any suggestions or ideas will definitely be taken into consideration.
-
Sure, I'll make a new R142 where the HVAC acts like the compressor. Do you want this train as a 2, 4, 5 or 6?
Thanks everyone! And the R179 is still a beta, so any suggestions or ideas will definitely be taken into consideration.
sorry i find the link,
-
Sure, I'll make a new R142 where the HVAC acts like the compressor. Do you want this train as a 2, 4, 5 or 6?
Doesn't matter any R-142 plz.
-
Sure, I'll make a new R142 where the HVAC acts like the compressor. Do you want this train as a 2, 4, 5 or 6?
Thanks everyone! And the R179 is still a beta, so any suggestions or ideas will definitely be taken into consideration.
sorry i find the link,
Cool, it's right on the front page!
And I'll have that R142 ready in a few hours.
-
For any other train developers; some what of a nit picky thing, but the end cars for example, some of the trains have the headlights picture instead of the traditional tail lights. Now the static trains the route developers have in the routes, has the tail lights. I don't know how to exactly word it, but I hope you know what I mean.
-
Those R-179's are tough! The fastest one is R-179 2931 set did some speed testing on the (R) shuttle btwn 95 and 86th and I hit 40+ making a complete stop with the other 2 sets barely reaching 37.Great job!
-
It's cool to see more trains with animated doors and signs. But the problem with the R179 is about the doors. In the interior the doors are visible
(http://i1208.photobucket.com/albums/cc367/TheA-R44/r179.jpg)
You might want to fix that in the next beta release. and you also misspelled broadway in broadway junction wrong/
And also in the exterior the doors are a bit uneven a little bit of one of the doors are blocked and one isnt
(http://i1208.photobucket.com/albums/cc367/TheA-R44/r1792.jpg)
-
The interior signs can be easily fixed manually IF you ask permission first
-
i know, i just dont want to mess anything up on this train. in the next beta release he might fix it up
-
Williamster17
don't worry about it by version 3 the interior for R179/R160 will be so perfect it will be like the real thing
-
That's great news JayJay. By the way, there is a height problem with the interior and exterior. The car body is a bit too long compared to undercar because the doors don't align up with the platform. Hope that gets fixed for the next verson! :)
-
not to be picky but i wonder if everyone is getting the animated codings from me but if you are please ask first.
-
not to be picky but i wonder if everyone is getting the animated codings from me but if you are please ask first.
No, For The R142 - the R152 was used and for the others, Jayjay did it
-
SIR North Shore i was wondering if i can make an add-on for your r142 to make it animated signs
-
not to be picky but i wonder if everyone is getting the animated codings from me but if you are please ask first.
I'm getting all my animated signs from error's packages.
-
I know you guys have a lot of work cut out for you and I do not mean to sound like a pest but do you guys think you guys could make an R142 not R142A 6 train since that was something that happen recently
-
A couple of new releases are going to be uploaded very soon.
And also, the animated trains are cool just make sure not edit anything else about the train without letting me know because when I update the trains in the future, I want them all to be at the same version.
-
New R142A <6> with animated signs and JayJay's R179 Version 2 released! 8)
-
Guys is it normal For The (5) And (2) Trains to Have Only a open door on the end os thier cars.
I mean that The Trainsets For The (2) And (5) trains.At the Last Subway Car The last 2 doors dont open.
-
If someone could get the door problem fixed, that would be cool. The train progressed so quickly and far by the help of others as well. If anyone else has different sign versions send me a link and I'll add it to the front page.
-
Actally i kinda like the end of the 2 doors not opening.Like when you reach the last stop 1 door only opens on each car.Its kinda fun.
-
OpenBVE R143 Version 7.5 Released.. I saw someone out there on youtube with an animated R143 L train. If you or anyone else have an animated exterior for the R143, send me an email. I need one for version 8!
-
Guys is it normal For The (5) And (2) Trains to Have Only a open door on the end os thier cars.
I mean that The Trainsets For The (2) And (5) trains.At the Last Subway Car The last 2 doors dont open.
Trains at EVERY single terminal do that. It's normal
-
i meant on openbve
-
Yes in that case
-
So here's the release status on a few of my projects:
New R32/R38 sounds - July
Siemens R160 - July/August
Updated <6> Exp - Next Week
-
So here's the release status on a few of my projects:
New R32/R38 sounds - July
R142 w/ compressor - Later Today
R179 Version 3 - Later Today
R143 Version 7.6 - Later Today
Cool can't wait for that 142!
-
A few new releases for June 8) Everything can be downloaded on the front page (http://forums.bvestation.com/index.php?topic=336.0) of this thread.
R142 w/ No HVAC.
R143 with a new animated exterior/interior, thanks to DJ Hammers & JayJay85.
R179 Version 3.0 by JayJay85.
Have fun driving! ;) Now that the sounds are out of the way, I will start working with JayJay on the R179 to get it up to version 8 as well.
-
So here's the release status on a few of my projects:
New R32/R38 sounds - July
Siemens R160 - July/August
Updated <6> Exp - Next Week
good luck on the siemens
-
So here's the release status on a few of my projects:
New R32/R38 sounds - July
Siemens R160 - July/August
Updated <6> Exp - Next Week
Do you mean the route for the <6> train?
-
No, he means the signs for the route, for the train.
BStyles
-
OpenBVE R179 Version 4 has been released! 8)
Download here. (http://forums.bvestation.com/index.php?topic=336.0)
Thanks Pacific, hopefully it won't take too long. And Bstyles is correct, only the train is being updated.
-
Brand new Animated R179 (F) Train for download!
-
where?
-
where?
First page?
-
Now that the R179 (F) is finished, which route would you like to see the R179 on next?
-
The D or A train
-
Just uploaded the R179 D, M and R trains. Downloads are on the first page of this thread!
-
I just want to know, why do the updated R143 and 179 sounds have so much static and just doesn't sound to good? The first version of the R179 and 143 sounds were perfect.
-
I just want to know, why do the updated R143 and 179 sounds have so much static and just doesn't sound to good? The first version of the R179 and 143 sounds were perfect.
TJay is correct the old R143 sounds were better now the R143 sounds more like a R179 with R142 sounds..............
-
I made the sounds louder but I'll change that as soon as I get a chance.
-
Instead of releasing the entire train folder can you like take out some stuff that was not updated such as the "cars" for the exterior/interior.
-
I wish I could do that but each train calls for different textures so an entire copy of the train folder is required. I need a script system like DJ Hammer's R38 in order to have only 1 train.
Download R179 V5 & R143 V8.1 here (http://forums.bvestation.com/index.php?topic=336.0)
-
is there going to be an R143 M train
-
the R143 sounds a lot better now, Like the animation.
-
152 MB... thats a real doozy lol.. I think that we really have to start finding a way to reduce the size of these files. Slow internet users won't be able to get new content if files remain this large all the time.
-
I agree. If this was just a sounds update, couldn't you just upload the new sounds and tell everyone to override the old files instead of having everyone download every single file again. Even with high speed broadband, this download will take me at least 20 minutes to fully download.
-
I agree. If this was just a sounds update, couldn't you just upload the new sounds and tell everyone to override the old files instead of having everyone download every single file again. Even with high speed broadband, this download will take me at least 20 minutes to fully download.
If it takes you 20 minutes with high speed broadband, there is something wrong with your connection then.
I don't use FiOS or Cable, I have Verizon's High Speed Broadband and that 152MB download took less then 10 minutes for me.
Besides that fact, I also do believe if it were small upgrades, it would be better to upload the fixes instead. Unless of course it was an overhaul of the complete folder.
-
If it takes you 20 minutes with high speed broadband, there is something wrong with your connection then.
I'm sure he was being sarcastic about that time but I get internet off the air downloading about 150kpb/s and a 50MB file takes about 5min.But I know where he's coming from.
But updating the entire folder is un necessary.I have about 3 versions of the R-179 so thats 9 files I have v1 v2.0 and v3.
-
You don't have to download it if you don't want to. When I was releasing just the updated files people were complaining even more about why I wasn't including the entire train with it. ???
Also, the days of holding back on content because someone has a slow internet connection or ancient graphics card are over! It's about time that we push OpenBVE to it's limits even if it means a 152 MB download. Any other sim such as Trainz or Railworks has individual locomotives that are 300+ MB by themselves. And also read the readme, as it states to delete older versions of the R179 (V1-V4).
-
I would suggest converting all textures to PNG in order to save space anyway. Smaller file sizes also mean faster loading times in OpenBVE.
-
I would suggest converting all textures to PNG in order to save space anyway. Smaller file sizes also mean faster loading times in OpenBVE.
Good idea, I'll have that done for version 6.
-
Introducing the R179 Version 6!
Updates Include:
-New File structure so that a full re-download is not required after V6. Instead, when an update is released an incremental update file will be available as well as the full train.
-New textures.
-New R179s signed up for Jamaica Center (E) or (Z) and WTC-bound (E).
-If you have any new signs for the R179 send me a PM and I'll add it to the download pack.
Download on first page (http://forums.bvestation.com/index.php?topic=336.0)
REMEMBER: Please remove older versions of R179 first before installing version 6! This will be the last time this is required.
-
Great stuff!
Just wondering, when would you start incorporating the tail-lights for the trains. Not to be nit-picking but seeing headlights as the tails never seems right.
-
You don't have to download it if you don't want to. When I was releasing just the updated files people were complaining even more about why I wasn't including the entire train with it. ???
Also, the days of holding back on content because someone has a slow internet connection or ancient graphics card are over! It's about time that we push OpenBVE to it's limits even if it means a 152 MB download. Any other sim such as Trainz or Railworks has individual locomotives that are 300+ MB by themselves. And also read the readme, as it states to delete older versions of the R179 (V1-V4).
I really didn't mean to come off as ungrateful or anything with my last post, nor do I want you or anyone else to downgrade your work to meet the demands of outdated computers. I just meant the primary trains (the regular R179, the 8-car version and the one with Alstom propulsion) could've been packaged as one download and the extras as another. That's all. I appreciate all the work you and the other developers here are doing for the BVE community and am especially grateful that you make these trains as we wouldn't have a good R142 for this site for starters.
-
Any other sim such as Trainz or Railworks has individual locomotives that are 300+ MB by themselves.
This is an exaggeration, as most trains don't exceed 20-30MB. But I see the Idea you're getting at.
Great stuff!
Just wondering, when would you start incorporating the tail-lights for the trains. Not to be nit-picking but seeing headlights as the tails never seems right.
The 142 Exterior, as well as all the animations, sounds, etc. will be worked on by me, in due time. I'm currently working on the interior and i'm studying the code from most LUL trains.
SIR is right, though. We can't continue to make content easy to run for those who have low-end computers. This is 2011, and as much as i'm aware that cash is tight right now, you really have to take into consideration that time is moving on.
BStyles
-
@Bstyles ;; I wasn't asking about the 142 exterior. But in theory, yes. The R142 using the R152 (I believe) exterior has tail-lights instead of showing headlights. Concerning the R143/R160 train-set exteriors we got, it looks as if we are using the front car's face as the rear car's face as well. Hence showing headlights both front and back.
-
Great stuff!
Just wondering, when would you start incorporating the tail-lights for the trains. Not to be nit-picking but seeing headlights as the tails never seems right.
Thanks! The rear headlights are just a placeholder, as soon as I get the texture files for the rear and in between the cars, hopefully it'll look much better.
I really didn't mean to come off as ungrateful or anything with my last post, nor do I want you or anyone else to downgrade your work to meet the demands of outdated computers. I just meant the primary trains (the regular R179, the 8-car version and the one with Alstom propulsion) could've been packaged as one download and the extras as another. That's all. I appreciate all the work you and the other developers here are doing for the BVE community and am especially grateful that you make these trains as we wouldn't have a good R142 for this site for starters.
It's cool, don't worry about it. Hopefully the R179 will get a script of some kind to change the exterior/interior LED and FIND screens in the near future. Thanks for the support btw!
This is an exaggeration, as most trains don't exceed 20-30MB. But I see the Idea you're getting at.
Cool! 8)
@Bstyles ;; I wasn't asking about the 142 exterior. But in theory, yes. The R142 using the R152 (I believe) exterior has tail-lights instead of showing headlights. Concerning the R143/R160 train-set exteriors we got, it looks as if we are using the front car's face as the rear car's face as well. Hence showing headlights both front and back.
Exactly, there is no matching rear car face for the openbve R143/R160/R179 at the moment. Trying to place the tailights onto the R142 took me a few days to figure out but it wasn't an easy task at all lol. I'll take a shot at that soon for the R143 & R179.
-
That's great, I mean after so many versions I thought you guys would have picked up on this! None the less you guys did a great job!
If anyone was wondering what I was requesting them to fix was basically the tail-end from instead of having headlights, taillights; As shown here, I know it's not perfect but I never meant it to be perfect, more of an example. So apologies if I violated anything.
(http://img192.imageshack.us/img192/8125/picxd.png)
-
That looks very nice! check your PM
-
R179 6.1 update released on first page!
-
great trains.nice job
-
Thanks metzfan!
Here's a preview of the R179B-2 in version 7:
(http://i.imgur.com/WSntZ.png)
(http://i.imgur.com/0e3MV.png)
(http://i.imgur.com/rXnro.png)
R179A-1 v7:
(http://i.imgur.com/6znnu.png)
(http://i.imgur.com/ylBS6.png)
(http://i.imgur.com/KEjPO.png)
(http://i.imgur.com/UkCTX.png)
-
That looks great! I'm not sure how you can improve on your R-142A and R-179A with these sounds:
NYC Subway audio recording: R-142A 7339 (6) train. (http://www.youtube.com/watch?v=dcY1PJB9ve8#)
NYC Subway:On-board R-142A (6) #7339(Whitlock Avenue to Parkchester) (http://www.youtube.com/watch?v=i0qj57ll8gw#)
if you hear anything interesting or whatever feel free2 use them.
-
R179 Version 7 is now released with new textures and sounds. Enjoy! 8)
Download here. (http://forums.bvestation.com/index.php?topic=336.0)
That looks great! I'm not sure how you can improve on your R-142A and R-179A with these sounds:
if you hear anything interesting or whatever feel free2 use them.
Thanks for the sounds 4 express.
-
ive downloaded and redownloaded the trains but i only see white boxes and no panel
-
SIR did you get my PM?
-
ive downloaded and redownloaded the trains but i only see white boxes and no panel
Download the one that is not the update.
SIR did you get my PM?
Yeah, I'll definitely get around to making one. What line is it for?
Also, how can I get the R179 interior to stay lit up like the LU 1995 train?
-
So, I just downloaded the R179, but when I ran it on openBVE, the train came up as a bunch of whiteboxes, and when I switched to interior view, the train became invisible. How can I fix this?
-
SIR did you get my PM?
Yeah, I'll definitely get around to making one. What line is it for?
Also, how can I get the R179 interior to stay lit up like the LU 1995 train?
[/quote]
At the end of every object, add the Emissivecolor Red,Green, Blue Command.
-
So, I just downloaded the R179, but when I ran it on openBVE, the train came up as a bunch of whiteboxes, and when I switched to interior view, the train became invisible. How can I fix this?
Does the sound work?
-
im having the same problem but the sound works
-
Light it up! 8)
(http://i.imgur.com/X4Ys8.png)
(http://i.imgur.com/ED5Hy.png)
(http://i.imgur.com/qsCSL.png)
(http://i.imgur.com/fq2oI.png)
-
now thats what i am talking bout which line is that
-
Thanks! The first three are from the NWM line and the last is the new objects test route.
-
network west midlands
-
@ SIR can you make a (V) and a (L) R179 exterior for the next release?
-
Not sure if anyone mentioned this but a (A) or and (C) would be cool also.
-
Is it also possible for a (W) please?
-
i noticed that when i ran the R142 on the 7 route that the train was longer than the station idk if its the train or the station.
-
i noticed that when i ran the R142 on the 7 route that the train was longer than the station idk if its the train or the station.
The (7) has unrealistic station distances, so its the route that has the problem. When the new version comes out, it'll be more realistic.
-
oh ok thanks
-
Rockaway Parkway Bound R143 L Train @ Wilson Ave (http://www.youtube.com/watch?v=6uy2XyUGAvE#) SIR you should use this in the R143 thanks!!!Cuz the R143 has R142 sounds.
-
Rockaway Parkway Bound R143 L Train @ Wilson Ave (http://www.youtube.com/watch?v=6uy2XyUGAvE#) SIR you should use this in the R143 thanks!!!Cuz the R143 has R142 sounds.
He did that already. Download the updates and run them.
BStyles
-
you said in r179 v7 e trains hae a lcd video screen but i dnt see one
-
The final version of the R142 has been released and features new interior textures! Bstyles' R142, when released, will be more advanced and realistic. For now, enjoy! 8)
Updates are a little slower because of the summer time but I do plan on adding more lines to the R179 package.
-
Great work, however, you might want to illuminate the exterior leds/lcds
-
Major update to the R142 & R142A released! The R142 now has a hissing sound and the R142A sounds are now more accurate. The next and final version, will feature animated and illuminated signs. Also, the next R179 release will feature (A) and (B) trains thanks to JayJay85.
Download Here (http://forums.bvestation.com/index.php?topic=336.msg3031#msg3031)
Enjoy! 8)
-
If my computer gets restored I will send you an animated file to copy from which entails the code for animating signs with the font and correct colors. Give me a week or 2.
-
If my computer gets restored I will send you an animated file to copy from which entails the code for animating signs with the font and correct colors. Give me a week or 2.
Nice, I was going to use your <6> train as a template for the animated signs but that will work too!
-
Very nice improvements! However, is it possible to get clearer R142 recording. The motor sound, especially the first two notes, seems to contain a lot of static noise.
-
so will the new version of the R142/A contain the blinking yellow light and a find display
-
why does the R179 Q bombardier sounds like the R143
-
Very nice improvements! However, is it possible to get clearer R142 recording. The motor sound, especially the first two notes, seems to contain a lot of static noise.
Sure, I can get that done.
so will the new version of the R142/A contain the blinking yellow light and a find display
Not on my version but mostly likely Bstyles R142 will have that.
why does the R179 Q bombardier sounds like the R143
The R179 is a fictional train and there should be two versions of the Q train. One with the R143 sounds and 1 with the R160 sounds.
-
Very nice new R142/A. Looking forward to those future updates ;D
-
The updates are great! Nice Work (SIR).
-
which version got the hissing sound
-
which version got the hissing sound
R142 (the one with the Alstom propulsion)
-
all 4142 have that propulsion
-
all 4142 have that propulsion
Yeah, the R142's do, but the R142A's have Bombardier propulsion. Big difference there in terms of sound, that's why it is easy to tell if you are riding an R142 or R142A because of the propulsion sound. SIRNSL made an R142 and R142A, and its the R142 that has the hissing.
-
thx i meant do all r142s have the hissing
-
Yes they all have the hissing sound it's just that all the R142s don't sound the same.
-
hey (SIR) or anyone else...im a huge fan of openbve but im not as active
i do have a question though: the R179 has the exterior and the sounds like the R160, the only difference is the panel
if someone could tell me if thats true or not...that would be great ;D
-
hey (SIR) or anyone else...im a huge fan of openbve but im not as active
i do have a question though: the R179 has the exterior and the sounds like the R160, the only difference is the panel
if someone could tell me if thats true or not...that would be great ;D
Well, there are no big differences except the route icon in the CBTC screen and the fact that it says "R179A" on the panel instead of R160, so I guess you could say it is sort-of true.
BTW, SIR, since the R179 already has working interior LED's, will you also (if it's possible) make them synchronized with what station you are at, as long as you are driving the right route? Like, for example, if I was driving the (F) train and I was just at Kings Hwy station, it would say that the next stop is Avenue P, and so on, instead of just always saying that the next stop is Parsons Blvd. Just a suggestion...
-
BTW, SIR, since the R179 already has working interior LED's, will you also (if it's possible) make them synchronized with what station you are at, as long as you are driving the right route? Like, for example, if I was driving the (F) train and I was just at Kings Hwy station, it would say that the next stop is Avenue P, and so on, instead of just always saying that the next stop is Parsons Blvd. Just a suggestion...
I don't think it's possible in openbve
-
I don't think it's possible in openbve
I'm sure it's possible, and I'm also sure there's more than one way to do it. However, it would require some addons, and a little programming. I started doing some research on that about a week back. Hopefully I get some good results.
-
hey (SIR) or anyone else...im a huge fan of openbve but im not as active
i do have a question though: the R179 has the exterior and the sounds like the R160, the only difference is the panel
if someone could tell me if thats true or not...that would be great ;D
Well, there are no big differences except the route icon in the CBTC screen and the fact that it says "R179A" on the panel instead of R160, so I guess you could say it is sort-of true.
BTW, SIR, since the R179 already has working interior LED's, will you also (if it's possible) make them synchronized with what station you are at, as long as you are driving the right route? Like, for example, if I was driving the (F) train and I was just at Kings Hwy station, it would say that the next stop is Avenue P, and so on, instead of just always saying that the next stop is Parsons Blvd. Just a suggestion...
thanks for the info bro, and that idea was in my head to.
i hope (SIR) or someone could figure out how to do that
-
It is possible through the use of a plugin and beacon commands I think.
-
It is possible through the use of a plugin and beacon commands I think.
Yes, something like that. the current station I think is the easiest one, or the destination, since it registers it as a *Terminal Station*
-
hey (SIR) or anyone else...im a huge fan of openbve but im not as active
i do have a question though: the R179 has the exterior and the sounds like the R160, the only difference is the panel
if someone could tell me if thats true or not...that would be great ;D
Well, there are no big differences except the route icon in the CBTC screen and the fact that it says "R179A" on the panel instead of R160, so I guess you could say it is sort-of true.
BTW, SIR, since the R179 already has working interior LED's, will you also (if it's possible) make them synchronized with what station you are at, as long as you are driving the right route? Like, for example, if I was driving the (F) train and I was just at Kings Hwy station, it would say that the next stop is Avenue P, and so on, instead of just always saying that the next stop is Parsons Blvd. Just a suggestion...
The real R179 will most likely be another rendition of the R143 & R160 so that's why it seems so similar in OpenBVE but when the real R179 design is released, I'll definitely change it up.
Also, I would like that feature more than anything subwaytrainoperator but it's only possible through a plugin like DJ Hammers mentioned which is an area that I have no expertise on. I used to only develop new sounds for BVE4 trains so actually developing trains for OpenBVE is still new to me right now.
The next train due for an update will be the R143.
-
In order for the beacon command to work well with the train, it must be specified in the route file what system will you be running. On top of that the ATS system must be installed properly on the train itself. For example if you check out what Rayvon did with the Riverbank Park Shuttle you will see what I mean.
If you look at the beginning of the route you will see the change.route command, and you will see the beacon command displayed through out the route.
-
Well, there are no big differences except the route icon in the CBTC screen and the fact that it says "R179A" on the panel instead of R160, so I guess you could say it is sort-of true.
BTW, SIR, since the R179 already has working interior LED's, will you also (if it's possible) make them synchronized with what station you are at, as long as you are driving the right route? Like, for example, if I was driving the (F) train and I was just at Kings Hwy station, it would say that the next stop is Avenue P, and so on, instead of just always saying that the next stop is Parsons Blvd. Just a suggestion...
I have an idea but i don't know if it's possible or practical
This will only be possible for one route and direction per train so you will have to make different versions for different lines.
At every station the find and everything else that changes at a station can be changed to the next station by pressing 4 or Home(example keys). For example, the J train, at Norwood Avenue it says: To Broad Street | The Next Stop Is | Cleveland St. | 8:00 AM then aproaching the station change it to say: This Is | Cleveland St | This Is | Cleveland St and so on. I do not know how to code this but it is my idea and I can explain the concept to the person who would like to create this by PM. I want to be acknowledged if my idea is used
-
I am awaiting the code from Aaron. When I receive it I will be able to modify it to those request. This can be accomplished using a key command just like the R38 roll signs for openBVE. Until then the train will be standard as how SIR made it.
-
Well, there are no big differences except the route icon in the CBTC screen and the fact that it says "R179A" on the panel instead of R160, so I guess you could say it is sort-of true.
BTW, SIR, since the R179 already has working interior LED's, will you also (if it's possible) make them synchronized with what station you are at, as long as you are driving the right route? Like, for example, if I was driving the (F) train and I was just at Kings Hwy station, it would say that the next stop is Avenue P, and so on, instead of just always saying that the next stop is Parsons Blvd. Just a suggestion...
I have an idea but i don't know if it's possible or practical
This will only be possible for one route and direction per train so you will have to make different versions for different lines.
At every station the find and everything else that changes at a station can be changed to the next station by pressing 4 or Home(example keys). For example, the J train, at Norwood Avenue it says: To Broad Street | The Next Stop Is | Cleveland St. | 8:00 AM then aproaching the station change it to say: This Is | Cleveland St | This Is | Cleveland St and so on. I do not know how to code this but it is my idea and I can explain the concept to the person who would like to create this by PM. I want to be acknowledged if my idea is used
Already possible, the Hong Kong developers have got a working prototype.
-
Already possible, the Hong Kong developers have got a working prototype.
Pretty much anything with OpenBVE is possible. I'm still trying to get that going
-
Already possible, the Hong Kong developers have got a working prototype.
Pretty much anything with OpenBVE is possible. I'm still trying to get that going
It's time we give other rail-sims some competition. I hope that one day OpenBVE will be a Railworks quality simulation. I thank all the developers who take the time to continually evolve OpenBVE. :D
-
It's time we give other rail-sims some competition. I hope that one day OpenBVE will be a Railworks quality simulation. I thank all the developers who take the time to continually evolve OpenBVE. :D
You're a bit late on the news.
http://railsimroutes.co.uk/blog/ (http://railsimroutes.co.uk/blog/)
-
unless we can somehow implement a LED typeset into the display, the amount of images needed to make that plausible would be insane
-
unless we can somehow implement a LED typeset into the display, the amount of images needed to make that plausible would be insane
Yes when you think it through but I have 210 GB left on my computer and I'm just trying to help. If you have a better idea that's awesome but that's the best I can come up with. with almost 500 stops in the system and 24 routes i think it's pretty hard to make my idea a reality.
-
R179 Version 8 update released! You must have version 7 installed already before installing version 8.
-
R179 Version 8 update released! You must have version 7 installed already before installing version 8.
What are the differences between Version 7 and 8?
-
R179 Version 8 update released! You must have version 7 installed already before installing version 8.
Great update, but, ehh, didn't you say in an earlier post that the R143 was the next one to be updated after the R142/A v9? ???
-
It was supposed to be, but the R143 is going to have a new panel so it may take a bit longer. And since the (D) was released, I thought it would be nice to have an updated (D) R179 along with the rest.
-
It was supposed to be, but the R143 is going to have a new panel so it may take a bit longer. And since the (D) was released, I thought it would be nice to have an updated (D) R179 along with the rest.
Ok, is the R143 going to have Mr Railfan's panel? Or some other panel you are going to create yourself? Just asking ::)
-
Yo SIR you might wanna use these to animate the interior. If you dont know how to animate it, see me on TS Thursday if you can.
(http://i1178.photobucket.com/albums/x364/Imanuel_Agard/MTA%20New%20York%20City%20Transit%20Authority/D_tobaypkwy.png)
(http://i1178.photobucket.com/albums/x364/Imanuel_Agard/MTA%20New%20York%20City%20Transit%20Authority/D_to205.png)
(http://i1178.photobucket.com/albums/x364/Imanuel_Agard/MTA%20New%20York%20City%20Transit%20Authority/D_time1.png)
(http://i1178.photobucket.com/albums/x364/Imanuel_Agard/MTA%20New%20York%20City%20Transit%20Authority/D_6avexp.png)
(http://i1178.photobucket.com/albums/x364/Imanuel_Agard/MTA%20New%20York%20City%20Transit%20Authority/D_toconey.png)
-
Yo SIR you might wanna use these to animate the interior. If you dont know how to animate it, see me on TS Thursday if you can.
(http://i1178.photobucket.com/albums/x364/Imanuel_Agard/MTA%20New%20York%20City%20Transit%20Authority/D_tobaypkwy.png)
(http://i1178.photobucket.com/albums/x364/Imanuel_Agard/MTA%20New%20York%20City%20Transit%20Authority/D_to205.png)
(http://i1178.photobucket.com/albums/x364/Imanuel_Agard/MTA%20New%20York%20City%20Transit%20Authority/D_time1.png)
(http://i1178.photobucket.com/albums/x364/Imanuel_Agard/MTA%20New%20York%20City%20Transit%20Authority/D_6avexp.png)
(http://i1178.photobucket.com/albums/x364/Imanuel_Agard/MTA%20New%20York%20City%20Transit%20Authority/D_toconey.png)
I might be doing R143 V10 Project with him and I lik your signs I will animate them but if you can resize them and put L on the signs I will use yours even thou i can make them I want to see yours on the train
-
R143 V8.9 Released! It includes new sounds, a tweaked train.dat file and a new exterior. There are a few changes I would like to make before I release version 9 and I also want to check out Pito's R143 first as well and see what he's been working on. The new panel by Mr. Railfan has not been completed yet but when it is, it will be released with this R143.
Download is on the first page. 8)
-
Just out of curiosity, why are the train files so large in files? They seem to be even larger than some the most detailed routes we have here.
-
It's just a combination of the sound files as well as the exterior files. OpenBVE development in 2011 is much further than it has been in years and it's now able to handle higher detailed sounds and objects as you already know. If anyone's pc/laptop can't handle the NTT files whether it's due to file space, old graphics card or slow internet, the only sound advice I could give is to not download it.
-
It's just a combination of the sound files as well as the exterior files. OpenBVE development in 2011 is much further than it has been in years and it's now able to handle higher detailed sounds and objects as you already know. If your pc/laptop can't handle the NTT files whether it's due to file space, old graphics card or slow internet, then the only option is to not download it.
Too reduce the size , you should package the train with .7z . i guarantee it will reduce the file size by 50% if not more. Anyways ive been a bit busy and haven't touched the 143 cab yet but i will soon .
-
That's a good idea, I'll update the files soon so that they are .7z to reduce the sizes. And don't worry about it, it's no rush! ;)
-
also there are a few things i noticed while testing:
This train contains a FIND system while their real life counterpart has a strip map
This train contains metal ends by the cab while the real life counterpart has like a light grey wall paper [IDK what its called]
Also on the back of the exterior LED sign [Thats the inside] , is another screen which has a Led display which shows Information like [Access a ride phone number , bus info , metrocard info, etc.] unlike in the 160 where it has been replaced by a picture .
i think updating this would make the train better and more realistic.
But overall great job.
-
also there are a few things i noticed while testing:
This train contains a FIND system while their real life counterpart has a strip map
This train contains metal ends by the cab while the real life counterpart has like a light grey wall paper [IDK what its called]
Also on the back of the exterior LED sign [Thats the inside] , is another screen which has a Led display which shows Information like [Access a ride phone number , bus info , metrocard info, etc.] unlike in the 160 where it has been replaced by a picture .
i think updating this would make the train better and more realistic.
But overall great job.
Thanks for the feedback! That's exactly why I numbered this version 8.9 instead of 9 because I wanted to add in the LED info box, change that metal part but I think the R143s are due to receive FIND systems in the near future. I also want to change the color of the R143 interior so that it is more sterile like the R142As. Right now it's just a modified R179 (M) train.
Also if possible would any like to create a texture for the (L) strip map? I can't get a solid picture of it without the poles in the way.
-
First off, I know pitor160 PMed me about an R143 strip map a while ago and to be quite honest, I forgot about it until I saw SIR's post. I apologize for that.
Now that that's out of the way, I've got around to making one. I know it's not exactly like the ones on the real R143s, but I've never been on that particular train type and you wouldn't believe how hard it is to find decent pics of the strip maps on the net. Also, I don't know if you wanted a .png file or a .bmp one so did both.
.png
(http://i776.photobucket.com/albums/yy44/lance522/R143L.png)
.bmp
(http://i776.photobucket.com/albums/yy44/lance522/R143L-1.jpg)
You're welcome.
-
@Lance those looks great.
@Pitor I will be glad to shell but make sure you put Lance's name in it. Most of this work stems from the fonts he released.
-
First off, I know pitor160 PMed me about an R143 strip map a while ago and to be quite honest, I forgot about it until I saw SIR's post. I apologize for that.
Now that that's out of the way, I've got around to making one. I know it's not exactly like the ones on the real R143s, but I've never been on that particular train type and you wouldn't believe how hard it is to find decent pics of the strip maps on the net. Also, I don't know if you wanted a .png file or a .bmp one so did both.
.png
(http://i776.photobucket.com/albums/yy44/lance522/R143L.png)
.bmp
(http://i776.photobucket.com/albums/yy44/lance522/R143L-1.jpg)
You're welcome.
Thanks Lance I will be implenting them today on the R143
-
Yo pitor do you have AIM i need to talk to you.
-
First off, I know pitor160 PMed me about an R143 strip map a while ago and to be quite honest, I forgot about it until I saw SIR's post. I apologize for that.
Now that that's out of the way, I've got around to making one. I know it's not exactly like the ones on the real R143s, but I've never been on that particular train type and you wouldn't believe how hard it is to find decent pics of the strip maps on the net. Also, I don't know if you wanted a .png file or a .bmp one so did both.
.png
(http://i776.photobucket.com/albums/yy44/lance522/R143L.png)
.bmp
(http://i776.photobucket.com/albums/yy44/lance522/R143L-1.jpg)
You're welcome.
Wow, that looks excellent Lance! Thanks for making one so quickly and I'll make sure to add your name to the credits. 8)
Thanks Lance I will be implenting them today on the R143
Check your email.
-
SIR you got those images?
-
SIR you got those images?
Not for the grey wallpaper ends. If anyone wants to help with that as well it would be appreciated.
-
lol im talking about the Interior leds i posted here
-
Oh lol, yeah I'll add them to the R179 when I start working on that again.
Here's a pic of the R143 interior with the strip maps and the correct floor color:
(http://i.imgur.com/XkeV5.png)
-
Yo pitor do you have AIM i need to talk to you.
I sent you a PM look at it
-
i dont know if this will help in anyway , but today i confirmed that the r143 can be programmed into any line and have all of the routes programmed in for automated announcements just like their cousins the r160 . Before i only thought they had the M and the L . im uploading the vid i took of that and ima post it here .
-
removed
-
Quick Question.... Why so many versions? Why not just wait till your happy with what you did then release.. 10 versions of the R142... ( Not saying its bad I just hate downloading the same thing over and over again with just a few small updates)
-
I actually like how (SIR) is releasing incremental updates.
-
Quick Question.... Why so many versions? Why not just wait till your happy with what you did then release.. 10 versions of the R142... ( Not saying its bad I just hate downloading the same thing over and over again with just a few small updates)
There minor or major updates in the sounds and or exterior
-
Quick Question.... Why so many versions? Why not just wait till your happy with what you did then release.. 10 versions of the R142... ( Not saying its bad I just hate downloading the same thing over and over again with just a few small updates)
There minor or major updates in the sounds and or exterior
The updating process it good it's like an overwrite when you install them to the computer.
There needs to be work on the doors and signage. Instead of using photo pictures try creating the interior panel from scratch like for example the interior LED.
The exterior should also be hand drawn because when I looked the train yesterday it's slightly not the trains exterior cause I can still see in the window from the side of the sign.
Other than that good work. If you need help just ring the alarm. Lol
-
I agree. The exterior doors look out of place with the train's texture. However, I don't see an easy solution because you would have to photoshop the exterior doors to achieve the same color of the exterior skin, or get a brand new texture altogether.
The train also needs to have its body reconfigured. Right now, the undercar section is too small and the body too big, so when the train pulls into the station, part of the door lays submerged from the station. Easy fix is to make the undercar section bigger.
Fun idea, is it possible to feature those moving LED screens found on some R143s. It would be cool to see this thing fully animated.
-
R143 Version 9 is now released. It has the strip maps thanks to Lance, a new exterior and louder sounds.
And those are all great ideas. I want the R143 to look realistic as possible so if anyone else wants to help out or change any of the png files to make it look better feel free to do so! 8) I can always add the changes to a newer version.
-
nice train but try to update the doors other than that its great
-
Thanks, that's on my list of things to do actually. All of the downloads are now .7z form and it really cut down on the size.
-
Thanks, that's on my list of things to do actually. All of the downloads are now .7z form and it really cut down on the size.
I'll send you the interior LED panel tonight. I have your email already.
-
Try changing the wall texture of the R143 to a new one; I noticed that in the texture it already has, you can see part of a seat and railing
Take a look at this picture I uploaded to Flickr to see what I mean: http://www.flickr.com/photos/66557704@N02/6097865450/#in/photostream (http://www.flickr.com/photos/66557704@N02/6097865450/#in/photostream)
-
Try changing the wall texture of the R143 to a new one; I noticed that in the texture it already has, you can see part of a seat and railing
Take a look at this picture I uploaded to Flickr to see what I mean: http://www.flickr.com/photos/66557704@N02/6097865450/#in/photostream (http://www.flickr.com/photos/66557704@N02/6097865450/#in/photostream)
I have fixed it dont worry i will upload a pic soon
-
i dont know if this will help in anyway , but today i confirmed that the r143 can be programmed into any line and have all of the routes programmed in for automated announcements just like their cousins the r160 . Before i only thought they had the M and the L . im uploading the vid i took of that and ima post it here .
Not to be disrespectful but weres the vid
-
I just finished driving the V train and got me wondering if you guys are going to make a R179 V train
in the meantime before we even know what is actually going on with the orange M train line it is not
meant to be mean in any way shape or form it is just a suggestion
-
i dont know if this will help in anyway , but today i confirmed that the r143 can be programmed into any line and have all of the routes programmed in for automated announcements just like their cousins the r160 . Before i only thought they had the M and the L . im uploading the vid i took of that and ima post it here .
Not to be disrespectful but weres the vid
I agree, I'll believe it when I see it.
-
i dont know if this will help in anyway , but today i confirmed that the r143 can be programmed into any line and have all of the routes programmed in for automated announcements just like their cousins the r160 . Before i only thought they had the M and the L . im uploading the vid i took of that and ima post it here .
Not to be disrespectful but weres the vid
I agree, I'll believe it when I see it.
Just because it isn't done doesn't mean it's not possible. BTW, SIR, I haven't been able to check the trains lately, but do they have curved roofs?
-
Yes for the exterior.
-
i dont know if this will help in anyway , but today i confirmed that the r143 can be programmed into any line and have all of the routes programmed in for automated announcements just like their cousins the r160 . Before i only thought they had the M and the L . im uploading the vid i took of that and ima post it here .
Not to be disrespectful but weres the vid
Havent gotten a chance to upload it . Basicly i asked the conductor at 8th ave if he can change it to another program besides the L and M and he said he only knows one code so he put up the J to broad st and said the 143 works just like the 160 when putting up the route program [enter in a Code and itll put up the program u want]
-
Just because it isn't done doesn't mean it's not possible. BTW, SIR, I haven't been able to check the trains lately, but do they have curved roofs?
I guess you never heard of the term, "pics or it didn't happen."
I could almost literally say anything and would you believe it?
-
i dont know if this will help in anyway , but today i confirmed that the r143 can be programmed into any line and have all of the routes programmed in for automated announcements just like their cousins the r160 . Before i only thought they had the M and the L . im uploading the vid i took of that and ima post it here .
Not to be disrespectful but weres the vid
Havent gotten a chance to upload it . Basicly i asked the conductor at 8th ave if he can change it to another program besides the L and M and he said he only knows one code so he put up the J to broad st and said the 143 works just like the 160 when putting up the route program [enter in a Code and itll put up the program u want]
Ok Take your time to upload
-
also there are a few things i noticed while testing:
This train contains a FIND system while their real life counterpart has a strip map
This train contains metal ends by the cab while the real life counterpart has like a light grey wall paper [IDK what its called]
Also on the back of the exterior LED sign [Thats the inside] , is another screen which has a Led display which shows Information like [Access a ride phone number , bus info , metrocard info, etc.] unlike in the 160 where it has been replaced by a picture .
i think updating this would make the train better and more realistic.
But overall great job.
Thank You I noticed that too. Also instead of having the regular storm door I saw the cab door on both ends of the first car.
-
Just because it isn't done doesn't mean it's not possible. BTW, SIR, I haven't been able to check the trains lately, but do they have curved roofs?
I guess you never heard of the term, "pics or it didn't happen."
I could almost literally say anything and would you believe it?
I have heard of it. But when it comes to computers, this is pretty much possible.
-
Just because it isn't done doesn't mean it's not possible. BTW, SIR, I haven't been able to check the trains lately, but do they have curved roofs?
I guess you never heard of the term, "pics or it didn't happen."
I could almost literally say anything and would you believe it?
Heres the 143 J at 8av on the L. Look at the car number if you dont believe its a R143
R143 J train at 8ave Manhattan (http://www.youtube.com/watch?v=HRVzDmwDg24#)
-
I've asked this before but would anyone like to modify the R143 exterior to look more like an R143? I'm very satisfied with the way it sounds now and I'll add more versions of the R143 in the future like the R179. I would like to move on to creating a new Siemens R179 but I want to release a new exterior for the R143 first! 8)
-
This is what the 9.0 R143 sounds like:
OpenBVE - NYCT (L) Train (Broadway Junction to Wilson Av) (http://www.youtube.com/watch?v=ikAnqD6rkRw#ws)
I'm done working on the sounds and train.dat for all the trains except for the siemens R179 which I will reveal soon (after the R143 10.0) . Are they fine with all of you who downloaded the trains?
-
If you need the front for the R143 I hav a clear 1 with the R143 because the 1 u hav it looks lik u or some1 copy and pased the flags to a different position
-
anyone want my mixed train announcements just pm me and ill send it to u and good luck
-
If you need the front for the R143 I hav a clear 1 with the R143 because the 1 u hav it looks lik u or some1 copy and pased the flags to a different position
Looks fine to me but compare it and you 2 decide.
-
Hey SIR, can I refurbish the R142A exterior/interior?
-
Hey SIR, maybe you could use this as your R179 version 9 or 10
NOT MY VIDEO!!!
R160(Z)9958 departing sutphin blvd archer avenue jfk airport stop!. (http://www.youtube.com/watch?v=tfN44k7TwRY#)
-
Hey guys I am editing this model to make a simple and easy (7) train, if (Sir) doesn't want it, then progress will stop. It will feature a different exterior/interior.
-
Speaking of (7) Trains, will you also make an R188 sometime in the future, SIRNSL?
-
Speaking of (7) Trains, will you also make an R188 sometime in the future, SIRNSL?
I could do one.
-
If you need the front for the R143 I hav a clear 1 with the R143 because the 1 u hav it looks lik u or some1 copy and pased the flags to a different position
Sure, what does the front of your R143 look like?
Hey guys I am editing this model to make a simple and easy (7) train, if (Sir) doesn't want it, then progress will stop. It will feature a different exterior/interior.
I don't mind if anyone wants to modify the trains on their own computer. But if you would like to release a modified version for everyone else to download, just PM me, I'll check it out and release it on the first page of this thread. Do you have any pics of your work so far?
Speaking of (7) Trains, will you also make an R188 sometime in the future, SIRNSL?
Yeah definitely, just waiting to see how the R188 will be designed IRL.
Hey SIR, maybe you could use this as your R179 version 9 or 10
NOT MY VIDEO!!!
Thanks I'll try to make use of them for a few of the R179s.
-
Will Mr. Railfan's new R143 panel (http://telewizor.eu) be put in once it's finished?
-
Will Mr. Railfan's new R143 panel be put in once it's finished?
Yes, it will. He said so earlier in the thread.
-
http://www.mediafire.com/?83ubvbasj3ea4c6 (http://www.mediafire.com/?83ubvbasj3ea4c6)
Heres my train, SIR said hes going to put new sounds in it, but try it out here! INCOMEPLETE PANEL, NEED HELP TO CHANGE NUMBER!
-
R142A I can change the number and SIR North Shore I will send u the front later and the back so u can implent both if that's ok because the R143 only has the front and uses the R179_Front fot the back of the train
-
Will The R142 and R142A you are making have 3D cabs?
-
r142a 7767, Your link does not work
-
it works to me
-
Will The R142 and R142A you are making have 3D cabs?
Me? No.
@Pegasusleos4 - Visit my thread.
-
What do you mean by vist your thread. can you post ur link up plz :)
-
nvm LOL ;D :)
-
The R142 done by BStyles will have 3D effects
-
Can't wait :) :) :) :)
-
The R142 done by BStyles will have 3D effects
Hows ur 142
-
The R142 done by BStyles will have 3D effects
Hows ur 142
I will post shots at a later time. So far the R142A will have BStyles (BDC International) animated wheels. The body will have a rounder look than SIR's current model. Nothing else will be changed except the exterior and certain sounds I recorded from the 6 line.
Right now I'm having problems shaping the exterior. So it will be a little longer for some updates
-
The R142 done by BStyles will have 3D effects
Hows ur 142
I will post shots at a later time. So far the R142A will have BStyles (BDC International) animated wheels. The body will have a rounder look than SIR's current model. Nothing else will be changed except the exterior and certain sounds I recorded from the 6 line.
Right now I'm having problems shaping the exterior. So it will be a little longer for some updates
Ohh Cool if u got the code pm it to me 4 implenting on the 143
-
It needs adjustments so it will be a while before i send anything im trying to figure out how to bring the wheels closer so they look IRT standard.
-
It needs adjustments so it will be a while before i send anything im trying to figure out how to bring the wheels closer so they look IRT standard.
Well, it's not just standard for the IRT. All trucks used by the current rolling stock have their wheels 6' 10" apart from each other. Just wanted to point that out.
-
It needs adjustments so it will be a while before i send anything im trying to figure out how to bring the wheels closer so they look IRT standard.
Well, it's not just standard for the IRT. All trucks used by the current rolling stock have their wheels 6' 10" apart from each other. Just wanted to point that out.
Thanks I actually got it. I will post a screenshot later. Anyone knows how to use Sketchup? I am trying to make a better exterior.
-
Awesome!
-
does the new R142 have an exterior?
-
It will take some time for a new exterior. Here is a video of what I have done. I know you gotta skip thru the first scenes but you will see the 3D wheels on the R142.
NYCTransitViews - News Cast 1 (http://www.youtube.com/watch?v=3pt92SIgLyk#)
-
nice
-
The R142A has some errors there are some files coded that arent even in the folder. you may wan to check that out SIR
-
manny! would you be kind enough to code for BVE 2?
-
manny! would you be kind enough to code for BVE 2?
I will try I finally learned the .rw coding. Maybe something can be worked out
-
thanks Manny! ur the best! BARK
-
thanks Manny! ur the best! BARK
LMFAO! I can't believe you did that lol
-
Hey SIR is the R143 is going to have the jumping brakes because in real life on CBTB the train jump when it about to fully stop
-
Hey SIR is the R143 is going to have the jumping brakes because in real life on CBTB the train jump when it about to fully stop
That "jumping" is a side affect of the way the CBTC system accurately stops the train. The R143 is perfectly capable of stopping without this "jumping".
-
Hey SIR is the R143 is going to have the jumping brakes because in real life on CBTB the train jump when it about to fully stop
the jumping is an ATO thing, i think it has to do with the way it applies the brakes (not too sure though).
when the R143's are operated by a person the brakes do not 'jump' like that.
-
i have redesigned the ext it will feature no animated doors due to the crookedness of the other 1 if any1 can do it properly please pm me now i am doin the int. beta testing for new propulsion will begin in 1-3 weeks
-
i have redesigned the ext it will feature no animated doors due to the crookedness of the other 1 if any1 can do it properly please pm me now i am doin the int. beta testing for new propulsion will begin in 1-3 weeks
Look out for the next video. It will debut the Downtown (6) via the (4) and the new animated sign and interior signs with 3D Wheels.
-
cool Can't wait ;D
-
if any1 can help me please contact me
-
Can you make a R179 with the fictional routes integrated in it?
-
There going to be a 7 R142 or R142A
-
Hey SIR is the R142 and the R142A going to have Mr.RailFan cab
-
There going to be a 7 R142 or R142A
R142A 7767 already made an R142A (7) Train, and SIRNSL will make an R188 in the future.
-
oh thanks
-
Hey SIR is the R142 and the R142A going to have Mr.RailFan cab
The realistic R142A and R142 is being done by BStyles, myself and MrRailfan. I have asked permission for his panel. When completed you will see BStyles topic updated.
SIR's R142 and R142A will feature working head lights. When put in E-Brake the lights will change from regular headlights to the regular red glow. That will be completed in February unless done earlier by himself. This version will have interior and exterior destination and hopefully an animated strip map and LCD screen.
-
Ant update for the R142,R142A,R143,and R179 :D
-
Ant update for the R142,R142A,R143,and R179 :D
These nuts. Lol
-
Ant update for the R142,R142A,R143,and R179 :D
If there haven't been any posts from the developers, then obviously not =P
And just incase anyone didn't notice, but as downloaded, the R179 v8.0 trains are a bit too close together. the spacing should b changed from 18.35 to 18.65 or .70 for a more realistic exterior view.
-
There seems to be a lot of confusion going on as it seems there are multiple R142A & R143 projects going on but I don't think you should post that you are working on it until you have something to show for it! And when you do, create a new thread for it, post screenshots, videos, etc.! There's nothing wrong with having two versions of the same train but why waste your time saying you're working on this and that and then we never hear about that train again.
My next projects are the Siemens R179 and a new R142A with HD sounds, and combine the animated signs from the <6> with the new interior from the (7).
-
hay does any one have a r40 exteior view i need help
-
hay i am having troble with a extior view of the r40 can i have some help plez :'(
-
I doubt anyone has any Exterior Views for the R40
for open-bve That's why the actual R40 Slant which is currently available got no Exterior/interior etc
-
i have one more question y when i download routes all i see is a dark screen with light
i use openbve
-
There seems to be a lot of confusion going on as it seems there are multiple R142A & R143 projects going on but I don't think you should post that you are working on it until you have something to show for it! And when you do, create a new thread for it, post screenshots, videos, etc.! There's nothing wrong with having two versions of the same train but why waste your time saying you're working on this and that and then we never hear about that train again.
My next projects are the Siemens R179 and a new R142A with HD sounds, and combine the animated signs from the <6> with the new interior from the (7).
SIR I am going to send you the final R143 V8.2 So you can make your final touches on the 24.
-
i have one more question y when i download routes all i see is a dark screen with light
i use openbve
You must have all the objects required
-
i have one more question y when i download routes all i see is a dark screen with light
i use openbve
Please take the time to post a thread in the support section of the forum instead of lowering the quality of this fine development thread with irrelevant pap.
smh just posted about this behavior a minute ago...
-
There seems to be a lot of confusion going on as it seems there are multiple R142A & R143 projects going on but I don't think you should post that you are working on it until you have something to show for it! And when you do, create a new thread for it, post screenshots, videos, etc.! There's nothing wrong with having two versions of the same train but why waste your time saying you're working on this and that and then we never hear about that train again.
My next projects are the Siemens R179 and a new R142A with HD sounds, and combine the animated signs from the <6> with the new interior from the (7).
SIR I am going to send you the final R143 V8.2 So you can make your final touches on the 24.
Sounds good! Also the R142A actually sounds like an R142A now, I'll release a preview of the new sounds soon.
-
There seems to be a lot of confusion going on as it seems there are multiple R142A & R143 projects going on but I don't think you should post that you are working on it until you have something to show for it! And when you do, create a new thread for it, post screenshots, videos, etc.! There's nothing wrong with having two versions of the same train but why waste your time saying you're working on this and that and then we never hear about that train again.
My next projects are the Siemens R179 and a new R142A with HD sounds, and combine the animated signs from the <6> with the new interior from the (7).
SIR I am going to send you the final R143 V8.2 So you can make your final touches on the 24.
Sounds good! Also the R142A actually sounds like an R142A now, I'll release a preview of the new sounds soon.
SIR By any chance do you know how to animate doors
-
Obviously.....why do you think the R179 has animated doors? ??? Honestly,reading is fundamental.
-
Obviously.....why do you think the R179 has animated doors? ??? Honestly,reading is fundamental.
You do realize that other people could have helped him put in the animated doors.....
-
Cool!! Can't wait for the Sieman's set!! Love the sounds. Hope this will have the individual route letters on the panel like the 179 has now.
-
I don't know how to animate the doors. I only work with the sounds, panel & exterior graphics.
Cool!! Can't wait for the Sieman's set!! Love the sounds. Hope this will have the individual route letters on the panel like the 179 has now.
Thanks! And I plan on making it the same with the route letters on the panel. Can you check ur pm tjay?
-
New download link is up on the first page (http://forums.bvestation.com/index.php?topic=336.0) for the R142A 2012 Preview! have fun 8)
-
You should put R143 V10 in Development by PitoR160 with help of Andrew(Animated Front, Side, and Interior Signs) and (SIR) North Shore Line.
-
You should probably make your own topic for your own project.
BStyles
-
You should probably make your own topic for your own project.
BStyles
I already have one on the other developments.
But SIR let me post updates her since its mostly his train.
-
When you're complete with your part of the work pitor160, send me a pm or email.
Also, there is a surprise on the first page (http://forums.bvestation.com/index.php?topic=336.0) thanks to Tjay1724!
-
Which trainset is the newest update.
-
Just need the R143 v10
-
That brings me back. Haven't been on my Highbridge line in years. Lol. Having said that, I need STRAIGHT ON photos of IRT walls. And not slanted if possible. I need at least 45 different walls as well as end wall shots. If anyone can obtain these for me, please let me know. I would like to start work on updating the Highbridge Line.
-
Just a question; will the R142/A get Mr Railfan's panel when it is completed?
-
Is the R143 going to have Mr.Railfan cab
-
Is the R143 going to have Mr.Railfan cab
Yes, IIRC, SIRNSL said he will put Mr Railfan's panel onto the R143 when it is done.
-
These NTT'S for bve are gonna be some true grade stuff
-
As Tjay mentioned the new route is a modification of the Highbridge 8 line into the Metro Transit (4) local train. This is the first version and it will later receive his new objects & details!
NEW OPENBVE ROUTE
MT (4) New Lots Local [Version 1]
DOWNLOAD (http://www.mediafire.com/?5784o54omvy5c8a)
8 MB
-Install to your OpenBVE directory & overwrite files if asked!
-This will replace your current Highbridge 8 Line with the MT (4) Line.
-
Cool , North Shore .
-
when will u update R142
-
As Tjay mentioned the new route is a modification of the Highbridge 8 line into the Metro Transit (4) local train. This is the first version and it will later receive his new objects & details!
NEW OPENBVE ROUTE
MT (4) New Lots Local [Version 1]
DOWNLOAD (http://www.mediafire.com/?5784o54omvy5c8a)
8 MB
-Install to your OpenBVE directory & overwrite files if asked!
-This will replace your current Highbridge 8 Line with the MT (4) Line.
Awesome Cant wait to test it!
-
As Tjay mentioned the new route is a modification of the Highbridge 8 line into the Metro Transit (4) local train. This is the first version and it will later receive his new objects & details!
NEW OPENBVE ROUTE
MT (4) New Lots Local [Version 1]
DOWNLOAD (http://www.mediafire.com/?5784o54omvy5c8a)
8 MB
-Install to your OpenBVE directory & overwrite files if asked!
-This will replace your current Highbridge 8 Line with the MT (4) Line.
I just finished this epic route my friend and ive got to say its kicks ass. Can't wait till the real 4 comes out i got my R142A Ready
-
Thanks everyone! 8) The R142 will be updated later this month. But for now, the new sounds for the R142A are complete and I will update the preview to have the final sounds in the next hour.
-
nice ;D
-
Nice :D this is gonna be good I cannot wait for the R142A/R142 to be updated
good job once again
-
NEW UPDATE!
OpenBVE R142A [2012 Preview]
DOWNLOAD (http://www.mediafire.com/?ecl6d012l5f3p06)
18 MB
-New sounds!
-All doors open on the left side!
-Features (2), (4) & 11-car (7) train.
-
Wooooooooooooooooooh
Thanks lol this is gonna be great I am gonna test it when i get the chance which will be soon
-
Nice work SIR. However I need to point out 2 things. 1) The motor sounds only seem to play on P3. Putting the chain in P1 or P2 plays no sound at all. Where as the R142A motors make sounds on all power levels. And 2) For some reason, when you put the train in neutral will moving, the run sounds don't play either. Other than that, nice work.
-
Nice work SIR. However I need to point out 2 things. 1) The motor sounds only seem to play on P3. Putting the chain in P1 or P2 plays no sound at all. Where as the R142A motors make sounds on all power levels. And 2) For some reason, when you put the train in neutral will moving, the run sounds don't play either. Other than that, nice work.
I find what you said very interesting, because I do not get those issues when I drive the train
-
It's on the second preview SIR just put up. I ran the 4 train version.
-
It's on the second preview SIR just put up. I ran the 4 train version.
I downloaded SIR's latest update and drove the (4) train too, and the sound are perfectly fine for me. Try re-installing it
-
The sounds the Exterior Interior and speed is perfect
the braking is even nice I drove it on the (4) just now
and in my words I'm gonna say it drives smooth
no complaints here.
-
NEW DOWNLOAD!
OpenBVE R142 [2012 Preview]
DOWNLOAD (http://www.mediafire.com/?re0rubi1wac2ad5)
7 MB
-New sounds!
-All doors open on the left side!
-Features (4) train.
Also Tjay, the sound volume of the preview trains was lowered so maybe you had the volume too low?
-
Finally got around to installing Tjay's new objects into the (4) line.. I just need help with some areas and the new version will be ready with express & local routes.
(http://i.imgur.com/O6Ayq.jpg)
(http://i.imgur.com/IqhXq.jpg)
(http://i.imgur.com/mmWes.jpg)
-
So in the next (4) train update, the elevated portion is going to resemble the New Lots Line a bit more with only 2 types of stations, renovated & un-renovated. Hopefully some new buildings, the el will be 2-tracks with a gap in the middle from Nevins to Eastern Parkway and 3 tracks from Nostrand to 125th Street.
-
You do realize that there is an actual 4 line under development, right? Just curious.
BStyles
-
You do realize that there is an actual 4 line under development, right? Just curious.
BStyles
Yeah, this release is just to give people something to enjoy while we wait for the real one.
-
Finally got around to installing Tjay's new objects into the (4) line.. I just need help with some areas and the new version will be ready with express & local routes.
(http://i.imgur.com/O6Ayq.jpg)
(http://i.imgur.com/IqhXq.jpg)
(http://i.imgur.com/mmWes.jpg)
Question. Why is there a 86th St in Brooklyn just before Utica, but in real life there is not?
-
Why is there a 125th street on this route
also?
-
It is the fictional Metro Transit 4 line.
-
That could be the case SIR. I'll run the train again. Also, do you have any IRT walls? This is necessary for me to update the Highbridge line. And if you could at all possible, make a sign for the 8 as an R142 and R142A, that would be perfect. (Preferably the R142A love that train. lol)
-
That could be the case SIR. I'll run the train again. Also, do you have any IRT walls? This is necessary for me to update the Highbridge line. And if you could at all possible, make a sign for the 8 as an R142 and R142A, that would be perfect. (Preferably the R142A love that train. lol)
Ok let me know what happens! I don't have any IRT walls though, I used the walls from JayJay's old H line which happened to fit the line perfectly. I plan on releasing the next version of the MT 4 in a couple of hours btw! 8)
-
Cool!! Check your PM.
-
Thanks to all 150 downloaders of the first version! 8)
(http://i.imgur.com/TLeYC.jpg)
Metro Transit (4) Line [Version 2]
DOWNLOAD (http://www.mediafire.com/?29jf4y6e8rw4b54)
9 MB
-Install to your OpenBVE directory!
-If you haven't downloaded it already, the (D) line is required to run this route!
-If you have any questions or comments, feel free to post or leave a pm!
-
Thanks to all 150 downloaders of the first version! 8)
(http://i.imgur.com/TLeYC.jpg)
Metro Transit (4) Line [Version 2]
DOWNLOAD (http://www.mediafire.com/?29jf4y6e8rw4b54)
9 MB
-Install to your OpenBVE directory!
-If you haven't downloaded it already, the (D) line is required to run this route!
-If you have any questions or comments, feel free to post or leave a pm!
YES ITS HERE! :D
And Is This One Express Or Still Local?
-
YES ITS HERE! :D
And Is This One Express Or Still Local?
There's two route files just like the 8 line. Daytime express and night local.
-
YES ITS HERE! :D
And Is This One Express Or Still Local?
There's two route files just like the 8 line. Daytime express and night local.
Alright Yes There Is Finally An Express 8)
-
Somehow it does not work on openbve. It said this message
"Attempted to read or write protected memory. This is often an indication that other memory is corrupt." I don't know why it have this message. Please try to fix this problem thanks :
-
Somehow it does not work on openbve. It said this message
"Attempted to read or write protected memory. This is often an indication that other memory is corrupt." I don't know why it have this message. Please try to fix this problem thanks :
It is not a problem with the train itself, it can be a technical issue. Try downloading the latest stable version of OpenBVE, because I had a problem like that with the development version
-
i download the stable version and it still show up. Could you please check to see if you are having the same problem as me. Thanks :
-
I do not get that problem. Maybe it is just your computer, as that error usually occurs because OpenBVE runs out of memory (either Graphics card or RAM issue)
-
i download the stable version and it still show up. Could you please check to see if you are having the same problem as me. Thanks :
Then go try the development version.
Also, when did this start happening?
-
Can you post up the image of the error message and anything that may help? I don't think I've ever received a message like that for any route/train load up.
But as the others said, try using the development version and see if it still happens.
-
I got the same issue also and I installed everything in its respective places
-
I got the same issue also and I installed everything in its respective places
It is a possibility that your computer is not powerful enough. Back before I got my graphics card replaced, I was getting that problem all the time on all routes. But now that I have a better one, I do not get it at all. What are your specs?
-
I believe the problem is not having enough memory, and that could be because your pc is not fast enough. Try searching the official openbve forums to see if anyone else has the same problem.
And about the MT4 route, I'm in the process of installing clocks and announcements to the line and I also re-arranged the stations. The first station is now Boro Hall while 86th & 125th have been removed.
-
(http://i.imgur.com/CycWf.png)
-
Are you going to have those (2), (5), and (6) lines up for download? Just asking, out of curiosity.
-
My Christmas Gift To BVEStation! 8)
(http://i.imgur.com/TLeYC.jpg)
Metro Transit (4) Line [Version 3]
DOWNLOAD (http://www.mediafire.com/?mu4okv1c4oocl92)
50 MB
-Install to your OpenBVE directory!
-
The (D) Line is required in order to run this route!
==METRO TRANSIT (4) LINE FOR OPENBVE==
~(4) New Lots Express~ (Day)
From Boro Hall to New Lots Avenue.
~(4) New Lots Local~ (Night)
From Boro Hall to New Lots Avenue via (3) local line.
~(4) Crown Heights Express~ (Day)
From Boro Hall to Crown Heights-Utica Avenue, school hours only.
~(5) New Lots Thru-Express~ (Afternoon)
From Boro Hall to New Lots Avenue via the (4) express line, rush hours only.
~(6) Weeknight G/O~ (Night)
From Boro Hall to New Lots via the (4) Express line.
~(2) New Lots Local~ (Day)
From Boro Hall to New Lots Avenue.
~(2) Crown Heights Local~ (Night)
From Boro Hall to Crown Heights-Utica Avenue.
~(3) Weekend G/O~ (Day)
From Kingston Ave to New Lots Avenue.
-
Your download is indicating that it was set as private.
-
Your download is indicating that it was set as private.
It should be working properly now.
-
Wow, that's a big package! I would totally make some videos, but I have been so busy lately, I just do not have time. Anyways, great routes, looking forward to more content!
-
Yes it does work. Thanks and great routes.
-
Awesome man gonna download this when i get back from school :D
-
My 2nd Christmas gift toBVEStation! 8)
(http://i.imgur.com/dUsbx.png)(http://i.imgur.com/Zqj0U.png)
R142 & R142A [2012 Preview]
DOWNLOAD R142 (http://www.mediafire.com/?4adxxx30sackap5)
13 MB
DOWNLOAD R142A (http://www.mediafire.com/?akmor1svr5oud91)
23 MB
-Install to your OpenBVE trains directory!
-
Wow this'll be great :) like always
-
Thanks guys.. I've started to study the creating addons section of the official openbve website and I managed to come up with this experimental 4 line route that uses the random syntax or ($RND).
Now you have 11 routes for your MT4 Line! ;)
Metro Transit (4) Evening Rush Hour (http://www.mediafire.com/?9zoj7on750gjp61)
-
great like always
-
For me, some of the signals didn't clear until I was about 10 feet in front of them..... also, it is virtually impossible for all 4 trains (3 AI trains, then one self operated) to terminate. There must be some sort of way to make one train terminate on one express track and another train to terminate on another express track...
-
great like always
Thanks!
For me, some of the signals didn't clear until I was about 10 feet in front of them..... also, it is virtually impossible for all 4 trains (3 AI trains, then one self operated) to terminate. There must be some sort of way to make one train terminate on one express track and another train to terminate on another express track...
It's impossible to have them all terminate and the 1 AI train in front does magic @ New Lots lol. As long as your train can terminate that's what matters for now.
I've removed a signal at Fulton Street that would allow you to enter while the train is still in the station. (wait for the train in front to fully leave the station before entering!) Also, there's now 11 files to choose from, the new ones being the 2nd to last (2) to New Lots & a slightly delayed (4) train.
Metro Transit (4) Evening Rush Hour (http://www.mediafire.com/?9zoj7on750gjp61)
-
The R142A download link (http://www.mediafire.com/download.php?lo6x3xdaunv3j9v) has been updated to include the (5) train!
-
(http://i.imgur.com/4TxZG.png)
Version 4 Released & includes 13 routes now!
DOWNLOAD (http://www.mediafire.com/download.php?2ceg5xevln1iag6)
-
Jesus, i need a new computer immediately None are for BVE?.
-
Interesting route! And now we can choice from various trains for use. Thanks! ;)
-
BTW - did anybody find some real picture of R179? I would like to make the page for it on my Virtual Depot, but I can't find anything on web...
-
BTW - did anybody find some real picture of R179? I would like to make the page for it on my Virtual Depot, but I can't find anything on web...
there is currently no pictures , or even official plans on how it will look like . The contract date for the order should take place sometime in the first quarter of 2012 , so we might get some info then . My guess is it will look similar to the current r160 .
-
Jesus, i need a new computer immediately None are for BVE?.
Go to the official Openbve website (http://trainsimframework.org/) and download the stable version. OpenBVE is optimized to run much faster than BVE 2 or BVE 4 ever could run. There's options available to make the game faster such as turning down the draw distance or motion blur.
Interesting route! And now we can choice from various trains for use. Thanks! ;)
Thanks! And as Mr. Railfan mentioned, the R179 is more likely than not to resemble the R160.
-
(http://i.imgur.com/4TxZG.png)
Version 4 Released & includes 13 routes now!
DOWNLOAD (http://www.mediafire.com/download.php?2ceg5xevln1iag6)
BTW love the route . Great Job!! ;D
-
This route is excellent work
Great job.
-
great job on the new lots route and the R142. really enjoyed them.
-
BTW love the route . Great Job!! ;D
Thanks Mr Railfan! I look forward to future updates and I hope you have a great holiday.
This route is excellent work
Great job.
Thanks R40R32! I'm glad you like it.
great job on the new lots route and the R142. really enjoyed them.
Thanks Manormortal! You'll really enjoy it when I get around to adding some cool features to the line. 8)
I hope everyone who downloads enjoys and all have a great holiday! :D
-
Some of the link said this message when i try to download it. Invalid or Deleted File.
The key you provided for file download was invalid. This is usually caused because the file is no longer stored on Mediafire. This occurs when the file is removed by the originating user or Mediafire.
Please fix this error thanks
-
Some of the link said this message when i try to download it. Invalid or Deleted File.
The key you provided for file download was invalid. This is usually caused because the file is no longer stored on Mediafire. This occurs when the file is removed by the originating user or Mediafire.
Please fix this error thanks
Happy holidays and thanks for letting me know! Mediafire has been giving me some problems lately so I am currently waiting for all downloads to be uploaded to the download section. Every now and then mediafire will be down or the links will give a false invalid or deleted file when it works. For now, you can use the BVE routes wiki download links for the R142/A & New Lots line.
-
SIR the route look good. Can it have TJay Signal Pack ;D
-
SIR do you think that you could upload the file that are having trouble on the same thread as this. Thanks :)
-
This is cool! 8)
-
Great work with what ur doing with it man =) Just wondering, but how much work would it be to smooth out the curves?
-
Are you trying to get it online on the BVEStation Downloads? If you are drop me an email, or a PM along with the file or link to the file and I'll put it up. The old submissions email rarely gets checked now.
-
Hey (SIR) are you also going to upload your R143 and R179 trainsets?
Also just so you know your older R142A trainset is still on the downloads section.
-
Nice job SIR! Could you look into the double red signalling system? It's extremely frustrating to abruptly see the train in front of you one red signal away. Maybe you could look into the signal coding, so you'll make it that there are two reds instead of one.
-
Is the R142,R142A,R143 going to have the CPStart,loop,end sound.
-
Is the R142,R142A,R143 going to have the CPStart,loop,end sound.
The R-142A doesn't really have a compressor sound they're really quiet some are loud in cases but with the A/C or and heat on there quiet unlike the Bom 142's which are loud as heck and the 143's that would be a good idea though having the HVAC's kick in randomly.
-
SIR May I use the R142A to Create a R142B-1.
Heres the Specs:
All the Same of the R142A expect Siemens Propulsion installed.
-
SIR, the link for the R142 and R142A is broken, or the file is deleted.