BVEStation Forums
BVE => NYCTA Projects => Topic started by: Mr Railfan on June 29, 2011, 09:54:42 pm
-
Ladies and Gentlemen I would Like to present to you yet another project im working on . Once again im most likely not going to be developing the train Interior / Exterior [I have a little too Much on my hands right now :P] so i will be focusing my attention on the panel instead .
I was going to merge this thread with my R160 Thread , but after looking at how different the cabs are and how much work would have to be put into this cab , i decided to create its own thread so i can post updates later on.
Heres the R160 Cab/Panel Thread if u didnt check it out yet:
http://forums.bvestation.com/index.php?topic=637.0 (http://forums.bvestation.com/index.php?topic=637.0)
Now as i promised here's the preview:
(http://i1141.photobucket.com/albums/n583/MrRailfan/R143/R143PanelPreview.jpg)
Tell me what you people think! 8)
Please Note: this is not the final version and it will be updated in the future.
-
Very Nice! I was wondering what showed up on that CBTC screen
-
omg take you train projects one at a time. lol. btw in my opinion the sunlight reflections in the cab are gonna look weird when its in the tunnel. also theres supposed to be 2 door light indicators, i only see one. but for a start it looks great!
-
omg take you train projects one at a time. lol. btw in my opinion the sunlight reflections in the cab are gonna look weird when its in the tunnel. also theres supposed to be 2 door light indicators, i only see one. but for a start it looks great!
Well if your going to operate this on an upto-date route then the cabin will dim when entering a tunnel and there will be no Light blemishes .Only the Door indicators , screens and Speedometer will be lit up. Also what do you mean 2 door indicators? theres one at the top left of the panel which shows that the doors are Closed and Locked , and the Left an Right Door Indicators on the Bottom ,BTW All of them have been animated already 8).
-
Good Job
-
omg take you train projects one at a time. lol. btw in my opinion the sunlight reflections in the cab are gonna look weird when its in the tunnel. also theres supposed to be 2 door light indicators, i only see one. but for a start it looks great!
From Mr Railfan's preview of the cab, I see the "Doors Closed & Locked", and the two door enablers. Those are two right there. But if you're talking about when the duplex air gauge lights up as indication, that's another story.
-
im talking about those green light things, like in this video
Riding New York City Subway R143 L Train On CBTC Part One (http://www.youtube.com/watch?v=VNSsFnfJCUo#)
-
im talking about those green light things, like in this video
Riding New York City Subway R143 L Train On CBTC Part One (http://www.youtube.com/watch?v=VNSsFnfJCUo#)
You mean the one in that w/e you call it above the #8200?
-
yes
-
That isn't indication or a code box. That's the built-in train radio. There is a solid green light on RADIO when it is on. When the PA is activated, another green light on there will be flashing green on the PA spot.
-
Ehh I didn't know what else to call it lol
-
Ladies and Gentleman I would Like to present to you yet another project im working on . Once again im most likely not going to be developing the train Interior / Exterior [I have a little too Much on my hands right now :P] so i will be focusing my attention on the panel instead .
I was going to merge this thread with my R160 Thread , but after looking at how different the cabs are and how much work would have to be put into this cab , i decided to create its own thread so i can post updates later on.
Heres the R160 Cab/Panel Thread if u didnt check it out yet:
http://forums.bvestation.com/index.php?topic=637.0 (http://forums.bvestation.com/index.php?topic=637.0)
Now as i promised here's the preview:
(http://i1141.photobucket.com/albums/n583/MrRailfan/R143/R143PanelPreview.jpg)
Tell me what you people think! 8)
Please Note: this is not the final version and it will be updated in the future.
Mr. Railfan would you like to put this on my R143
-
Ladies and Gentleman I would Like to present to you yet another project im working on . Once again im most likely not going to be developing the train Interior / Exterior [I have a little too Much on my hands right now :P] so i will be focusing my attention on the panel instead .
I was going to merge this thread with my R160 Thread , but after looking at how different the cabs are and how much work would have to be put into this cab , i decided to create its own thread so i can post updates later on.
Heres the R160 Cab/Panel Thread if u didnt check it out yet:
http://forums.bvestation.com/index.php?topic=637.0 (http://forums.bvestation.com/index.php?topic=637.0)
Now as i promised here's the preview:
(http://i1141.photobucket.com/albums/n583/MrRailfan/R143/R143PanelPreview.jpg)
Tell me what you people think! 8)
Please Note: this is not the final version and it will be updated in the future.
BStyles would you like to put this on my R143
what does Bstyles have to do with my R143 cab? And if u want to use it then my answer is no. Until you prove that you know what you are doing im not giving you permission to use my cab.
-
BStyles would you like to put this on my R143
You must not have heard then...
-
Ladies and Gentleman I would Like to present to you yet another project im working on . Once again im most likely not going to be developing the train Interior / Exterior [I have a little too Much on my hands right now :P] so i will be focusing my attention on the panel instead .
I was going to merge this thread with my R160 Thread , but after looking at how different the cabs are and how much work would have to be put into this cab , i decided to create its own thread so i can post updates later on.
Heres the R160 Cab/Panel Thread if u didnt check it out yet:
http://forums.bvestation.com/index.php?topic=637.0 (http://forums.bvestation.com/index.php?topic=637.0)
Now as i promised here's the preview:
(http://i1141.photobucket.com/albums/n583/MrRailfan/R143/R143PanelPreview.jpg)
Tell me what you people think! 8)
Please Note: this is not the final version and it will be updated in the future.
BStyles would you like to put this on my R143
??? You said my R143, if your making your own R143 you should make a panel/cab on your own instead of using someone elses.
-
Mr.Railfan is it possible for you to work with SIR North Shore with this. His R143 sounds amazing and your cab looks equally as good.
-
Great job but are you going to add the controller
-
Great job but are you going to add the controller
He said in his R160 panel thread that the controller is not seen by the driver in reality, because he is looking ahead, not at the controller, so I doubt it.
-
Mr. Railfan I need a panel for my R143 and I really like yours and BStyles but i need to choose one
-
Its been a while since i posted any updates here but i would like to assure you im making progress . The cab is 98% done [a few cosmetic changes might be added] , so i decided to post a preview video of the train in action.
R143 Preview - J train [Fulton St to Broad St Layup] (OpenBVE) (http://www.youtube.com/watch?v=UOD-atLnjiY#)
I spent alot of time updating and animating the cab so feedback is always welcomed! Also make sure to subscribe to my youtube channel as it motivates me to create more video and continue my work 8),Plus you get to see new videos first hand before i post them in the the forums .
-
Nice work! This R143 is going to be great! By the way, the speed is going to show on the speedometer too right, not just the CBTC screen.
-
Nice work! This R143 is going to be great! By the way, the speed is going to show on the speedometer too right, not just the CBTC screen.
there will be two versions
with CBTC screen and without
in real life when the CBTC screen is on the Speedo does not work , so in the version without the Left screen the speedo will work like on the 160.
-
As with the R68 and R160 cabs, this one is also quite magnificent. Can't wait for the release.
-
Looking good :D
-
Wow.this just leaves me speechless. Words can't describe how good your work is. If you do anything else the panel might just pop out of the screen lol :P
-
Wow, that looks great! 8)
-
R143 - M train via 63st [F line] and 6 ave Express with Announcements and timers (http://www.youtube.com/watch?v=whaURcvubJM#)
Enjoy, I spent some time updating the 6th avenue line with timers , announcements and brightness command .
-
Looks fantastic, I've tried to play around with the signals for other routes and the BVE coding is still a blur to me.
-
Hey Mr Railfan can u do a vid of the main of the R143 the L train ;D
-
Are there really timers btwn Bway and W4th? I remember nearly every T/O taking that switch hard at least 25 at most 32.Nice vid!
-
thats after the t/o clears the timer.
-
Hey Mr Railfan can u do a vid of the main of the R143 the L train ;D
Sure , i was planing on making a video of the L once i Finnish the usual update i do to the route before i record a video . Im probably gonna record a vid showing the ATO feature i implemented into the train .
Are there really timers btwn Bway and W4th? I remember nearly every T/O taking that switch hard at least 25 at most 32.Nice vid!
Yea there are always timers there but they clear at 20-25 so thats why they hit it hard
-
Hey guys whats the progress on this?
-
Hey guys whats the progress on this?
Cab is done , waiting for the Updated 160 exterior to be finished and converted to the 143.
-
Cab is done , waiting for the Updated 160 exterior to be finished and converted to the 143.
Shouldn't be much of a conversion though.
If I were you, I would just use the updated R160 exterior and change the position of the flag on the front.
-
Shouldn't be much of a conversion though.
If I were you, I would just use the updated R160 exterior and change the position of the flag on the front.
There's more to it than that.
The bonnet shapes are slightly different, and there are many major differences in the interior.
-
There's more to it than that.
The bonnet shapes are slightly different, and there are many major differences in the interior.
Ok, I am going to guess that you are making a high detailed R143.
Good luck!!! 8)
-
Ok, I am going to guess that you are making a high detailed R143.
Good luck!!! 8)
No he Isn't Someone else is working on the R143.
-
No he Isn't Someone else is working on the R143.
I meant you as in you guys.
But what the hell good luck to whoever is.
-
Continued development has been moved to this thread: http://forums.bvestation.com/index.php?topic=2545.0 (http://forums.bvestation.com/index.php?topic=2545.0)
BStyles