BVEStation

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Fan Railer

Pages: 1 ... 3 4 5 [6] 7 8 9 ... 60
76
Train Simulator 2016 / TS2015: Nickel Plate Road 765
« on: August 28, 2015, 10:08:46 am »
All mods applied to NKP 765 here can be downloaded over at Railworks America:
[youtube]http://www.youtube.com/watch?v=hWgyvkXXb9U[/youtube]

77
[youtube]http://www.youtube.com/watch?v=FDIrA67SO9k[/youtube]

Acela and HHP-8 Mod Packs updated with Alstom AC Traction Motor sounds. Read the readme.txt files for more information:

HHP-8:
http://www.mediafire.com/download/735q7xo5jra7r1t/TS2015_Bombardier_HHP-8_Physics_Mod_Pack.rar

Acela Express:
http://www.mediafire.com/download/tnciq4mt7jdk1m8/TS2015_Amtrak_Acela_Express_Physics_%26_Sound_Mod_Update.rar

78
Ever want to remanufacture your virtual AEM-7DC? Well, now you can lol:
[youtube]http://www.youtube.com/watch?v=dNc86SNtFZo[/youtube]

This is the Amtrak EMD AEM-7AC & DC Physics and Sound Upgrade pack, TS2015 edition.

In order to utilize this freeware physics & sound upgrade, you must have purchased the Northeast Corridor Add-On pack available at Steam: http://store.steampowered.com/app/65232/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the physics & sound enhancements found in this pack for personal use if you so choose.

The purpose of this pack is to correct some physics errors in the original AEM-7, correct the coupler spacing issue with the Amfleet cars in version 48.9a of TS2015, and add new horn and bell sounds.
THIS UPDATE adds AEM-7AC physics and sounds (and number restrictions). Read the "owner's manual" section for instructions on how to switch between the two physics sets.
AEM-7AC sound development was facilitated by this video:
[youtube]http://www.youtube.com/watch?v=L1N-efaS6A8[/youtube]

Sound portion information:
On popular request, this pack comes with two (now three) bell sounds (low pitch and high pitch), both recorded directly off of AEM-7DC units, in addition to the K5LA (which comes with exterior and in-cab loops).
Read the "owner's manual" section for instructions on how to switch between the two different bell sounds.

NOTE: The interior E-bell sound is VERY soft, so if you don't hear it unless you're trying or the volume is up, that's normal.

Physics Parameter Change Log (DC Unit):
1. Adjusted tractive effort and braking effort curves based on real world figures available online: http://www2.hcmuaf.edu.vn/data/phamducdung/thamkhao/Mark's%20Standard-Handbook/Transportation.pdf
2. Adjusted maximum amperage ratings; 2250 for traction and 970 for braking. Traction amps based here: http://i324.photobucket.com/albums/k329/mestevet/01671s11Kvsm.jpg

For more specifics on the specific values that were changed, proceed here: http://railworksamerica.com/forum/viewtopic.php?f=31&t=10793

Physics Parameter Change Log (AC Unit):
1. Adjusted tractive effort curve based on real world figures available online: http://www.sonic.net/~mly/Caltrain-Electrification/2000-08-Rolling-Stock-Draft/a7.pdf
2. Adjusted maximum amperage ratings; 517 for traction and 340 for braking. 517 amps = 51,700 lbs TE; -340 amps = 34,000 lbs dynamic brake effort

Technical specifications:

1. EMD AEM-7DC (7000 THP)
   a. Starting tractive effort of 65,000 lbs (289.1344 kN)
   b. Continuous tractive effort of 45,000 lbs (200 kN) @ 64 mph
   c. Dynamic Brake effort of 15,600 lbs (70 kN) @ 36 mph
   d. Wheel horsepower of 7,600 hp (5,672 kW) @ 65 mph; fade to 5,000 hp (3,731 kW) @ 125 mph
   e. Maximum speed of 125 mph
   i. Weight = 202,823.2 lbs (92 metric tons)
   k. Max traction amps = 2250
   l. Max brake amps = 970

2. EMD / Alstom AEM-7AC (7000 THP)
   a. Starting tractive effort of 51,700 lbs (230 kN) @ 0 mph - 43 mph
   b. Continuous tractive effort of 38,240 lbs (170.1 kN) @ 65 mph
   c. Dynamic Brake effort of 34,000 lbs (177.93 kN) @ 64.5 mph - 18 mph; fade to 0 lbs @ 13.5 mph
   d. Wheel horsepower of 6,834 hp (5,100 kW) @ 65 mph - 125 mph
   e. Maximum speed of 125 mph
   i. Weight = 202,823.2 lbs (92 metric tons)
   k. Max traction amps = 517
   l. Max brake amps = ~340 (@ 90% auto brake handle)

IMPORTANT; Install Instructions

1. Open the Northeast Corridor asset pack until the directory reads "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\NorthEastCorridor"
2. Then open the "Railworks_AEM-7DC_Physics_&_Sound_Mod_Update.rar" file.
3. Drag all file folders from the .rar file and into the directory you opened in step one.
4. Overwrite if asked.
5. The installation should be complete. Run TS2015 to check.

OWNER'S MANUAL:
Once installation is complete, the default bell that is being used is the e-bell. In order to change the bell that is used, follow the instructions below:
1a. Open folders until directory reads "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\NorthEastCorridor\Audio\RailVehicles\Electric\AEM-7\Cab"
1b. You will see three folders; "High Bell", "Low Bell", and "E-bell"
2. Open the respective folder that contains the horn.proxyxml bell you want to use and copy the file (CTRL + C).
3. Proceed back to the directory from step 1a.
4. Paste the selected file (CTRL + V); overwrite when prompted
5. Bell swap should be complete. Run TS2015 to confirm.

Once installation is complete, pack defaults to AEM-7AC physics. In order to swap physics, follow the instructions below:
1a. Open folders until directory reads "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\NorthEastCorridor\RailVehicles\Electric\AEM7\Default\Simulation"
1b. You will see two folders; "AC" & "DC"
2. Open the respective folder that contains the physics set you want to use and copy the files within (CTRL + C).
3. Proceed back to the directory from step 1a.
4. Paste the selected files (CTRL + V); overwrite when prompted
5. Physics swap should be complete. Run TS2015 to confirm.

Once installation is complete, the pack defaults to choosing only the AEM-7AC numbers. In order to change the numbers that are used, follow the instructions below:
1a. Open folders until directory reads "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\NorthEastCorridor\RailVehicles\Electric\AEM7\Default\Engine"
1b. You will see two folders; "AC" & "DC"
2. Open the respective folder that contains the .dcsv file you want to use and copy the file within (CTRL + C).
3. Proceed back to the directory from step 1a.
4. Paste the selected file (CTRL + V); overwrite when prompted
5. Bell swap should be complete. Run TS2015 to confirm.

Thank you for downloading and installing.
Enjoy =)

Download here: http://www.mediafire.com/download/n5ujt0juvljxutu/TS2015_EMD_AEM-7AC_%26_DC_Physics_%26_Sound_Mod_Update.rar

79
Train Simulator 2016 / TS2015: Metra BNSF Racetrack Career Scenarios
« on: August 23, 2015, 09:13:11 am »
Metra Career Scenarios with mods applied:

Real Time Versions:
[youtube]http://www.youtube.com/watch?v=cIKgBOk-AqU[/youtube]
[youtube]http://www.youtube.com/watch?v=uMfjccXE4Go[/youtube]
[youtube]http://www.youtube.com/watch?v=cRxnk9m7v38[/youtube]
[youtube]http://www.youtube.com/watch?v=_TZM1dRgGp4[/youtube]

Time-lapse Versions:
[youtube]http://www.youtube.com/watch?v=DNoB2TfPjo8[/youtube]
[youtube]http://www.youtube.com/watch?v=e4jKJXnZ8KE[/youtube]
[youtube]http://www.youtube.com/watch?v=ye0x9Vp2AeY[/youtube]
[youtube]http://www.youtube.com/watch?v=OTdZKahniLw[/youtube]

80
[youtube]http://www.youtube.com/watch?v=roeEOhJKgQA[/youtube]
This is the Chicago & Southwest Productions Metra EMD F40PH-3 Locomotive & Nippon Sharyo Gallery Cab Car Bell & Door Sound Mod Pack V1.0.

In order to utilize this freeware physics upgrade, you must have purchased the "The Racetrack: Aurora - Chicago Route Add-On" pack available at Steam: http://store.steampowered.com/app/258648/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the bell sound enhancements found in this pack for personal use if you so choose.

THIS IS NOT A PHYSICS UPGRADE PACK. Physics mod is available separately (http://www.youtube.com/watch?v=mCddnGgME_Q).

The main purpose of this pack is to replace the mediocre stock bell sounds with authentic bell sounds (exterior and interior versions) for both the cab car and the locomotive.

This pack also replaces the door sounds (audible only while in the cab car at the moment). Sounds sourced to Tyler Johnston.


IMPORTANT; Install Instructions:

1. Locate BNSFChicago (C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\Barnez\BNSFChicago)
2. Open TS2015_Metra_EMD_F40PH_&_Gallery_Cab_Car_Bell_&_Door_Mod_Pack.7z
3. Drag the file folder from the .rar in step 2 into the directory you opened in step 1.
4. The installation should be complete. Run TS2015 to check.
5. If installation is botched or does not work, to back up to original files, delete the folder from step 3. Then proceed to contact me and let me know so I can fix the issue.

Thank you for downloading and installing.
Enjoy =)

Download here: http://www.mediafire.com/download/wll73d4ggz7c0am/Barnez_TS2015_Metra_EMD_F40PH_%26_Gallery_Cab_Car_Bell_%26_Door_Mod_Pack.rar

81
[youtube]http://www.youtube.com/watch?v=mCddnGgME_Q[/youtube]
This is the Chicago & Southwest Productions Metra EMD F40PH-3 Locomotive & Nippon Sharyo Gallery Cab Car Physics Modification pack version 1.0

In order to utilize this freeware physics upgrade, you must have purchased the "The Racetrack: Aurora - Chicago Route Add-On" pack available at Steam: http://store.steampowered.com/app/258648/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the physics enhancements found in this pack for personal use if you so choose.

This is NOT a mod pack. That full mod pack MAY be available separately from this one in the future once I have acquired sounds. Stay tuned.

The purpose of this pack is to adjust the physics performance of the EMD F40PH-3 locomotive and the associated Gallery Cab Car.

SIDE NOTE: To obtain Metra logo and decals for rolling stock, download this pack: http://railworksamerica.com/index.php/download-library/accessories?view=document&id=1858:metra-signage-logos&catid=24:accessories (http://www.facebook.com/groups/720469151375805/files/)

List of general changes; specific changes for each specific locomotive located below:
1. Modified tractive effort and braking effort curves.
2. Modified power ratings @ alternator and @ wheel.
3. Modified cab car fuel capacity.
4. Removed coupler slack.
5. Changed brake pipe normal pressure from 90 PSI to 110 PSI. Actual Metra equipment runs with 90 PSI in the brake pipe, but the game engine runs the brake gauges a little better if the pressure is set to 110 PSI. In addition, there is an issue with custom built consists with the cab leading not taking power if the brake pipe is set to 90 PSI. A future edition of this physics mod will be released to correct this problem; at which time, we will revert back to using the 90 PSI brake pipe.
6. Modified the cab car so that it does not provide tractive effort to the train set; only the locomotive applies tractive effort after the installation of this mod.
7. Adjusted cab car HUD ammeter upper limit from 1500 to 1800.

Version 2.0 of this mod will include a signature JohnS brake fix that will correct the air gauge functionality and allow a return back to the prototypical 90 PSI brake pipe rating.

NOTE: Although the F40PH-3 locomotive comes default with a neat HEP mode toggle ability, this only affects engine RPM; tractive power is not affected, so I have included two sets of physics that the user can switch between. Specifics are listed below for each set of physics. Instructions on how to perform the switch are included in the owner's manual, also located below.

Technical specifications:

1. EMD F40PH-2 (EMD 645; 3200 THP; no HEP)
   a. Starting tractive effort of 65,000 lbs (289.1344 kN)
   b. Continuous tractive effort of 38,240 lbs (170.1 kN) @ 16.31 mph
   c. Dynamic Brake effort of 35,000 lbs (177.93 kN) @ 55 mph; extended range sawtooth curve between 55 mph and 36 mph. Fade to 0 lbs @ 0.5 mph (not in use)
   d. Wheel horsepower of 2,850 hp (2,390 kW) @ 30 mph
   e. Maximum speed of 103 mph
    f. Engine RPM range = 410 - 900
   g. RPM change rate (rpm/second) = 18
    h. Fuel consumption range (gph)= 4 - 155
   i. Weight = 260,142.8 lbs (118 metric tons)
   j. Fuel capacity = 1500 gallons
   k. Max traction amps = 1785
   l. Max brake amps = 700 (not in use)

2. EMD F40PH-2 (EMD 645; 3200 THP; 500 kW HEP [7 - 11 cars])
   a. Starting tractive effort of 65,000 lbs (289.1344 kN)
   b. Continuous tractive effort of 38,240 lbs (170.1 kN) @ 16.31 mph
   c. Dynamic Brake effort of 35,000 lbs (177.93 kN) @ 55 mph; extended range sawtooth curve between 55 mph and 36 mph. Fade to 0 lbs @ 0.5 mph (not in use)
   d. Wheel horsepower of 2,210 hp (2,390 kW) @ 22 mph
   e. Maximum speed of 103 mph
    f. Engine RPM range = 410 - 900
   g. RPM change rate (rpm/second) = 18
    h. Fuel consumption range (gph)= 24 - 155
   i. Weight = 260,142.8 lbs (118 metric tons)
   j. Fuel capacity = 1500 gallons
   k. Max traction amps = 1785
   l. Max brake amps = 700 (not in use)

NOTE: Because of they way the game engine works, subbing in these real world values does result in slower high end acceleration. Run the locomotive with the non-HEP physics if it bothers you that you can't make it to track speed.

IMPORTANT; Install Instructions:

1. Locate BNSFChicago (C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\Barnez\BNSFChicago)
2. Open TS2015_Metra_EMD_F40PH_&_Gallery_Cab_Car_Physics_Mod_Pack.7z
3. Drag the file folder from the .rar in step 2 into the directory you opened in step 1.
4. The installation should be complete. Run TS2015 to check.
5. If installation is botched or does not work, to back up to original files, delete the folder from step 3.

Owner's Manual:
Once installation is complete, the pack defaults to using the non-HEP locomotive's traction physics. In order to switch between the HEP and non-HEP locomotive physics, follow the steps below:

1. Locate the following two directories:
1a. C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\Barnez\BNSFChicago\RailVehicles\Diesel\F40PH\Chicago
1b. C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\Barnez\BNSFChicago\RailVehicles\Passenger\NSbilevel\NSCabCoach\Engine
2. Within each of the two above directories, you will see two more folders labelled "HEP+" (HEP version) and "HEP-" (non-HEP version).
3. Once you've chosen which version of physics you want to run with, enter the respective folder, copy the contents inside, return to the previous directory, and paste the contents that you copied. Overwrite when asked.
4. Physics set swap should be complete; run TS2015 to confirm.
5. Expert users can run multiple physics sets at the same time if they choose. The key is to make one locomotive (driver) a HEP locomotive, and the other (no driver) a non-HEP locomotive. I'll let these expert users figure out how to do that.

NOTE: When trying to run a career scenario after installing any physics mod, you will have to bypass the "track.bin" error message that pops up by pressing "F2", then hitting save. The scenario will then be playable.

Thank you for downloading and installing.
Enjoy =)

Download here: http://www.mediafire.com/download/e3bu04itvkh7w13/Barnez_TS2015_Metra_EMD_F40PH_%26_Gallery_Cab_Car_Physics_Mod_Pack.rar

82
Took old run sounds and subbed them into the pre-existing R68 for this minor mod-train:
[youtube]http://www.youtube.com/watch?v=bsnmvP1CwZg[/youtube]
It's available on my mediafire page (link in the video description on YouTube), and will be made available locally soon (http://www.bvestation.com/download/136).
Enjoy =)

83
Very cool, how did you get there?
I drove. The weekend transit connections up there are horrendously sparse lol.

85
[youtube]http://www.youtube.com/watch?v=07yihJmU-HA[/youtube]
So today  (7/18/15), I had the chance to visit the Shore Line Trolley Museum up in Branford, CT for the first time. Here, I show you the operation of R9 1689. This is my first time operating, so cut me a little slack if not every aspect is perfect. The video is a little long, so I will give you some time markers below. We manage to hit 25 mph on the return trip on one of the straightaways before the yard limit, but the track quality lends to a lot of truck hunting at that speed. I really do suggest that if you have the time and money, that you try this out. It really is a fun experience and you do learn a lot. Enjoy the ride =)

Table of Contents (can you find my "Shave and a Haircut"s):
0:00 - 13:00 (shunting out of the yard and setting switches)
13:00 - 20:00 (outbound run)
21:00 - 38:10 (inbound run with pole directional changes and switch setting; we top 25 MPH on the straight section of track just before the yard limit).

The remainder of the video is RFW footage. Only the outbound trip ended up being viewable, as the camera on the second iPhone ended up screwing up the focus setting, but I have kept the inbound RFW footage for the audio factor. Credits to my mother and father for shooting this footage while I operated. Enjoy =)

One thing to note on the R9 at least is that inserting the B2 pin will decrease brake response/application times dramatically. Notice how for most of the run, I have the brake in the service application position for a good bit of time before the brakes start to grab, but as soon as Lou inserts the B2 pin, 1.5 seconds in the service application detente is enough to bring the train to a jarring halt.

[youtube]http://www.youtube.com/watch?v=byXvyRRC3Jk[/youtube]

Rest of the videos from this day: http://www.youtube.com/playlist?list=PLWcHmTMSV7mifCon80vNxKPQC8azrqqs8

86
Transit / PATCO Speedline Action (7/15/15) [Photos & Videos]
« on: July 17, 2015, 11:31:33 am »
My first time on PATCO. Very nice system; very railfan friendly:

Exterior Clips:
[youtube]http://www.youtube.com/watch?v=mWNPn7bBXMY[/youtube]
[youtube]http://www.youtube.com/watch?v=qZVkhrRbwXc[/youtube]

Railfan Window Round Trip Rides (real time and time lapse versions):
[youtube]http://www.youtube.com/watch?v=2b1LLCXN7X8[/youtube]
[youtube]http://www.youtube.com/watch?v=VwPjkFomfRE[/youtube]
[youtube]http://www.youtube.com/watch?v=M4LPEvMjnXY[/youtube]

Entire PATCO playlist:
http://www.youtube.com/playlist?list=PLWcHmTMSV7mil8CV_5crZMGLLBxCAfsN3

Photos from that day (includes other transit systems):
http://www.facebook.com/media/set/?set=a.997125950339356.1073741885.100001258801227&type=1&l=33a5f4a39e

87
Other Projects / OpenBVE Metro-North Danbury Branch
« on: July 14, 2015, 05:14:17 am »
[youtube]http://www.youtube.com/watch?v=OMgq-kXvGIk[/youtube]
[youtube]http://www.youtube.com/watch?v=0MLwpcGLGEc[/youtube]

For now, the route and updated train can only be downloaded from the following link (need to join the FB group to download): https://www.facebook.com/groups/ITEAofficial/?fref=nf

Enjoy and stay tuned for more =)

89
Both can be found on Just Trains. Enjoy and stay tuned for more:
[youtube]http://www.youtube.com/watch?v=GdMud6kcnH8[/youtube]

90
Showcasing the difference between restricted acceleration and unrestricted acceleration on the R143:

Restricted (manual operation):


Unrestricted (CBTC / ATO):


L Train CBTC / ATO acceleration and 26 TPH headways:
[youtube]http://www.youtube.com/watch?v=-4EWwmMWKZM[/youtube]

Pages: 1 ... 3 4 5 [6] 7 8 9 ... 60