BVEStation Forums

BVE => NYCTA Projects => Topic started by: ??????????????? on March 04, 2012, 04:36:12 pm

Title: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on March 04, 2012, 04:36:12 pm
This train has been released!

LINK:
http://www.bvestation.com/downloadinfo.php?id=58 (http://www.bvestation.com/downloadinfo.php?id=58)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 04, 2012, 04:37:11 pm
Preview:
OpenBVE - R32's interior and exterior part two (http://www.youtube.com/watch?v=SMZjhiT3wMU#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Fox-179 on March 04, 2012, 04:58:31 pm
I checked it out.
Things that are fine and don't need to be changed or just minor fixes are:
Interior(floors,seats and textures are great but the wall texture can be retaken for higher quality) it looks like a paint(program) texture.
Possibly an actual gate texture for the R-32 which can be taken from an R-62/A,42 or 32.

Things that need to be fixed are:
the doors obviously(texture and they close too fast)
higher quality exterior for the front and side(looks very cartoonish)
new logo
underbody work
sounds and a cab.(very important).

I would rate this BETA as a 5 out of 10
Interior is near perfect except for the wall texture and possibly ads also rollsign that can be a bit more realistic.
Everything else is very low quality(exterior) theres no cab and no sounds.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 04, 2012, 05:03:07 pm
This exterior is great! But there is some stuff which could be better. Like Fox-179 said, it should have some more and better photorealistic textures (Possibly for the floor, exterior gates, interior walls, etc). Otherwise it is great! This exterior could go onto Error's new R32 possibly
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 04, 2012, 05:16:47 pm
I know i am new person on bvestation. I am trying doing my best.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: peacemak3r on March 04, 2012, 05:27:09 pm
It looks good.

I personally don't see the cartoonish exterior Fox-179 was talking about.  It looks like a photo that's just compacted and resized smaller in my opinion.

Also the doors closing too fast?  Either I'm high or it's the other way around.  The doors are closing too slow for me.  It's opening faster then usual though.

The door texture, I figure you just used the same photo as the R32 exterior because that's what it looks like for me.  I'd say the doors look out of wack is because I'll assume the exterior photo was resized smaller then the original thus making that door texture look fuzzy.

Interior is puzzling me.  Some parts looks as if you took a picture of it, where other parts look like it was made from paint.  Either I'm just getting a headache from this Java project I'm working for class or it is was I stated.

Other then that I like it.  Obviously missing a cab and sounds but it's BETA so I'm not complaining.

I don't normally rate BETA's because there is no point.  It's going to change regardless.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 04, 2012, 05:28:23 pm
I know i am new person on bvestation. I am trying doing my best.
this was a pretty good train to start with, now you just have to improve the quality. if you need a cab or the basic train to place the exterior in, just ask around im sure theres developers here that would be wiling to help you out with the amount of work that you put in. the thing that i saw that really needed improving was the Nose. But in any view i thought it was pretty reasonable since its the frist released R32 we have of this kind.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 04, 2012, 05:30:20 pm
Also the doors closing too fast?  Either I'm high or it's the other way around.
ROFLMAO
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 04, 2012, 05:34:10 pm
It looks good.

I personally don't see the cartoonish exterior Fox-179 was talking about.  It looks like a photo that's just compacted and resized smaller in my opinion.

Also the doors closing too fast?  Either I'm high or it's the other way around.  The doors are closing too slow for me.  It's opening faster then usual though.

The door texture, I figure you just used the same photo as the R32 exterior because that's what it looks like for me.  I'd say the doors look out of wack is because I'll assume the exterior photo was resized smaller then the original thus making that door texture look fuzzy.

Interior is puzzling me.  Some parts looks as if you took a picture of it, where other parts look like it was made from paint.  Either I'm just getting a headache from this Java project I'm working for class or it is was I stated.

Other then that I like it.  Obviously missing a cab and sounds but it's BETA so I'm not complaining.

I don't normally rate BETA's because there is no point.  It's going to change regardless.

i know my first project isn't improvement yet. Later, my project will be more improvement

You can add cab and sounds from straphanger32's R32
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 04, 2012, 05:50:34 pm
Also the doors closing too fast?  Either I'm high or it's the other way around.
ROFLMAO

It is the other way around for me too, but I put it onto Straphanger32's R32. Whether the doors close too fast or not depends on which train you put the exterior onto. But you can always trim the door closing sound in Audacity to be made shorter (Removing the short "post-closure" noise that is commonly found in the Doorcls.wav of many trains), so it is more realistic when the doors close.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 04, 2012, 07:02:39 pm
oo ok thank u guys for checked my project out and telling me so lemme fix them again.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ErrorMacro11 on March 04, 2012, 08:17:46 pm
really good
but needs
- Ability to change rollsigns
- a panel
and a cab
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 04, 2012, 08:29:26 pm
really good
but needs
- Ability to change rollsigns
- a panel
and a cab

Ehh, panel and cab is the same thing...
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: alanr179 on March 04, 2012, 08:49:18 pm
how do I change the rollsign from the h to the a
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Slants4Lyfe on March 04, 2012, 09:17:05 pm
Hey Mudwrestle, PM me when you get a chance.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 04, 2012, 09:23:27 pm
how do I change the rollsign from the h to the a

Use Paint.NET
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 06, 2012, 06:49:41 am
Yesterday, i took some photos of r32's interior

http://smhnoob.webs.com/1.jpg (http://smhnoob.webs.com/1.jpg)

http://smhnoob.webs.com/12.jpg (http://smhnoob.webs.com/12.jpg)

http://smhnoob.webs.com/13.jpg (http://smhnoob.webs.com/13.jpg)

http://smhnoob.webs.com/14.jpg (http://smhnoob.webs.com/14.jpg)

http://smhnoob.webs.com/2.jpg (http://smhnoob.webs.com/2.jpg)

http://smhnoob.webs.com/3.jpg (http://smhnoob.webs.com/3.jpg)

http://smhnoob.webs.com/7.jpg (http://smhnoob.webs.com/7.jpg)

http://smhnoob.webs.com/9.jpg (http://smhnoob.webs.com/9.jpg)

http://smhnoob.webs.com/4.jpg (http://smhnoob.webs.com/4.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 06, 2012, 07:37:39 am
do i need take more photos of r32's interior or look enough to you?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 06, 2012, 10:13:13 am
Tell me what do u think?

(http://smhnoob.webs.com/IMG2.jpeg)

(http://smhnoob.webs.com/R32InteriorUpdated.jpeg)

i know my r32's exterior doors arent pretty i gotta to take photo of them again
(http://smhnoob.webs.com/IMG3.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: peacemak3r on March 06, 2012, 11:08:10 am
I feel like the seats are too large now and too high up.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ErrorMacro11 on March 06, 2012, 11:39:57 am
mo only suggestions are to add anomated rollsigns, and for the door problem, combine textures for the door and the train
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 06, 2012, 02:06:34 pm
Tell me what do u think?

(http://smhnoob.webs.com/IMG2.jpeg)

(http://smhnoob.webs.com/R32InteriorUpdated.jpeg)

i know my r32's exterior doors arent pretty i gotta to take photo of them again
(http://smhnoob.webs.com/IMG3.jpeg)

That looks great! But you should use new photorealistic seats instead of the ones from the R38, just a suggestion.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 06, 2012, 02:24:26 pm
alright, i can send you a R32 nose tonight if youi would like
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ErrorMacro11 on March 06, 2012, 02:45:53 pm
why dont you use your R32 seats. they were great
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 06, 2012, 06:03:27 pm
but i borrow that. i hold my old seats
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ErrorMacro11 on March 06, 2012, 06:12:29 pm
your train is nearly perfect in eyes, just keep your R32 Seats, add rollsigns, and your train will be perfect
as for the doors
make them the same color as the train
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 06, 2012, 06:25:29 pm
yea i know but i forget tell yall that my r32s exteriors width were resized.

BEFORE: (http://smhnoob.webs.com/before.jpeg)

AFTER: (http://smhnoob.webs.com/After.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 06, 2012, 06:33:57 pm
This exterior is DEFINITELY worthy to go on Error46146's new R32 in development indeed.  ;)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 06, 2012, 09:08:19 pm
Updated..

(http://smhnoob.webs.com/Updated.jpeg)

(http://smhnoob.webs.com/Updated2.jpeg)

(http://smhnoob.webs.com/Updated3.jpeg)

(http://smhnoob.webs.com/Updated4.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Train man on March 06, 2012, 09:27:28 pm
Wow. That looks amazing!!!  :D
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 06, 2012, 09:38:47 pm
Now all it needs is some photorealism on the ceiling, and possibly the removal of those black lines on the edges of the poles and windows (Textures) to make it more visually appealing, and then it will be perfect!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 06, 2012, 09:53:27 pm
yea thats wat i thought but im trying because there are people in cars :|
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Mr Railfan on March 06, 2012, 10:13:33 pm
yea thats wat i thought but im trying because there are people in cars :|

get texture shots at terminals , i might have a few texture shots i took that i might help out with.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 06, 2012, 11:08:45 pm
yea railfan i did
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 07, 2012, 08:58:56 am
I made r32's curve roof but i dont remember where did i put middle roof in b3ds. :\

(http://smhnoob.webs.com/CurveRoof.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 07, 2012, 10:37:46 am
Updated....

(http://smhnoob.webs.com/R32Curve2.jpeg)

(http://smhnoob.webs.com/R32Curve1.jpeg)

hmm do u have good r32's roof for me?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 07, 2012, 10:59:24 am
Umm i change my r32's back & front skin

(http://smhnoob.webs.com/R32Curve3.jpeg)

(http://smhnoob.webs.com/R32Curve4.jpeg)

is this better or no?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ErrorMacro11 on March 07, 2012, 10:59:48 am
98% perfect
love the curved roof
only minus is the rollsigns, and did you make a cab
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 07, 2012, 11:03:31 am
lol after exterior & interior are complete, then i will make my r32's cab
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ErrorMacro11 on March 07, 2012, 11:06:48 am
best results would call this the low quality verson and the next version you can add more texture as many users with integraied graphic cards dont support the high quality trains
ex: R175
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 07, 2012, 11:11:37 am
i know how
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 07, 2012, 11:47:39 am
i need nice roof for r32 ehhh
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ErrorMacro11 on March 07, 2012, 12:19:16 pm
make the roof have the same texture as the body
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dj Hammers on March 07, 2012, 12:20:51 pm
make the roof have the same texture as the body
I don't think that is such a good idea. The existing side texture is already of a low resolution.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ErrorMacro11 on March 07, 2012, 12:24:05 pm
i was talking about the other side of the car, the dark one
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ErrorMacro11 on March 07, 2012, 12:24:55 pm
why dont you get dj hammers to help
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 07, 2012, 12:43:08 pm
why dont you get dj hammers to help
maby he wants to do it himself.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ErrorMacro11 on March 07, 2012, 01:59:38 pm
but i love the R32, spectacular indeed
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ErrorMacro11 on March 07, 2012, 02:01:23 pm
maybe this can help
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 07, 2012, 07:08:48 pm
OpenBVE - R32 exterior by mudwrestle (http://www.youtube.com/watch?v=JEX4DAbTgXc#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 07, 2012, 07:29:29 pm
um im going to make animated rollsign rite now
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ErrorMacro11 on March 07, 2012, 07:46:04 pm
could you leave some blank ones for fictional routes
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: r160bve on March 07, 2012, 08:49:25 pm
Nice progress bro  8)...perhaps you should release an updated beta with all these new updates. I personally dont care, so take your time. Your doing a nice job so far :)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dj Hammers on March 07, 2012, 08:50:24 pm
could you leave some blank ones for fictional routes
I personally strongly disagree; realism should be as high as possible, this should include rollsign readings.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 07, 2012, 09:02:16 pm
Yes, and fictional rollsigns can always be created by yourself for private usage.

Nice progress bro  8)...perhaps you should release an updated beta with all these new updates. I personally dont care, so take your time. Your doing a nice job so far :)

That would be nice, but, why spoil it? I think we should let him finish it and then release the final version for best results  ;)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: peacemak3r on March 07, 2012, 10:34:49 pm
Nice progress bro  8)...perhaps you should release an updated beta with all these new updates. I personally dont care, so take your time. Your doing a nice job so far :)

If you didn't care, you wouldn't have suggested an updated BETA release.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: r160bve on March 08, 2012, 07:05:09 am
It was just a suggestion  :(....perhaps if he releases a updated beta, then we could include more suggestions for more improvements. However I can be patient :D. Lets not get heated over this.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 08, 2012, 08:01:19 pm
OpenBVE - Preview my R32 exterior (http://www.youtube.com/watch?v=tvNiCAFzw0s#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 09, 2012, 02:29:34 am
OpenBVE - Preview my R32 exterior (http://www.youtube.com/watch?v=tvNiCAFzw0s#)
now thats a R32   :D
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 09, 2012, 06:19:40 am
um i fix my r32s roof sign

(http://smhnoob.webs.com/TrapzeRoof.png)

(http://smhnoob.webs.com/TrapzeRoof2.png)

(http://smhnoob.webs.com/TrapzeRoof3.png)

wat do u think? just ignore my roof texture i will fix it soon
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 09, 2012, 06:40:15 am
honestly, i dont know how to remove middle roof. i cant find anywhere code in exterior. thats so sick :\

middle roof color: 160, 160, 160
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 09, 2012, 08:16:18 am
roof updated but middle roof :\

OpenBVE - Preview R32 exterior roof (http://www.youtube.com/watch?v=DWZg-Nx6-XU#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 09, 2012, 08:33:17 am
i found a solution:

[Meshbuilder]
vertex -.50, 3.70, -18.20
vertex  .50, 3.70, -18.20
vertex  .50, 3.70, -00.37
vertex -.50, 3.70, -00.37

face2 0,1,2,3

Translateall 0,0,9.30

so i removed them and my r32 looks almost excellent and almost sexy  :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 09, 2012, 08:37:45 am
wat do u think? :D

(http://smhnoob.webs.com/Roof=D.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: alanr179 on March 09, 2012, 11:22:59 am
Wow great job this looks like that real thing c
an't wait to get this r32
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 09, 2012, 11:52:32 am
That exterior is AWESOME! All it needs now is photorealistic gates and a higher resolution side texture (To look more "shiny" and therefore even more visually appealing)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 09, 2012, 12:00:41 pm
wat do u think? :D

(http://smhnoob.webs.com/Roof=D.png)
front undercarage needs some work. this is great.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 09, 2012, 12:22:36 pm
tell me wat do u think

(http://smhnoob.webs.com/R32ExteriorGates.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 09, 2012, 12:26:31 pm
thats great, with the gatesjust the black outline is unappealling
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 09, 2012, 12:27:58 pm
It's better, but they are a bit too greenish, and yes, the black outline too
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Rikabs on March 09, 2012, 03:53:22 pm
Looks good man. Keep it up
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 09, 2012, 04:54:39 pm
SubwayTrainOperator5 & Dr.subway...do u mean this?

(http://smhnoob.webs.com/img_73942.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: 8thAvExpress on March 09, 2012, 05:22:12 pm
wow nice work i can see why hard to create better trains
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 09, 2012, 06:00:23 pm
SubwayTrainOperator5 & Dr.subway...do u mean this?

(http://smhnoob.webs.com/img_73942.jpg)

I was actually going to say that, about that shadow that the gates on the R32 "attach" to, but I actually meant the thin black outline of the texture. But yes, that dark shadow where the gate attaches to the body should be there too, and the gate should have a rusty appearance.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 09, 2012, 06:17:40 pm
SubwayTrainOperator5 & Dr.subway...do u mean this?

(http://smhnoob.webs.com/img_73942.jpg)

I was actually going to say that, about that shadow that the gates on the R32 "attach" to, but I actually meant the thin black outline of the texture. But yes, that dark shadow where the gate attaches to the body should be there too, and the gate should have a rusty appearance.

oh i see thank you for attention :)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 09, 2012, 06:56:31 pm
I meant the Dark line around the gates. should be a thin gray or something a little darker than the texture itself.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 09, 2012, 06:57:59 pm
um lemme show yall

(http://smhnoob.webs.com/R32Updated.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 09, 2012, 07:03:25 pm
YES  ;D thats it
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Fox-179 on March 09, 2012, 07:09:15 pm
Wow superb!!
May I suggest adding the American flag
and a new MTA logo could be the old M or the current logo
http://upload.wikimedia.org/wikipedia/en/c/c9/R32_C_Train_Door_Shot_168th_Street.JPG (http://upload.wikimedia.org/wikipedia/en/c/c9/R32_C_Train_Door_Shot_168th_Street.JPG)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 09, 2012, 07:15:00 pm
yea thats wat i thought but i am keep looking for old r32's logo like TA in 1970s

(http://images.nycsubway.org/i5000/img_5193.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 09, 2012, 07:17:56 pm
um i found

A. (http://farm3.static.flickr.com/2181/2082473291_2817cc8ff0.jpg)

B. (http://4.bp.blogspot.com/_jJAG_tiB6jQ/STcELZP9PoI/AAAAAAAAA2w/y5wmtC5xaMM/s200/TA+logo.bmp)

which better ? a or b
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 09, 2012, 07:19:03 pm
um lemme show yall

(http://smhnoob.webs.com/R32Updated.png)

Now that is awesome. But they should also look rusty and/or worn and/or dirty (Steel dust, etc), like in real life. Otherwise, perfect  ;)

um i found

A. (http://farm3.static.flickr.com/2181/2082473291_2817cc8ff0.jpg)

B. (http://4.bp.blogspot.com/_jJAG_tiB6jQ/STcELZP9PoI/AAAAAAAAA2w/y5wmtC5xaMM/s200/TA+logo.bmp)

which better ? a or b

I'd say B is better
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 09, 2012, 08:23:39 pm
um got it

(http://smhnoob.webs.com/r32Logo.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 09, 2012, 08:51:21 pm
 http://www.nycsubway.org/perl/show?115424 (http://www.nycsubway.org/perl/show?115424)   this logo looks more appropriate since the train looks late 80s early -mid 90s but a worn down logo
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 09, 2012, 09:00:23 pm
um got it

(http://smhnoob.webs.com/r32Logo.png)

That is great. It would look better if you made a better, higher resolution side texture though
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 09, 2012, 09:04:36 pm
i know
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: peacemak3r on March 09, 2012, 09:07:51 pm
You guys should limit yourselves quoting pics or take the img code off, it's starting to get annoying seeing the same photo 3 times on one page.

Great work though.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 09, 2012, 11:36:24 pm
Try this for the logo and flag    http://www.nycsubway.org/perl/show?66117 (http://www.nycsubway.org/perl/show?66117)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 09, 2012, 11:41:08 pm
um looks nice
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Train man on March 10, 2012, 07:47:02 am
The only problem I can see with that logo is that it is pre-GOH, while the train is post-GOH.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 10, 2012, 08:38:09 am
well i work on two project r32:

MTA: (http://smhnoob.webs.com/MTA%20R32%20By%20MUDWRESTLE.png)

TA: (http://smhnoob.webs.com/TA%20R32%20By%20MUDWRESTLE.png)

but i stopped making Project TA R32 Exterior until i finish with Project MTA R32 Exterior
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: peacemak3r on March 10, 2012, 01:48:07 pm
Is there any way to create a more solid box for the sub-frame?  I feel it's doesn't look right with the bottom front sticking out with a gap with the bottom side.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 10, 2012, 02:00:47 pm

Great start on the Pre-GOH, but do not forget to make the Pre-GOH R32 look much less rusty and worn, since the R32's were brand new back in those days.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 10, 2012, 03:04:53 pm

Great start on the Pre-GOH, but do not forget to make the Pre-GOH R32 look much less rusty and worn, since the R32's were brand new back in those days.
if its like an older preGOH it would be kinda dirty wouldnt it? And the Blue should be like 5% lighter with a better blue. use texture from nycsubway.org, they have plenty of preGOH pictures.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: TyroneR44 on March 10, 2012, 05:21:18 pm
NICEEEEE ALL AROUND ! Did have the sound and the controller update  ;D
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 10, 2012, 09:10:17 pm
um i change seat pic, ceiling

Long Seat: (http://smhnoob.webs.com/R32Interior3.png)

Ceiling: (http://smhnoob.webs.com/R32Interior1.png)

Disability Seat: (http://smhnoob.webs.com/R32Interior2.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ErrorMacro11 on March 10, 2012, 09:22:04 pm
the black outline reappeared
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 10, 2012, 09:27:16 pm
That is great, but the shape of the seats are wrong. The backrests bend just a TINY little bit

http://www.flickr.com/photos/29997762@N05/6777799005/# (http://www.flickr.com/photos/29997762@N05/6777799005/#)

They do not bend that much
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 10, 2012, 09:36:56 pm
SubwayTrainOperator5 this link is funny ceiling bec there are two different kind of ceiling image like:

 | o |||      |||    | and other r32's ceiling is  |    ||| o   |||    |
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ErrorMacro11 on March 10, 2012, 09:44:23 pm
how do i make the floor appear in your beta
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 10, 2012, 09:56:27 pm
ErrorMacro11...Folder name is R32Wall&Floor, Name is Floor.bmp
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ErrorMacro11 on March 10, 2012, 10:23:16 pm
do i delete floor2 because no floor appears in the beta
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 10, 2012, 10:25:38 pm
do i delete floor2 because no floor appears in the beta

Could you post a screenshot of your R32Wall&Floor folder?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 10, 2012, 10:26:28 pm
do i delete floor2 because no floor appears in the beta

dont delete it because floor2 is on front cab and back cab floor
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 10, 2012, 10:32:27 pm
That is great, but the shape of the seats are wrong. The backrests bend just a TINY little bit

http://www.flickr.com/photos/29997762@N05/6777799005/# (http://www.flickr.com/photos/29997762@N05/6777799005/#)

They do not bend that much

this is better now or still?
(http://smhnoob.webs.com/DSeats.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 10, 2012, 11:06:44 pm
That is great, but the shape of the seats are wrong. The backrests bend just a TINY little bit

http://www.flickr.com/photos/29997762@N05/6777799005/# (http://www.flickr.com/photos/29997762@N05/6777799005/#)

They do not bend that much

this is better now or still?
(http://smhnoob.webs.com/DSeats.png)

Yes, that looks better
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 10, 2012, 11:24:11 pm
help, my openbve messed up
i converted one pic to bitmap and the program got glitchy

Screenshot?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 10, 2012, 11:25:05 pm
the one i got had a floor
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 10, 2012, 11:34:55 pm
never mind about the glitch
dr subway 18
could you send me a copy of yours
PM me we will discuss this further
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 10, 2012, 11:45:40 pm
im using openbve v1.2.13.0 and doesnt have plm for long times. it seems love me :)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 11, 2012, 12:19:21 am
Just one question, is it possible you could make the backrest of the seats curve into the part that people sit on, instead of having it all angular like that? Also, looking at some more photos of the R32 interior, It seems that the backrest only slants at the indentation (The point where it starts to curve), though it is a very tiny slant (Probably not even a degree, maybe not even a half of a degree) and then it starts to curve. All of these points I am trying to get at are very difficult to explain using words, so just refer to the photo I gave a link to earlier in the thread to see what I mean.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 11, 2012, 12:44:46 am
Just one question, is it possible you could make the backrest of the seats curve into the part that people sit on, instead of having it all angular like that? Also, looking at some more photos of the R32 interior, It seems that the backrest only slants at the indentation (The point where it starts to curve), though it is a very tiny slant (Probably not even a degree, maybe not even a half of a degree) and then it starts to curve. All of these points I am trying to get at are very difficult to explain using words, so just refer to the photo I gave a link to earlier in the thread to see what I mean.

^^^^^ thats wat i thought and i am still thinking how to code that because it might has pretty alot of code to cause slow loading or something
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 11, 2012, 12:59:31 am
hey Mudwrestle is it gonna have changeable rollsigns? in the beta i didnt see where we could even modify the route letter on the nose or the side window roll sign
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 11, 2012, 01:23:54 am
Here's a picture I found: https://lh5.googleusercontent.com/-WpE1u_FozNQ/TuPR94UKddI/AAAAAAAAIIU/b_lzwKCkTzU/10-6A.png

Even though that is obviously faked with Photoshop (And a little too good to be true) it is very interesting, it would be cool if someone could create a modern, high-tech fictional R32 like Dr Subway's R62A after this R32 is released. Just a random suggestion ;)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 11, 2012, 03:03:12 am
i change r32 square ceiling picture

(http://smhnoob.webs.com/R32BoardCeiling.png)

(http://smhnoob.webs.com/2012-03-10%2014.54.44.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 11, 2012, 09:51:27 am
Preview:
OpenBVE - Updated R32 exterior by mudwrestle (http://www.youtube.com/watch?v=QnjPuCrt-P8#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ErrorMacro11 on March 11, 2012, 10:42:12 am
its flawless. do you see any errors
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 11, 2012, 11:22:33 am
its flawless. do you see any errors

i dont see any errors in my project
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ErrorMacro11 on March 11, 2012, 11:39:48 am
exactly
could you post a vid of the rollsigns
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 11, 2012, 11:47:16 am
i did try make animated rollsign but the code in animated file doesnt make successfully to change objects using keyboard. so i have to find out how to make it
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: r160bve on March 11, 2012, 11:49:59 am
The exterior and interior are all set  8)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ErrorMacro11 on March 11, 2012, 11:52:19 am
ask DJ Hammers
He Did the R38 and Created the animated rollsigns. maybe he could help. release it for now and when he helps you, It'll be finished
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: r160bve on March 11, 2012, 11:57:56 am
That is correct  :)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: IIRules2 on March 11, 2012, 01:02:26 pm
That is great. It would look better if you made a better, higher resolution side texture though
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 11, 2012, 01:44:41 pm
yeah even if it takes a few weeks for Djhammers to do it i think it would be well worth it, or show us how to change them with paint pro, i know how to do it, i just dont know where the front/side files are so i can change the route letters)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 11, 2012, 01:50:17 pm
ask DJ Hammers
He Did the R38 and Created the animated rollsigns. maybe he could help. release it for now and when he helps you, It'll be finished

yeah even if it takes a few weeks for Djhammers to do it i think it would be well worth it, or show us how to change them with paint pro, i know how to do it, i just dont know where the front/side files are so i can change the route letters)

IIRC, it was not DJ Hammers who created the rollsigns, I think they were created by Andrew. I may or may not be wrong though
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Allyn65 on March 11, 2012, 02:28:08 pm
the R32 is come out nice
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 11, 2012, 02:32:24 pm
i found great sample for animated file

http://rieszj.atw.hu/bve/tutorials/aramszedo.html (http://rieszj.atw.hu/bve/tutorials/aramszedo.html)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 11, 2012, 05:35:59 pm
um this animated rollsign code doesnt work o.0. need os_ats1 to work or wat?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 11, 2012, 05:51:38 pm
hmm, you might just be better off making a train for every route.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 11, 2012, 06:46:50 pm
never mind i got one now
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 11, 2012, 06:51:40 pm
never mind i got one now
ok u found an animated one or just a route for each train file?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 11, 2012, 06:56:36 pm
OpenBVE - R32 rollsign (http://www.youtube.com/watch?v=hdVTfWiJ-AA#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 11, 2012, 07:00:52 pm
OpenBVE - R32 rollsign (http://www.youtube.com/watch?v=hdVTfWiJ-AA#)
will it have,G,F,D,V,ect???
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 11, 2012, 07:10:15 pm
also Q,F,B,R,S, 7, L, 2
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 11, 2012, 07:12:26 pm
NO WAIT! T Line ofc
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 11, 2012, 07:22:31 pm
NO WAIT! T Line ofc
and the (U) ROF, i realize that would be a long video trying to do all of them, and a (NIS) route sign.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 11, 2012, 07:25:16 pm
U & NIS & Special & Y & O & K & H
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dj Hammers on March 11, 2012, 07:39:13 pm
You do realize that the Rollsigns on the R32 are EXACTLY the same as the rollsigns on the R38.

You should use the rollsigns from the R38, they are very accurate.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 11, 2012, 09:14:03 pm
Yes, the R32's have all the exact same rollsigns as the R38's, why not use the ones from the R38 instead of unnecessarily having to create completely new ones? Just a suggestion  ;)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: GloomBlue on March 12, 2012, 11:46:05 am
That is very good progress since the last Picture. Is there a beta with a rounded roof?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 12, 2012, 02:09:51 pm
That is very good progress since the last Picture. Is there a beta with a rounded roof?

No, currently the only downloadable version is the first version, which you can find on the first page of this thread
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 12, 2012, 09:27:20 pm
i finish set r32's rollsign

OpenBVE - R32 Rollsign by MUDWRESTLE (http://www.youtube.com/watch?v=kY1uu-HC-Qw#)

i found r32 test pattern so i follow that

R32 Test Pattern (http://www.youtube.com/watch?v=MAqNAukcSvo#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 12, 2012, 11:23:02 pm
was the undercarriage on the front fixed? (instead of a blurred image) BTW this train is comming along great and we all thank you for your dedication to the BVE users  :D
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 13, 2012, 02:21:50 am
What you could do is make a 3D undercarriage, but not TOO 3D detailed, to avoid framerate issues. I'd say only make a few of the key undercarriage elements 3D (Like the wheels, a few of the boxes and stuff under there, etc) and make all the rest (Barely noticable parts, everything else) just basic texture panels. And since the front area of the undercarriage (Front coupler, etc) are the undercarriage parts that are most often seen from outside, that area of the undercarriage should be fairly detailed (Again, FAIRLY detailed, with 3D parts, but do not overdo it)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 13, 2012, 07:26:02 am
yea i try to find good undercarriage picture
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 13, 2012, 11:51:28 am
well im gonna to release an early non-final version of r32.

Download both links:

Sound/Cab/Panel
http://smhnoob.webs.com/R32Sound&Cab&PanelPARTTWO.zip (http://smhnoob.webs.com/R32Sound&Cab&PanelPARTTWO.zip)

Exterior
http://smhnoob.webs.com/R32ExteriorPARTTWO.zip (http://smhnoob.webs.com/R32ExteriorPARTTWO.zip)

FOLLOW MY INSTRUCTION
1. Put Exterior Folder in the R32Sound&Cab&PanelPARTTWO Folder
2. HOW TO CHANGE ROLLSIGN/FLIPDOT/OTHER ACTIVATES
(http://i42.tinypic.com/2u457qr.png)

IF you press number button then enabled(start rollsign, etc)
IF you press same number button AGAIN then disabled(stop rollsign, etc)

...If you dont understand then ask me through AIM or BVEIM or ask someone to help u
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 13, 2012, 12:34:17 pm
ok so the only thing i saw wrong or at least in my opinion was the nose of the train was alittle lower than the body itself other than that it was fine, oh and the undercarrage is from a R160 i think so thats noticable but at least its better than a blur.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 13, 2012, 12:39:35 pm
i know its not final version tho
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 13, 2012, 12:43:26 pm
yeah, but its really really good, to me it stands up to DJhammers R38, idk how multiplayer works but if you ask me these two trains should run together
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Allyn65 on March 13, 2012, 04:04:15 pm
i love this train
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: r160bve on March 13, 2012, 04:36:04 pm
Bill is going to mad when he finds out about this...LOL  ;D No but really, you have really outdone yorself mudwrestle. Do you see that this topic grew to 11 pages in a matter of about 1.5 weeks. That is CRAZY. Anyways, love the train, 10 out of 10, and perhaps if you can contact Bill, he might give you his R32 sounds. Who knows?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 13, 2012, 04:38:04 pm
Bill is going to mad when he finds out about this...LOL  ;D No but really, you have really outdone yorself mudwrestle. Do you see that this topic grew to 11 pages in a matter of about 1.5 weeks. That is CRAZY. Anyways, love the train, 10 out of 10, and perhaps if you can contact Bill, he might give you his R32 sounds. Who knows?
and Nelson with his beautiful R32 cab haha
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: r160bve on March 13, 2012, 04:43:33 pm
Word...forgot about that Nelson  ;D
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Fox-179 on March 13, 2012, 06:31:08 pm
Would it be possible to have scrolling rollsigns in action instead of them displaying/disappearing?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: peacemak3r on March 13, 2012, 08:02:29 pm
Phenomenal work!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: [CT1660] on March 14, 2012, 02:13:45 am
Would it be possible to have scrolling rollsigns in action instead of them displaying/disappearing?

i believe RachelBerryFan47 knows the code to that..something many of us train devs wish knew how to.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 14, 2012, 07:35:54 pm
A scrolling rollsign would be much better, and Rachel Berry Fan does have the code, it was implemented into an early version of the R62A. He even made a video of it:

OpenBVE R62A Working Rollsign Test 2 (http://www.youtube.com/watch?v=H4sp2UYz1o4#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 14, 2012, 09:02:14 pm
today i saw r46 (A) train's logo in broad channel and i took this photo so quick

(http://i44.tinypic.com/fbght.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 15, 2012, 08:02:33 am
R40 slant is back in rockaway park :D
(http://i41.tinypic.com/t4wtc5.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 16, 2012, 07:41:34 am
yea scrolling rollsign will be great tho
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 16, 2012, 12:01:29 pm
hey mudwrestle did you ever get my email with the logo?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 16, 2012, 12:14:30 pm
hey mudwrestle did you ever get my email with the logo?

yea looks sexy
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 16, 2012, 12:21:14 pm
Quote

yea looks sexy
yeah thats how i like my logos ROF
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 16, 2012, 12:23:06 pm
yea bro again i saw r46's logo like M at 6889 car i think
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 16, 2012, 12:26:02 pm
yea bro again i saw r46's logo like M at 6889 car i think
   BMT Subway: Queens and Manhattan Bound (J) / (Z) Skip-Stop train at Cleveland St. (R42 / R160) (http://www.youtube.com/watch?v=9etSisndhuA#ws)   The R42 (the last car) in this video had the same thing, idk why they didnt buff the old glue off and put a clean logo on it.......they had like what 20 years to do it lol,\.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Mr Railfan on March 16, 2012, 12:59:45 pm
Honestly , this is not a rare anomaly . There are tons of cars out there with the Old M Logo exposed , this includes all car classes except SIR r44s and R142s - R160s. Infact i saw an Old M Logo on a R68a B train this morning during my commute.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 16, 2012, 01:32:47 pm
I wish the old M was back  :-\ or the TA logo i could manage seeing
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 16, 2012, 01:51:32 pm
nostalgia trains always the best bec nostalgia trains have best style and no commercial feel me
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 16, 2012, 01:57:46 pm
well thats my opinion and back to work on r32
-added glass windows
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 16, 2012, 03:53:55 pm
maby you can code in the rail gap. just remember to raise the front end up to proper hight, you dont even need to move the door because its already too tall.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 16, 2012, 04:06:40 pm
A third rail gap would be great, along with a sparking feature.  ;)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 16, 2012, 05:05:51 pm
A third rail gap would be great, along with a sparking feature.  ;)
i think the sparking feature is coded into the route, but im not sure.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Pacific385 on March 16, 2012, 05:16:33 pm
A third rail gap would be great, along with a sparking feature.  ;)
i think the sparking feature is coded into the route, but im not sure.
No, a tutorial with the feature can be found at: http://forums.bvestation.com/index.php?topic=1329.msg15171#msg15171 (http://forums.bvestation.com/index.php?topic=1329.msg15171#msg15171)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 16, 2012, 05:24:23 pm
YES!!!! so he can implement it into the train without messing with the route?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 16, 2012, 05:27:56 pm
YES!!!! so he can implement it into the train without messing with the route?

No, he will still have to implement the third rail gap feature on the route, both the route and the train need to have the third rail gap (Although only the train needs the spark feature IIRC) for it to be functional
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 16, 2012, 05:41:44 pm
the spark would be good for now
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 18, 2012, 02:52:28 pm
i added horn, upgrade redlights, glass windows

OpenBVE - Preview my R32 P2 (http://www.youtube.com/watch?v=76yNBmLH2fg#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Failsafe on March 19, 2012, 10:29:03 am
Looking Good Bro Keep Up the good work!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 19, 2012, 07:55:16 pm
Looking Good Bro Keep Up the good work!

thanks bro :)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 22, 2012, 06:01:49 pm
i changed r32's logo

(http://smhnoob2.webs.com/R32MTASLogo.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 22, 2012, 06:12:08 pm
That is great. You should also make the back wall of the cab photorealistic too. That, along with the higher resolution side texture this exterior is in dire need of, will make the exterior of this train pretty much perfect. To make the interior equally good, you should make a better ceiling with a photorealistic texture, and create some ambient light that is realistically yellowish like in real life. Currently it really looks like the interior lights are turned off, it should look like they are on. But it might just be my imagination too, so just add a photorealistic ceiling texture where the lights can be seen on. If that still does not make it look like the interior lights are on, then add the ambient light I mentioned.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 22, 2012, 06:57:04 pm
and adjust the nose then it will be perfect.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 22, 2012, 07:05:34 pm
i know. i made my panel but not perfect. im still workin on it...

(http://smhnoob2.webs.com/Panel.bmp)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 22, 2012, 07:51:43 pm
Great start, but don't use the R68-style controller from Nelson's panel. We already have way too many trains with that controller, I know that a standard GE controller is not available, but it would be nice if the finished panel would have a real SMEE GE controller. Just a suggestion  ;)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 22, 2012, 08:04:56 pm
oh i never meet nelson before.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 22, 2012, 08:23:49 pm
umm ignore everything except window...if you dont feeling so comfortable with this window then tell me

(http://smhnoob2.webs.com/IMG.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 22, 2012, 08:26:32 pm
It is good, but it is a bit too horizontally rectangular. The cab window should extend a bit further up, being more of a perfect square and/or a little bit vertically rectangular
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: [CT1660] on March 22, 2012, 08:34:06 pm
A scrolling rollsign would be much better

Let me give you a little hint... download the Alstom Metropolis train on the managed content thing (yeah all are public domain apparently).

Then go to:
C:\users\(your user name)\Appdata\Roaming\OpenBVE\ManagedContent\alstom-metropolis-c751a\Alstom Metropolis C751A\Extensions\Exterior\

open up vpis.animated, and take a look at the code. just experiment with the code and see what happens.

Also look at all the related vpis csv files for reference.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 22, 2012, 08:40:28 pm
Yes, that would be really good. And as for the flipdot, a key assignment to switch the sign to the next display reading, and another key to switch it to the previous reading would be great. So that you can change it forward or backward as fast as you want instead of the old system where pressing a key starts automatically "scrolling" it in one direction and another key stops it
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 23, 2012, 08:50:54 am
now i learn how to code in panel

my controller looks messed by photoshop's eraser.

OpenBVE - R32 Panel testing by mudwrestle (http://www.youtube.com/watch?v=zbzt2rkeBB0#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 23, 2012, 01:28:41 pm
Try using better textures for the pilot lamp and pressure gauge taken at a straight angle, that does not really look possible to skew. Also, since the control panel on the left is attached to the side wall of the cab (Where the door is), you should make the entire area left of the window look like there is a wall there. And the control panel attaches to a vertical round bar from the bottom too. Here is a photo of  the area I am talking about, for reference: http://www.flickr.com/photos/29997762@N05/6777784871/# (http://www.flickr.com/photos/29997762@N05/6777784871/#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 23, 2012, 01:30:41 pm
the cab window needs to be less square also
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 23, 2012, 01:33:23 pm
Yes, the cab window should be a perfect square, and perhaps even just slightly a vertical rectangle, like in this photo: http://img413.imageshack.us/img413/6287/1000099xg5.jpg (http://img413.imageshack.us/img413/6287/1000099xg5.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 23, 2012, 01:41:18 pm
Yes, the cab window should be a perfect square, and perhaps even just slightly a vertical rectangle, like in this photo: http://img413.imageshack.us/img413/6287/1000099xg5.jpg (http://img413.imageshack.us/img413/6287/1000099xg5.jpg)
ohhh  ok i see whatcha mean
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 23, 2012, 04:42:40 pm
i set 3559 to 3568 cars

OpenBVE - R32's 3559 to 3568 cars (http://www.youtube.com/watch?v=E10rvbRpy_U#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 23, 2012, 10:22:40 pm
i added exit door's floor

(http://smhnoob2.webs.com/ExtFloor.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 24, 2012, 12:05:43 am
i added exit door's floor

(http://smhnoob2.webs.com/ExtFloor.png)
WOWWWWWWWWWWWWWW keep it up. next try some still animated trucks
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 24, 2012, 09:25:02 am
OpenBVE - R32 exit door's floor test (http://www.youtube.com/watch?v=pS5DOqZKfm0#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 24, 2012, 09:56:32 am
um i added scratchiti on the R32's window

does this makes you comfortable?

(http://smhnoob2.webs.com/r32Scratchiti2.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: R62A 2067 on March 24, 2012, 11:06:30 am
It's nice, but in my opinion, I wouldn't wanna drive a train with scrachitti. Btw, you should change some textures. The textures you have now are blurry.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 24, 2012, 11:25:01 am
It's nice, but in my opinion, I wouldn't wanna drive a train with scrachitti. Btw, you should change some textures. The textures you have now are blurry.

you can take it out as you replace old window with new window lol
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: TJay1724 on March 24, 2012, 11:31:03 am
This exterior is coming along beautifully. Can't wait. One thing of note though... The exit door floors you are showing extend from side to side. Not just at the door itself. It's only like that on the R44 and R46. All other trains exit door floors extend from one side to the other. That's all that needs to be fixed in that area. Keep up the great work!!!

Imageshack is requesting an API key, so I just posted a link.

http://nycsubway.org/perl/show?84407 (http://nycsubway.org/perl/show?84407)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 24, 2012, 12:40:05 pm

Mudwrestle this train is beast. ;D
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Simon on March 24, 2012, 02:38:36 pm
Mud I got some textures for you coming soon.

This 32 looks beast though! Great job!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 24, 2012, 02:45:56 pm
I really think you overdid yourself with this train, it looks so awesome! It just needs better textures for the walls and stuff. Also, the second released version did not have the door indicator lights, will they be added in the final version? And will you eventually make the exterior gates have that brown, rusty look to them too?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 24, 2012, 03:15:45 pm
(http://smhnoob2.webs.com/IMG.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Slants4Lyfe on March 24, 2012, 03:21:15 pm
It looks Excellent!. Just one thing, you should replace the lower body (Trucks, etc.) instead of using the R160 trucks and all.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 24, 2012, 08:09:40 pm
tell me wat u think

(http://smhnoob2.webs.com/PreviewR32.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: NYC-T-Driver on March 24, 2012, 08:21:08 pm
OMG, VERY NICE
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 24, 2012, 08:28:39 pm
tell me wat u think

(http://smhnoob2.webs.com/PreviewR32.png)
is that blood on the gates bro? lmao
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 24, 2012, 09:05:56 pm
maybe rat's blood or graffiti or strong rust idk. my photoshop is an idiot and not have enough color features that i am using cs5.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: NYC-T-Driver on March 24, 2012, 09:13:19 pm
lets just agree its rust :-). i mean in real life the train is old and does get rust :-)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: R62A 2067 on March 24, 2012, 09:35:24 pm
Nice work, man. I have one improvement you could do, the head and tail lights. Instead of filling in a circle with red or yellow, why don't you make it more realistic?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 24, 2012, 09:38:18 pm
I wouldn't recommend using an image editing software to create the rust, I'd say take a picture of a rusty gate and use it as a photorealistic texture instead. And yes, the head and tail lights could use a bit of work too, try making the illuminated lights photorealistic too.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 24, 2012, 10:08:55 pm

(http://smhnoob2.webs.com/LightOn.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: NYC-T-Driver on March 24, 2012, 10:16:34 pm

(http://smhnoob2.webs.com/LightOn.png)

whats with the dis coloration. goes from grey to a tannish yellow
??
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 24, 2012, 10:23:08 pm
maybe it was rats pee im kidding lol. dont worrying about my dirty gate and i will change nice gate later
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: NYC-T-Driver on March 24, 2012, 10:29:24 pm
will you be adding rotating wheels and pivoting trucks?.

nice work though
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 24, 2012, 10:49:20 pm
will you be adding rotating wheels and pivoting trucks?.

nice work though
even if the trucks pivot, it will be straight
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: NYC-T-Driver on March 24, 2012, 10:58:51 pm
your right :-). i just like realistic trains. im a fan of all mta trains/routes :-)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 24, 2012, 11:48:13 pm

(http://smhnoob2.webs.com/LightOn.png)

Wow, those headlights look awesome!  8)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 25, 2012, 08:17:09 am
tell me wat u think?
OpenBVE - R32 head & tail light test (http://www.youtube.com/watch?v=IAX4DWRyWG8#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 25, 2012, 08:36:26 am
tell me wat u think my gate?

(http://smhnoob2.webs.com/Gate.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Pacific385 on March 25, 2012, 08:38:32 am
tell me wat u think?
OpenBVE - R32 head & tail light test (http://www.youtube.com/watch?v=IAX4DWRyWG8#)
Looking good,  however, i think that the other flip dots were better
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 25, 2012, 08:40:55 am
exactly
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 25, 2012, 09:27:23 am
glow flipdot

OpenBVE - Glow flipdot (http://www.youtube.com/watch?v=fUnXRLD5NKI#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 25, 2012, 09:54:16 am
should i make 0-9 flipdot?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: R40R32 on March 25, 2012, 09:57:57 am
The flip dots should be realistic as in they have 0-9 and A-Z on the R32's in reality so yes you should.
Keep up the great work!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: NYC-T-Driver on March 25, 2012, 10:58:50 am
video was very nice. i like it
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 25, 2012, 01:29:25 pm
tell me wat u think my gate?

(http://smhnoob2.webs.com/Gate.png)

That gate looks perfect. And the glowing flipdot is great too, but you should make the bonnet of the train correspond to the changing darkness as well, making the bonnet look dark too as the train enters a tunnel
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 26, 2012, 05:05:43 am
(http://smhnoob2.webs.com/r32nighttime.png)

Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: [CT1660] on March 26, 2012, 08:35:05 am
Good job there Mudwrestle! This is coming out VERY good!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Rikabs on March 26, 2012, 10:41:51 am
This is some good stuff. Keep it up. Nice to see new developers.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 26, 2012, 02:19:46 pm
I can't help but say that I am IMPRESSED! The R32 is a much-needed train on here, and you are really doing an awesome job on it. You should also add ambient light in the interior and make it possible to turn the interior lighting  on and off like in Rikabs' R46.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: [CT1660] on March 27, 2012, 01:56:28 pm
TA: (http://smhnoob.webs.com/TA%20R32%20By%20MUDWRESTLE.png)


Just don't forget, the pre-goh doesn't have the US flag and the number plate font is different. the number plate template is in a PM i sent you.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 27, 2012, 10:01:07 pm
OpenBVE - R32 Flipdots test (http://www.youtube.com/watch?v=4MvgQOkbxIs#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 27, 2012, 10:11:26 pm
Is it just me or do the turned-on headlight images look off-centered with the headlights on the actual front texture? Great work though, you should now start working on the storm door gate (To make it photorealistic like everything else), along with the back wall of the cab and the interior ceiling.  ;)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 28, 2012, 06:56:14 pm
OpenBVE - R32 scrolling rollsign test (http://www.youtube.com/watch?v=cInn_qTiLjc#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 28, 2012, 06:57:57 pm
Absolutely perfect
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: JayJay85 on March 28, 2012, 07:58:06 pm
good job on keep up the good work
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 29, 2012, 06:29:21 pm
thanks to everyone


OpenBVE - Preview R32, Gto9smith (http://www.youtube.com/watch?v=uzSmWjgur8Q#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 29, 2012, 08:35:03 pm
I am assuming those slightly messed up rollsigns (Exterior rollsign not in sync with interior rollsign) will be fixed, right? Good job though!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 29, 2012, 08:48:20 pm
I am assuming those slightly messed up rollsigns (Exterior rollsign not in sync with interior rollsign) will be fixed, right? Good job though!

i will fixing them bro
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on March 30, 2012, 09:39:10 am
thanks to everyone


OpenBVE - Preview R32, Gto9smith (http://www.youtube.com/watch?v=uzSmWjgur8Q#)
thanks dude for the best train thats ever been released and computer friendly ;D
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Allyn65 on March 30, 2012, 02:39:03 pm
good job on keep up the good work
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: rstar on March 30, 2012, 03:50:55 pm
http://www.nycsubway.org/perl/show?104078 (http://www.nycsubway.org/perl/show?104078) the front trucks
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: peacemak3r on March 30, 2012, 04:18:44 pm
Awesome work, can't wait for the final release.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 30, 2012, 08:48:06 pm
im changing everything in r32 now

(http://smhnoob2.webs.com/repairr32(1).png)
(http://smhnoob2.webs.com/repairr32(2).png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Pacific385 on March 30, 2012, 09:14:23 pm
What exactly are you changing?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 31, 2012, 11:10:43 pm
like this
(http://smhnoob2.webs.com/R32Front.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on March 31, 2012, 11:59:56 pm
Great rear cab wall, but the left gate now looks off the right spot in that picture. And don't forget to make the gate shadow on the front texture extend up to the top of the gates instead of just stopping at the middle  ;)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 01, 2012, 08:51:21 am
(http://smhnoob2.webs.com/RearCabWall.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 01, 2012, 10:49:34 am
i change r32s interior poles

(http://smhnoob2.webs.com/Poles.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on April 01, 2012, 10:53:46 am
(http://smhnoob2.webs.com/RearCabWall.png)

Or that, that gate looks good too. You should start working on removing the thin black outlines of the textures in the interior
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: R62A 2067 on April 01, 2012, 05:25:44 pm
Just a tip, on the real R32 the windows on the doors are the same height as the windows on the car body.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 03, 2012, 02:15:11 pm
Just a tip, on the real R32 the windows on the doors are the same height as the windows on the car body.

well i can see
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 03, 2012, 07:53:56 pm
OpenBVE - R32 Wheel rotating test (http://www.youtube.com/watch?v=vvwCIorxxZY#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on April 03, 2012, 07:58:25 pm
Hmm, the video is just a green screen when I play it, but judging from the thumbnail I think that undercarriage looks pretty good!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 03, 2012, 08:14:28 pm
Hmm, the video is just a green screen when I play it, but judging from the thumbnail I think that undercarriage looks pretty good!

green screen? really?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on April 03, 2012, 08:18:32 pm
Hmm, the video is just a green screen when I play it, but judging from the thumbnail I think that undercarriage looks pretty good!

green screen? really?

Yeah, when I play your video I just see a solid green instead of the actual video. It may be just me though, I got a similar problem on a few other videos on YouTube as well.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 03, 2012, 08:24:51 pm
weird
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on April 03, 2012, 09:40:45 pm
I fixed the green screen problem by right clicking your video, clicking Settings, and unchecking "Enable Hardware Acceleration" in the Display tab in Flash Player settings. Anyway, those wheels look great. Now it needs a new texture for the rest of the undercarriage to go with it, then it will be perfect.  ;)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 03, 2012, 09:43:33 pm
yea i need a good texture for undercarriage...
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 04, 2012, 12:22:53 pm
OpenBVE - Preview R32 Part Three (http://www.youtube.com/watch?v=aQyaPbWNEOw#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: r160bve on April 04, 2012, 04:11:53 pm
Its perfect...now all i need is a new computer lol ;D
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 04, 2012, 06:40:26 pm
Its perfect...now all i need is a new computer lol ;D

thanks but im not making a huge file like 400MB. my r32 file is about 22.2MB now
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: r160bve on April 05, 2012, 07:14:42 am
I meant that my processor wouldnt be capable but whatever...thats just my problem...lol  :D
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 05, 2012, 07:35:05 am
I meant that my processor wouldnt be capable but whatever...thats just my problem...lol  :D

oh damn
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 05, 2012, 07:52:44 am
i changed my gate

(http://smhnoob2.webs.com/R32GatePartOne.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 06, 2012, 12:59:34 am
R32's Curve Seat

tell me wat u think

(http://smhnoob2.webs.com/R32CurveSeat.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Pacific385 on April 06, 2012, 07:31:35 am
R32's Curve Seat

tell me wat u think

(http://smhnoob2.webs.com/R32CurveSeat.png)
Looking good, you should change the coordinates to flip the top seat texture
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 06, 2012, 08:38:37 am
oh i will
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Haven on April 06, 2012, 08:59:20 am
You've done a really good job with this. Keep it up!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 06, 2012, 10:21:10 am
You've done a really good job with this. Keep it up!

thx bro
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 06, 2012, 05:20:54 pm
today i took photos of r32

(http://smhnoob2.webs.com/2012-04-06%2013.35.38.jpg)
(http://smhnoob2.webs.com/2012-04-06%2015.26.15.jpg)
(http://smhnoob2.webs.com/2012-04-06%2015.50.11.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 07, 2012, 08:29:36 am
i update my r32's seats

tell me what u think?

(http://smhnoob2.webs.com/R32CurveSeat%282%29.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Pacific385 on April 07, 2012, 02:37:29 pm
It's looking good, takes the poles of the side perfectly from what i can see
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 08, 2012, 08:44:02 am
It's looking good, takes the poles of the side perfectly from what i can see

u mean this

(http://smhnoob2.webs.com/R32CurveSeat%283%29.png)
(http://smhnoob2.webs.com/R32CurveSeat%284%29.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 08, 2012, 09:22:12 am
Storm Doors Side and Chain
(http://smhnoob2.webs.com/StormDoorSide%281%29.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: R62A 2067 on April 08, 2012, 06:43:59 pm
This train is outstanding!
Now to fix your side texture, and your gonna be all set.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on April 09, 2012, 12:57:13 am
This is coming out beautifully, amazing job indeed! Perhaps you could make an R38 in the future using this one as a base. The current R38 exterior we have now is a bit rudimentary for this day and age of OpenBVE.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dj Hammers on April 09, 2012, 01:11:22 am
This is coming out beautifully, amazing job indeed! Perhaps you could make an R38 in the future using this one as a base. The current R38 exterior we have now is a bit rudimentary for this day and age of OpenBVE.
Wait until summer near the end of June.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: [CT1660] on April 09, 2012, 01:15:01 am
This is coming out beautifully, amazing job indeed! Perhaps you could make an R38 in the future using this one as a base. The current R38 exterior we have now is a bit rudimentary for this day and age of OpenBVE.

ironically i was just saying that to Hammers as well lol.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 09, 2012, 07:16:11 pm
This is coming out beautifully, amazing job indeed! Perhaps you could make an R38 in the future using this one as a base. The current R38 exterior we have now is a bit rudimentary for this day and age of OpenBVE.

thanks and i dont know because i dont want to steal their project r38. i have to respect them.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Haven on April 09, 2012, 08:11:46 pm
NICE
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on April 09, 2012, 08:23:33 pm
Just one thing about the seats, the horizontal indentation line should be on the lower part of the backrest at the point where it starts to curve, instead of halfway between the seat and the backrest. And you should change the texture of the window panel to match the crispness of the door panel textures too.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 10, 2012, 04:32:46 pm
Preview R32 Part 4
OpenBVE - Preview R32 Part 4 (http://www.youtube.com/watch?v=e3zToZNhKvs#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on April 10, 2012, 04:58:01 pm
Preview R32 Part 4
OpenBVE - Preview R32 Part 4 (http://www.youtube.com/watch?v=e3zToZNhKvs#)
excellent work, could use the 3rd rail spark on the trucks bro
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: TJay1724 on April 10, 2012, 05:16:32 pm
I keep seeing people talk about putting the sparks on the trains. As far as I know, the sparks are not a part of the train. They are animated objects encoded into the route file itself. Unless someone knows something I don't.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on April 10, 2012, 09:04:19 pm
Yes, the spark is a route feature, not a train feature. Anyway, exterior is perfect except for the doors and side texture. Interior is perfect except for the ceiling and the two things I mentioned before. I wish I could get a ceiling texture or side texture for you but I do not have either time or a proper camera. But great so far!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 11, 2012, 12:08:27 am
(http://smhnoob2.webs.com/R32DoorPart2.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 11, 2012, 04:39:45 pm
OpenBVE - Preview R32 Panel Part 2 (http://www.youtube.com/watch?v=xayPJ9O1cEU#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Pacific385 on April 11, 2012, 05:02:24 pm
Recommendations:
- Replace Controllers
- Fix the Speedometer
- See if you can get a better texture for the panel
(BTW the video needs to be trimmed since it stops before the time's up)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 11, 2012, 05:48:49 pm
Recommendations:
- Replace Controllers
- Fix the Speedometer
- See if you can get a better texture for the panel
(BTW the video needs to be trimmed since it stops before the time's up)

i know and my hypercam and window movie maker are tripping now
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 11, 2012, 06:29:56 pm
(http://smhnoob2.webs.com/R32PanelPart3.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 13, 2012, 10:56:51 pm
i changed my r32s side

(http://smhnoob2.webs.com/R32SidePart2.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: R62A 2067 on April 13, 2012, 11:13:39 pm
Thats a thumbs up! Now to match the door windows with the car body windows, this train is SWAG!!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on April 13, 2012, 11:25:29 pm
That looks awesome! The door windows should perfectly match the width of the rest of the windows (They currently are a bit off, they should extend down to exactly the midway point between the top and bottom of the doors) and the undercarriage should be replaced with a real R32 undercarriage too. Great work!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 14, 2012, 01:16:38 pm
That looks awesome! The door windows should perfectly match the width of the rest of the windows (They currently are a bit off, they should extend down to exactly the midway point between the top and bottom of the doors) and the undercarriage should be replaced with a real R32 undercarriage too. Great work!

i will make real r32 undercarriage but i hold it.

OpenBVE - New R32 Side (http://www.youtube.com/watch?v=aqPNsIPEYQw#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on April 14, 2012, 10:51:03 pm
There is one thing I noticed while checking out the exterior, the storm door window should be a perfect square, in my resolution it seems to be too much of a vertical rectangle. Unless you have already fixed it, that is something to maybe look into. But the exterior is otherwise near perfect except for the undercarriage and door windows.  ;)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 14, 2012, 11:23:12 pm
There is one thing I noticed while checking out the exterior, the storm door window should be a perfect square, in my resolution it seems to be too much of a vertical rectangle. Unless you have already fixed it, that is something to maybe look into. But the exterior is otherwise near perfect except for the undercarriage and door windows.  ;)

yeah i notice and thanks for feedback :)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: (SIR) North Shore Line on April 17, 2012, 01:40:57 pm
Hey mudwrestle, I have sounds for the R32. I'll send them soon but the old version can be heard here:

OpenBVE - NYCT (H) Express Train (10th Ave to Canal St) (http://www.youtube.com/watch?v=ek_qUHIhiN8#ws)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 17, 2012, 03:06:37 pm
Hey mudwrestle, I have sounds for the R32. I'll send them soon but the old version can be heard here:

OpenBVE - NYCT (H) Express Train (10th Ave to Canal St) (http://www.youtube.com/watch?v=ek_qUHIhiN8#ws)

oh i see
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on April 18, 2012, 10:26:14 pm
Here is a suggestion I came up with, how about you ask Error if you could use the front texture from his non-interior exterior, the one that will be in the (E) Line as a static train? That front texture would fit this exterior better in my opinion, however it has the "additional" 2D gates on the texture itself, but that is easy to edit out.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 19, 2012, 01:43:41 pm
R32 Panel
(http://smhnoob2.webs.com/R32Cabpart1.png)
(http://smhnoob2.webs.com/R32Cabpart2.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 19, 2012, 06:35:39 pm
R32 Panel Updated

OpenBVE - Preview R32 Panel Part 3 (http://www.youtube.com/watch?v=wPne1NJlK8k#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on April 19, 2012, 06:44:48 pm
Looks good. The control panel on the left should be a lot bigger though, and extending down a lot lower. You should also create a GE controller and use it instead, like most SMEE's have.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 21, 2012, 12:13:06 pm
OpenBVE - Test R32 HeadLight on the wall (http://www.youtube.com/watch?v=j0WNHC1ccqw#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 21, 2012, 01:19:28 pm
HeadLight
(http://smhnoob2.webs.com/HeadLight1.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on April 21, 2012, 06:14:17 pm
That looks good, but try making the beam more yellowish. Whenever I see an R32 (Or any train) come into a station the light reflection on the walls and track is always very yellowish.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 21, 2012, 06:25:16 pm
That looks good, but try making the beam more yellowish. Whenever I see an R32 (Or any train) come into a station the light reflection on the walls and track is always very yellowish.
i will
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 21, 2012, 07:30:50 pm
subwaytrainoperator5...look at this pic

(http://cutthroatkids.files.wordpress.com/2010/01/subway_train_in_tunnel.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on April 21, 2012, 08:01:01 pm
Yes, gold/yellowish-white, almost red. That is how it should look.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: BStyles on April 22, 2012, 01:32:27 am
Actually no, the dirt on the walls of the tunnels and the headlights make the light a yellowish orange. If this were a perfect world(lol, perfect) then that would be a white light.

On something like the 1969 Franklin Avenue Shuttle, that would look just about right.

BStyles
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on April 23, 2012, 07:02:20 pm
Actually no, the dirt on the walls of the tunnels and the headlights make the light a yellowish orange. If this were a perfect world(lol, perfect) then that would be a white light.

On something like the 1969 Franklin Avenue Shuttle, that would look just about right.

BStyles

Since it wouldn't make sense to use the Post-GOH R32 on the 1969 Shuttle anyway, I think it would be a good idea to give the Pre-GOH R32 the white light reflection and the Post-GOH R32 the golden reflection. Because the Pre-GOH R32's had cleaner headlights than they do now
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 26, 2012, 07:50:40 pm
new r32 side

(http://smhnoob2.webs.com/r32sidepart4.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on April 26, 2012, 09:51:52 pm
OH SNAP!!!FRESH!!! ;) ;D
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on April 26, 2012, 10:37:31 pm
That looks good! The doors look a bit messed up though, and you could improve the window frames too (Both passenger windows and driver's window)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on April 27, 2012, 02:13:49 am
Holy s&@t :o :o :o :o :o Mudwrestle can build a train, every right to call you mudwrestle heavy industries lol
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 01, 2012, 08:54:38 am
OpenBVE - K to Roosevelt Ave (http://www.youtube.com/watch?v=03cL_908gsA#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on May 01, 2012, 09:36:24 am
OpenBVE - K to Roosevelt Ave (http://www.youtube.com/watch?v=03cL_908gsA#)
can you fix that 1 little piece sticking up on the roof?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 01, 2012, 10:12:05 am
 can you fix that 1 little piece sticking up on the roof?

what do u mean?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on May 01, 2012, 11:05:19 am
well in the video, look at the roof of the train as it goes by, you'll see a little black thing at the top end of each car.    go to 0:17 in the video and look between the cars at the top, theres a little black piece, then press play and you should see what im trying to say
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 01, 2012, 11:41:07 am
well in the video, look at the roof of the train as it goes by, you'll see a little black thing at the top end of each car.    go to 0:17 in the video and look between the cars at the top, theres a little black piece, then press play and you should see what im trying to say

u mean this?

(http://smhnoob2.webs.com/RoofsBlack(1).png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on May 01, 2012, 01:15:06 pm
well in the video, look at the roof of the train as it goes by, you'll see a little black thing at the top end of each car.    go to 0:17 in the video and look between the cars at the top, theres a little black piece, then press play and you should see what im trying to say

u mean this?

(http://smhnoob2.webs.com/RoofsBlack(1).png)
higher, at the top of the roof, between the cars, watch the video and look at the roof, you'll see it sticking out.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on May 01, 2012, 02:15:28 pm
One thing I noticed in the video, the front of the undercarriage is quite unrealistic with all those massive gaps, some texturing in that area would be nice. Or you could put a textured box in the middle of the truck like Rikabs did on his R46.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 01, 2012, 03:01:02 pm
(http://smhnoob2.webs.com/R32Roof5.png)

and

SubwayTrainOperator5 i will replace r32's realistic front of the undercarriage later
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Mr Railfan on May 01, 2012, 10:09:11 pm
(http://smhnoob2.webs.com/R32Roof5.png)

and

SubwayTrainOperator5 i will replace r32's realistic front of the undercarriage later


looks good but you still need to replace the NTT underbody . Unless you have 3d boxes and stuff to put under it use the underbody from my r42
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: R62A 2067 on May 09, 2012, 03:20:00 pm
Mudwrestle, can you fix the texture of your windows? Compared to the rest of the carbody the windows look very bad.
(no offense)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: coneyislandDFNQ on May 09, 2012, 07:44:51 pm
really good
but needs
- Ability to change rollsigns
- a panel
and a cab

See CT1660 for installment of signs or DJ Hammers R38. Remember ask for permission. Mudwrestle you did great. Keep up the good work and i agree with peacemaker on the doors. In the coding of the animated doors, adjust the timing. If you dont know how, see me or CT1660 on Teamspeak, we would be happy to help.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: coneyislandDFNQ on May 09, 2012, 07:47:54 pm
Mudwrestle, can you fix the texture of your windows? Compared to the rest of the carbody the windows look very bad.
(no offense)

The window is fine, its only because of it being a resized picture it looks bad. What he needs to do is adjust the roll sign position before laying down the animated coding for the roll signs. Then from there he can fix any minor things. Try using Object Bender it does help when making curved objects.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 11, 2012, 04:11:07 pm
oh well
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Simon on May 12, 2012, 10:32:19 pm
Project is HAM. Great work!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 13, 2012, 11:06:58 am
lol simon i like ham!

what do u think my front of the undercarriage?
(http://smhnoob2.webs.com/FrontUndercarriage.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on May 13, 2012, 12:59:33 pm
That looks perfect  ;)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 14, 2012, 12:58:00 pm
allright ill thinking about R32 will release or until my projects are finished then release them maybe so
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: nightmare403 on May 14, 2012, 06:30:48 pm
allright ill thinking about R32 will release or until my projects are finished then release them maybe so

i think u should release the r32 first then do ur other projects
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dj Hammers on May 14, 2012, 07:54:11 pm
I agree, the best thing to do is to do projects sequentially; finish the first before moving on full time to the second. Otherwise you end up tired with a lot of unfinished projects on your hands.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: nightmare403 on May 14, 2012, 08:20:41 pm
I agree, the best thing to do is to do projects sequentially; finish the first before moving on full time to the second. Otherwise you end up tired with a lot of unfinished projects on your hands.

finally someone who agress with me. anyways, u should release r32 first then continue with anything else
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 14, 2012, 08:30:23 pm
allright i understand..im gonna 2 check em now if i see any error or watever then repair them

Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: nelson3001 on May 14, 2012, 08:43:26 pm
I need to finish the panel for the train. It's just sitting on my computer halted because of lack of textures and school work keeping me so busy. I'm gonna have to try and get textures myself. But in the meantime I guess we're gonna have to use old panel.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 14, 2012, 11:34:55 pm
I need to finish the panel for the train. It's just sitting on my computer halted because of lack of textures and school work keeping me so busy. I'm gonna have to try and get textures myself. But in the meantime I guess we're gonna have to use old panel.

i did make my own panel if u have one then show me here :)

OpenBVE - Preview R32 Panel Part 3 (http://www.youtube.com/watch?v=wPne1NJlK8k#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: nelson3001 on May 15, 2012, 05:33:05 pm
That's a nice panel. It seems like you took those textures from the previews of my panel that I posted up. That's fine with me. If you want the files I can send them to you and you can decide whether you want to use those instead of yours.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 15, 2012, 05:36:29 pm
That's a nice panel. It seems like you took those textures from the previews of my panel that I posted up. That's fine with me. If you want the files I can send them to you and you can decide whether you want to use those instead of yours.

oh well u can send files to me if u can
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on May 15, 2012, 07:49:09 pm
That panel is starting to look great! The things that still need improvement are the power/brake notches (To be more "smooth" when moving the handles between notches), the pressure gauge (The needles should be made smaller so they do not extend beyond the edges of the gauge), and the switch panel (It should be much bigger, extending down to almost controller level). And for the exterior/interior, I realized the seats do not look dark enough (They look light grey instead of dark grey/black like in real R32's), you should keep that texture for the seats but try making it darker so that it looks more realistic.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 15, 2012, 08:20:37 pm
That panel is starting to look great! The things that still need improvement are the power/brake notches (To be more "smooth" when moving the handles between notches), the pressure gauge (The needles should be made smaller so they do not extend beyond the edges of the gauge), and the switch panel (It should be much bigger, extending down to almost controller level). And for the exterior/interior, I realized the seats do not look dark enough (They look light grey instead of dark grey/black like in real R32's), you should keep that texture for the seats but try making it darker so that it looks more realistic.

i know
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 15, 2012, 09:12:42 pm
(http://smhnoob2.webs.com/R32Seat.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on May 15, 2012, 09:23:30 pm
Yes, that looks much better  ;) I don't know if it is just me or the picture resolution, but the bottom part of the seats that curves up seems to be too steep, you should try looking into that possibly. You should also work on the ceiling now, and the doors and windows. Another suggestion, if possible, maybe you could try coding in a dark translucent shadow-like object under the train so that it looks more realistic. We do not have any trains that have a feature like that yet to it would be cool to have it.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 17, 2012, 08:20:31 pm
Yes, that looks much better  ;) I don't know if it is just me or the picture resolution, but the bottom part of the seats that curves up seems to be too steep, you should try looking into that possibly. You should also work on the ceiling now, and the doors and windows. Another suggestion, if possible, maybe you could try coding in a dark translucent shadow-like object under the train so that it looks more realistic. We do not have any trains that have a feature like that yet to it would be cool to have it.

bottom of the seats are steep

(http://i4.ytimg.com/vi/sbgXCmAS2os/hqdefault.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on May 17, 2012, 09:02:35 pm
Yes, but in real life they are not as steep as they look in your screenshot
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 18, 2012, 05:31:53 pm
well i did took photos of them from r32 train
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 18, 2012, 05:32:59 pm
or i didnt rotating photos
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 20, 2012, 11:46:12 am
i seen 2 of ad frames look blurry i gotta 2 fix them tho...

(http://smhnoob2.webs.com/R32DisabilitySeat1.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: B4ucmenow on May 20, 2012, 01:13:46 pm
The train looks prefect... If anything, i would say lift the gates or make them bigger on the Front end just like it was  originally...Other than that.... Great job ;)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 20, 2012, 08:43:16 pm
The train looks prefect... If anything, i would say lift the gates or make them bigger on the Front end just like it was  originally...Other than that.... Great job ;)

yea
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 23, 2012, 10:43:03 am
(http://smhnoob3.webs.com/Labelr32.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: error46146 on May 23, 2012, 01:47:03 pm
Nice, you forgot the white line above the car # stickers though lol
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 23, 2012, 03:15:59 pm
Nice, you forgot the white line above the car # stickers though lol

ah i forget LOL thanks
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 23, 2012, 08:30:53 pm
better? @ cab wall
(http://smhnoob3.webs.com/IntRearCabWall.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Train man on May 23, 2012, 11:29:44 pm
Is that real? Lol. Awesome work. Keep it up!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 24, 2012, 09:07:23 pm
better?

(http://smhnoob3.webs.com/LabelR32(2).png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Pacific385 on May 25, 2012, 04:25:29 pm
It looks good. Just a suggestion though, you should make the background texture clearer (if you can obtain a different one)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on May 25, 2012, 05:06:03 pm
It looks good. Just a suggestion though, you should make the background texture clearer (if you can obtain a different one)

No, it's fine, it just looks weird up close in comparison with the smaller separate textures. From farther away, this looks pretty much perfect. I'd say the side window frame areas (Both inside and outside) should be replaced with higher resolutions ones since they look weird both near and far.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 28, 2012, 03:05:41 pm
well pacific is correct i need a new background texture so it'll looking good tho and SubwayTrain i will replace the side window frame areas
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on June 12, 2012, 08:34:36 am
(http://smhnoob3.webs.com/R32IntLabelAds.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Pegasusleos4 on June 12, 2012, 12:33:44 pm
Speechless  :o ;D
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Failsafe on June 12, 2012, 04:20:00 pm
This project is coming along nicely Mudwrestle, keep up the good work!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on June 14, 2012, 07:14:37 am
i changed ceiling texture

(http://smhnoob3.webs.com/R32Ceiling1.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Failsafe on June 14, 2012, 09:25:30 am
i changed ceiling texture

(http://smhnoob3.webs.com/R32Ceiling1.png)

Very Nice, Very Nice
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: YankeesPwnMets on June 14, 2012, 11:39:34 am
Any way you can get rid of the extra blue?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on June 14, 2012, 11:46:07 am
Any way you can get rid of the extra blue?

extra blue from where
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Failsafe on June 14, 2012, 12:17:16 pm

(http://smhnoob3.webs.com/R32Ceiling1.png)





You see those blue lines on the doors and windows?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on June 14, 2012, 01:01:53 pm
oh failsafe i know and dont worrying about them. thanks for feedback
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Failsafe on June 14, 2012, 03:23:20 pm
Mhmm, Your Welcome Mudwrestle, and Keep Up The Good Work
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: 555555 on June 16, 2012, 01:51:20 pm
Thanks For The Link

55555 The Bve 1 2 4 openbve Expert


Stay Tuned For The
R33WF (Not TOMC) Set For openbve/Bve
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on June 16, 2012, 09:31:46 pm
i changed r32 light ceiling texture

(http://smhnoob3.webs.com/R32LightCeiling1.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on June 16, 2012, 10:50:35 pm
Looks nice. That should just about make the entire interior look and feel more realistic automatically
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on June 16, 2012, 11:27:28 pm
(http://smhnoob3.webs.com/R32LightCeiling2.jpeg)
(http://smhnoob3.webs.com/R32LightCeiling3.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: nelson3001 on June 18, 2012, 06:47:18 pm
I can get you textures if you need some.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on June 18, 2012, 10:36:38 pm
I can get you textures if you need some.
Up to you
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Failsafe on June 19, 2012, 09:35:45 am
Looking Foward To Operating This Train!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on June 26, 2012, 07:42:06 pm
Project R32 has been discontinued updating onto this forum due to recent events....
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on June 28, 2012, 04:05:00 pm
This project has been resumed...
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on June 28, 2012, 04:07:42 pm
Rear:
(http://smhnoob3.webs.com/R32Rear.png)
Side:
(http://smhnoob3.webs.com/R32Side3.png)
Interior:
(http://smhnoob3.webs.com/R32Interior.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Simon on June 28, 2012, 05:34:23 pm
Good progress! Something seems a little off about the second to last pair of doors from the left though.

Other than that, amazing work!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on June 28, 2012, 09:25:44 pm
I put seats back in r32 interior now
(http://smhnoob3.webs.com/r32interior2.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: YankeesPwnMets on June 28, 2012, 09:27:28 pm
Very good, but the black around the edges of some of the poles should be removed.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Pegasusleos4 on June 28, 2012, 11:41:48 pm
I am so Speechless. Wonderful Job  :) :D ;D. Can't wait to drive this train.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ipac on June 29, 2012, 11:42:40 am
Excellent work, just like YankeesPwnMets said, just refine/remove those black edges along the handrails and it should look great.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on June 30, 2012, 02:21:06 pm
inside of cab and u see at very thin light of cab door
(http://smhnoob3.webs.com/R32CabDoorTransparent.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dj Hammers on June 30, 2012, 03:06:04 pm
Just a note, when T/Os are operating the train, they are not allowed to do so with the cab light on.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on June 30, 2012, 03:42:46 pm
Just a note, when T/Os are operating the train, they are not allowed to do so with the cab light on.

i know but i mean u see r32 interior light thru cab door's thin horizon and vertical
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on June 30, 2012, 05:08:27 pm
Realistic Ads Ceiling
(http://smhnoob3.webs.com/R32Interior4.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on June 30, 2012, 07:09:36 pm
It looks amazing! The windows and the doors look like they could use just a bit of work, and yes, you should try to remove the black outline on the seat/ceiling handrails and the windows.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: YankeesPwnMets on July 01, 2012, 12:09:24 am
Nice work. I don't think the ceiling is supposed to be completely flat though... I think its very slightly curved

http://www.flickr.com/photos/29997762@N05/6777793021/# (http://www.flickr.com/photos/29997762@N05/6777793021/#)

(not my photo)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 01, 2012, 09:13:01 am
Nice work. I don't think the ceiling is supposed to be completely flat though... I think its very slightly curved

http://www.flickr.com/photos/29997762@N05/6777793021/# (http://www.flickr.com/photos/29997762@N05/6777793021/#)

(not my photo)

i know u have same my thought from few months ago
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 01, 2012, 09:13:31 am
r32 has a curved ceiling of course
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Shawn1995 on July 01, 2012, 11:58:35 am
Truly Magnificent! This train is turning out to look pretty good. It's almost perfect.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: B4ucmenow on July 01, 2012, 12:05:37 pm
Hello Mudwrestle, your cars are absolutely fantastic in my book... The only thing i would change is the Gates on the front... They need a slight left upward.. Other than that your in great shape... But also remember this, this is your baby...Its doesn't have to be perfectly built to the tee.. This is art representing something in the real world.. And as an actual operator of these cars, operating the beta version made me feel at home  ;D  prior to joining this site, i did a lot of work with MSTS and still do.. Check out this vid of an reskinned IRT car.. I call it the R39 http://youtu.be/4VeFWIYmQaA (http://youtu.be/4VeFWIYmQaA)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 12, 2012, 07:16:44 am
Hello Mudwrestle, your cars are absolutely fantastic in my book... The only thing i would change is the Gates on the front... They need a slight left upward.. Other than that your in great shape... But also remember this, this is your baby...Its doesn't have to be perfectly built to the tee.. This is art representing something in the real world.. And as an actual operator of these cars, operating the beta version made me feel at home  ;D  prior to joining this site, i did a lot of work with MSTS and still do.. Check out this vid of an reskinned IRT car.. I call it the R39 http://youtu.be/4VeFWIYmQaA (http://youtu.be/4VeFWIYmQaA)

nice r39 cars lol i wish they were real

Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 12, 2012, 07:19:39 am
Look at seat's above of strikethrought

(http://smhnoob3.webs.com/R32StrikeThruOutSeat.jpeg)

Having Individual Number in Interior Cab

(http://smhnoob3.webs.com/R32IntCabIndNumDoor.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 12, 2012, 10:09:08 am
Having a label on Disability seats
(http://smhnoob3.webs.com/LabelDisabilitySeat.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Pacific385 on July 12, 2012, 03:44:57 pm
That's looking very good, keep up the good work.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 12, 2012, 05:24:46 pm
Front of r32
...
inside cab of me...i wore sunglasses  8)
(http://smhnoob3.webs.com/R32Front.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dj Hammers on July 12, 2012, 05:49:54 pm
Incredible! This just keeps getting better and better.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 12, 2012, 07:13:57 pm
i added a newspaper in interior cab lmao

(http://smhnoob3.webs.com/r32Intcabnewspaper.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 13, 2012, 03:18:07 pm
i make a mid roof...
(http://smhnoob3.webs.com/MidRoof1.jpeg)
(http://smhnoob3.webs.com/MidRoof2.jpeg)

in real world...
(http://smhnoob3.webs.com/ShowMidRoof1.jpg)
(http://smhnoob3.webs.com/ShowMidRoof2.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dj Hammers on July 13, 2012, 03:42:05 pm
Amazing! I love the detail you are putting in to it!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 14, 2012, 06:58:20 am
Amazing! I love the detail you are putting in to it!

thanks bro thats right i must bring proof pictures
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on July 14, 2012, 02:56:19 pm
I FREAKING LOVE IT, sry to ask but any chance of another beta? thnx
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 15, 2012, 06:37:45 pm
New R32 Version 1.4 coming soon

(http://smhnoob3.webs.com/NEWR32Updated1.jpeg)
(http://smhnoob3.webs.com/NEWR32Updated2.jpeg)
(http://smhnoob3.webs.com/NEWR32Updated3.jpeg)
(http://smhnoob3.webs.com/NEWR32Updated4.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Failsafe on July 15, 2012, 07:14:18 pm
This is really coming along well, Soon well have an updated R32, Thanks for your contribution and hard work Mudwrestle!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 15, 2012, 07:53:25 pm
realistic usa flag & individual numbers' plate
(http://smhnoob3.webs.com/R32IndNum.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dj Hammers on July 15, 2012, 08:11:17 pm
That's some amazing commitment right there, getting individial car number textures.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: YankeesPwnMets on July 15, 2012, 08:24:38 pm
Wow your PC can barely handle the train yet you keep on developing :p Amazing!

Now, time for feedback: I think that you could use a new floor texture. Also, as I've said before the interior roof needs to be curved a bit. In addition, is there another way to make the handrails sharper? The edges are look a bit pixelated..
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 16, 2012, 07:41:49 am
OpenBVE - Preview R32 Part 5 (http://www.youtube.com/watch?v=aDex-NzVxkM#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 16, 2012, 07:54:32 am
1. Wow your PC can barely handle the train yet you keep on developing :p Amazing!

2. Now, time for feedback: I think that you could use a new floor texture. Also, as I've said before the interior roof needs to be curved a bit. In addition, is there another way to make the handrails sharper? The edges are look a bit pixelated..

1. thanks bro
2. i will
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: r160bve on July 16, 2012, 09:07:26 am
Amazing work mud, btw is it me, or is there a bit to much space between the cars?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dj Hammers on July 16, 2012, 07:16:38 pm
Amazing work mud, btw is it me, or is there a bit to much space between the cars?
I agree, it seems like the space between the cars is way too large. Other than that, it is some amazing work!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: trainz2011 on July 16, 2012, 07:25:58 pm
Wow. This Look Amazing Can't Wait For it to come out.. by the way the space between the cars Is 2 much.. is the roll signs able to change ?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: coneyislandDFNQ on July 16, 2012, 07:30:00 pm
For a new developer your doing better work than I am. Please keep it up. Let this be an example to others that you can do great work also.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Failsafe on July 16, 2012, 07:41:46 pm
Amazing work two, But i Agree, Just like the R62A Cobra (BETA) Train, The Spacing Between Cars Is A Bit Big
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 17, 2012, 09:25:33 am
1. i know guys i will make curved ceiling

2. here is video
OpenBVE - Preview R32 Parts 6 (http://www.youtube.com/watch?v=StcNmlIwRjM#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Bombardier01800 on July 17, 2012, 10:26:34 am
Hey, you think you could make a set with the old M logo as well?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 17, 2012, 10:31:15 am
Hey, you think you could make a set with the old M logo as well?

i have old M logo pic lol
(http://smhnoob3.webs.com/R32MLogo.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Bombardier01800 on July 17, 2012, 10:33:43 am
i have old M logo pic lol
(http://smhnoob3.webs.com/R32MLogo.png)
cool lol
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on July 18, 2012, 10:13:14 pm
I have been watching this for a long time. Great job.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dj Hammers on July 18, 2012, 10:17:06 pm
i have old M logo pic lol
(http://smhnoob3.webs.com/R32MLogo.png)
Damn he has everything I swear lol
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on July 19, 2012, 06:38:33 pm
I just read through the entire project and I just want to say to Mudwrestle great job!!! You have my 2 thumbs up all the way.

Oh and I am just wondering how come this is not in the Official NYCTA Development Center. It is well deserved.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Orion V CNG #748 on July 19, 2012, 07:44:29 pm
The more you develop, the more sexier it gets. lol Keep going strong there MudWrestle and brilliant work !
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 19, 2012, 08:15:13 pm
thanks guys

(http://smhnoob3.webs.com/R32Ext2.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on July 19, 2012, 08:39:40 pm
AMAZING :o ;D I just have one thing, the end chains, they seem to skinny like silk, the middle bar especially is a thick piece of metal with 3 holes punched in it. like this (http://images.nycsubway.org/i36000/img_36474.jpg), and also the train itself i think should be a little more weathered especially the sides, roof, and underbody, due to the steel dust in the tunnels, but thats just me, other than that, I WANT!!!!!!!!
 ;D
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on July 19, 2012, 10:34:22 pm
AMAZING :o ;D I just have one thing, the end chains, they seem to skinny like silk, the middle bar especially is a thick piece of metal with 3 holes punched in it. like this;

 and also the train itself i think should be a little more weathered especially the sides, roof, and underbody, due to the steel dust in the tunnels, but thats just me, other than that, I WANT!!!!!!!!
 ;D

Remember what was said a couple pages ago, well  might as well say it because I am probably the only one who read through the entire thread today lol. The train should be as perfect as it can. Not that the weathering makes it not perfect, but I think that we should be looking for more of a shine if anything. Try to make it brand new.

I have to say I agree with the chains though.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 22, 2012, 11:37:13 am
new front texture
(http://smhnoob3.webs.com/NewR32FrontRearSkin.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ErrorMacro11 on July 22, 2012, 12:21:41 pm
the flipdot is too big mudwrestle
decrease it a bit
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Bombardier01800 on July 22, 2012, 04:53:58 pm
the flipdot is too big mudwrestle
decrease it a bit
It's just a little bright imo
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 22, 2012, 06:10:01 pm
(http://smhnoob3.webs.com/NEWR32Side1.jpeg)
(http://smhnoob3.webs.com/NEWR32Side2.jpeg)
(http://smhnoob3.webs.com/NEWR32Side3.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 22, 2012, 06:20:00 pm
(http://smhnoob3.webs.com/PreviewR32Pic1.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: r160bve on July 23, 2012, 08:08:07 am
This is Amazing, you feel like you are actually standing next to this thing first-hand. Great photo textures Mud, keep up the amazing work :)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on July 23, 2012, 01:06:53 pm
Mudwrestle's got GAME. Nice job chief.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: YankeesPwnMets on July 24, 2012, 09:34:52 am
Any possibility of working headlights?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 24, 2012, 11:11:32 am
Any possibility of working headlights?

my old r32 had headlights..

i removed it until everything is done then ill put it back on...
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 24, 2012, 05:16:32 pm
OpenBVE - R32 A train has been arrived on 207th St, Manhattan (http://www.youtube.com/watch?v=ARZcgrR7mVc#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on July 24, 2012, 05:30:09 pm
Mud are you releasing a third BETA? Or the final project alltogether.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: rstar on July 24, 2012, 07:42:24 pm
Is the R32 going to have brand new sounds?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Orion V CNG #748 on July 24, 2012, 08:06:04 pm
@ 0:58 were those really chains that hold up the train together?

Like the one in this pic
(http://images.nycsubway.org/i99000/img_99969.jpg)

If so thats amazing on how you did that. Even though I heard that when the trains are on a curve it would look weird when playing it
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 24, 2012, 08:20:18 pm
3-D Flipdot sign...

(http://smhnoob3.webs.com/NewRoofSign1.jpeg)
(http://smhnoob3.webs.com/NewRoofSign2.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 24, 2012, 08:29:40 pm
(http://smhnoob3.webs.com/NewR32Front3.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 24, 2012, 10:45:41 pm
OpenBVE - R32 F train arrived and left at West 8th St (http://www.youtube.com/watch?v=qW_WvmLtoRg#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dj Hammers on July 25, 2012, 04:49:43 am
@ 0:58 were those really chains that hold up the train together?

Like the one in this pic
(http://images.nycsubway.org/i99000/img_99969.jpg)

If so thats amazing on how you did that. Even though I heard that when the trains are on a curve it would look weird when playing it
Those (which are called pantograph gates) do not hold the train together, the couplers do that. The pantograph gates create a barrier to prevent passengers from falling to the tracks between cars.

On the R32s, the pantograph gates are only attached to one side of each car. Because of this, their movement is determined by the car they
are connected to. On cars such as the R46, R160, and R68, pantograph gates are not used, and springs are used instead. These springs are attached
to both cars, and tend to swing around. Because of this, simulating these springs is more difficult.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Orion V CNG #748 on July 25, 2012, 05:06:46 am
lol I wasnt talking about that. If you look closely @ 0:58 there are chains. not talking about the pantograph gates.

Heres an image at 0:58 on the video
(http://s15.postimage.org/f01l8ts17/img_99969.jpg)

Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dj Hammers on July 25, 2012, 06:59:01 am
I see what you are referring to. They basically serve the same purpose as the pantograph gates for people crossing between cars. I wonder how mudwrestle implemented them...

Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 26, 2012, 08:30:03 am
OpenBVE - R32 A train passed 81st Manhattan (http://www.youtube.com/watch?v=_z6X4JdRIhY#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Orion V CNG #748 on July 26, 2012, 09:06:52 am
Looking good! 8) Keep it strong there developing this fantastic piece of work!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 26, 2012, 12:02:49 pm
r32's truck pivot n coupler

(http://smhnoob3.webs.com/R32TP1.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Pacific385 on July 26, 2012, 12:06:43 pm
The truck and pivot look good. The forward headlights seem a bit too big
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 26, 2012, 12:28:20 pm
(http://smhnoob3.webs.com/R32TP2.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 26, 2012, 03:29:20 pm
new r32 floor

(http://smhnoob3.webs.com/NewR32Floor.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Pegasusleos4 on July 26, 2012, 05:05:20 pm
I am so speechless, nice job djhammer, and mudwrestle. Can't wait  :) ;D
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 26, 2012, 05:35:57 pm
I am so speechless, nice job djhammer. Can't wait  :) ;D

R32 belongs to me and no teams work wit me....


R38 belongs to djhammer and other his teams


dont be confused bro lol


R32 is almost done then final release....
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on July 26, 2012, 07:41:18 pm
new r32 floor

(http://smhnoob3.webs.com/NewR32Floor.jpeg)

It looks amazing! I absolutely love it!  ;D

Before you release it though, you should do something about the window frames and the size of the door windows, and also deal with those black outlines of the windows and handrails.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Simon on July 26, 2012, 09:05:14 pm
It looks amazing! I absolutely love it!  ;D

Before you release it though, you should do something about the window frames and the size of the door windows, and also deal with those black outlines of the windows and handrails.

What's wrong with the size of the door windows? He got it perfect.

Great job and I can't wait for its release!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on July 26, 2012, 09:54:51 pm
Great job mud.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on July 26, 2012, 10:08:32 pm
What's wrong with the size of the door windows? He got it perfect.

Great job and I can't wait for its release!

To me, they seem to be not long enough. I think they should extend just a tiny bit further down, just take a look at the photo that Orion V CNG posted.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Simon on July 27, 2012, 07:21:00 am
To me, they seem to be not long enough. I think they should extend just a tiny bit further down, just take a look at the photo that Orion V CNG posted.

Nope, he got it on the mark.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 27, 2012, 02:16:35 pm
(http://smhnoob3.webs.com/NewR32Front4.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on July 27, 2012, 07:35:31 pm
Keep it up Mud, keep it up. Everybody on the NYCTF loves your work.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 31, 2012, 07:26:07 am
after i am completely building it, ill beta testing myself...

if i see some errors or missing textures then my project will continue until everything is finished...

...

if i see perfect everything then ill release here...

proceed working...
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: [CT1660] on July 31, 2012, 07:34:40 pm
and also deal with those black outlines of the windows and handrails.

those black outlines only appear within objectviewer and not the game itself...
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 31, 2012, 08:52:45 pm
those black outlines only appear within objectviewer and not the game itself...

thats right...

check out my panel

(http://smhnoob3.webs.com/R32Panel.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Orion V CNG #748 on July 31, 2012, 09:00:07 pm
Panel looks a bit decent. Although it could use a new pantograph gate for it. The one your using is quite old.. and also the right side of the panel could use a bit of a touch up. Im just saying but you can do what ever you want with it.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 31, 2012, 10:03:11 pm
better? @ pantograph gate
(http://smhnoob3.webs.com/R32Panel2.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: nelson3001 on July 31, 2012, 11:17:01 pm
I made a panel a while ago but couldn't finish it because of texture shortages.
(http://s11.postimage.org/lh9loiwv7/Panel.png) (http://postimage.org/)
As you can see I had to use a different power controller for this cab (some R32's had this).
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: error46146 on August 01, 2012, 12:30:42 am
better? @ pantograph gate
(http://smhnoob3.webs.com/R32Panel2.jpeg)

What's with the newspaper?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: YankeesPwnMets on August 01, 2012, 12:54:45 am
The brake handle could use a bit of optimization..
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 01, 2012, 07:48:16 am
(http://smhnoob3.webs.com/R32Panel3.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 02, 2012, 08:26:58 am
having seats' shadow....
(http://smhnoob3.webs.com/R32Interior10.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 02, 2012, 10:44:41 am
OpenBVE - Preview R32 Parts 7 (http://www.youtube.com/watch?v=7eRAtGGyDGk#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 04, 2012, 04:56:15 pm
interior cab
(http://smhnoob3.webs.com/extintcab1.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 05, 2012, 07:05:04 am
i need your help for pick one r32 interior floor

they dont fit my heart...

(http://smhnoob3.webs.com/choosefloor.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: YankeesPwnMets on August 05, 2012, 07:13:48 am
I like C
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Orion V CNG #748 on August 05, 2012, 10:23:56 am
I agree with Yankees. C is the best one, The other two are too pale
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Pegasusleos4 on August 05, 2012, 12:11:42 pm
C is the best one
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on August 05, 2012, 12:52:59 pm
Put me on [C] too. I like that.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 06, 2012, 10:12:49 am
Allright alot of people chose C so C is won

Start working on curved ceiling, resize silver doors' rectangle, upgrade exterior storm doors, and upgrade light ceiling
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: error46146 on August 06, 2012, 10:48:45 am
Nice interior.. and yea C looks like the best texture since it lines up pretty nicely with the lights.

Keep up the good work!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 06, 2012, 05:48:48 pm
curved ceiling
(http://smhnoob3.webs.com/CurvedCeiling.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Threxx1 on August 06, 2012, 07:07:18 pm
Put me down on C.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: 8thavelcl on August 06, 2012, 07:27:54 pm
I cant wait! You have put so much work in this, and it keeps getting better and better! Keep it up Mudwrestle!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on August 06, 2012, 09:44:37 pm
Wow the detail in this is looking like the same quality detail we had in the R46. I like the focus on the interior. Keep up the good work Mud.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 07, 2012, 12:07:57 am
wat do u think?
(http://smhnoob3.webs.com/CurvedCeiling2.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: vince_black on August 07, 2012, 06:40:43 am
Wow, looks great! Can't wait too ;-)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on August 07, 2012, 02:11:41 pm
It looks absolutely amazing, as usual  ;) Just goes to show that it does not matter how experienced or senior of a developer you are, but as long as you have a passion for your work, you can make some very high quality stuff.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: YankeesPwnMets on August 08, 2012, 07:32:14 am
Are the poles 3D? They almost look flat...
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 08, 2012, 09:30:59 am
Are the poles 3D? They almost look flat...
I will make 3-D poles...
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Mr Railfan on August 08, 2012, 10:44:24 am
Just to give you a heads up : the 3D poles kill Frame Rate. take a look at the R46 if you don't believe me.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: 8thavelcl on August 08, 2012, 11:42:31 am
Yeah-I would rather have 2D Poles than a lagging R32.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 08, 2012, 01:10:50 pm
Just to give you a heads up : the 3D poles kill Frame Rate. take a look at the R46 if you don't believe me.
I already know that and i will try other way to make 3-D poles codes ...

 no problem and thanks for remind me bro  :)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 08, 2012, 10:21:46 pm
(http://smhnoob3.webs.com/R32Interior11.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 09, 2012, 11:06:08 am
New R32 Roof :)

(http://smhnoob3.webs.com/R32Roof10.jpeg)
(http://smhnoob3.webs.com/R32Roof11.jpeg)
(http://smhnoob3.webs.com/R32Roof12.jpeg)

Proof Picture:
(http://smhnoob3.webs.com/RealLifeRoof.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Pacific385 on August 09, 2012, 11:17:44 am
Looking good. I believe you got it all covered in this train
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Orion V CNG #748 on August 09, 2012, 11:22:41 am
Looks like it turning to be the real thing. From the real R32 to the OpenBVE version of the R32 it seems to have everything there.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 09, 2012, 11:32:26 am
(http://smhnoob3.webs.com/R32Exterior10.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on August 09, 2012, 11:53:37 am
It looks really good! Everything is perfect except for the window frames. I do not care if anyone shoots down my suggestion of improving the window frames, but I have honest belief that they need a bit of work.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Orion V CNG #748 on August 09, 2012, 12:05:49 pm
Yeah. the interior window frames looks a bit smaller than the ones on the exterior.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 09, 2012, 12:59:35 pm
It looks really good! Everything is perfect except for the window frames. I do not care if anyone shoots down my suggestion of improving the window frames, but I have honest belief that they need a bit of work.

i know i hold window frames and panel until i finished fixing everything else...

thanks for helping me out :)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Mr Railfan on August 09, 2012, 02:53:47 pm
you also need to change the underbody , it looks like you took it from an NTT.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on August 09, 2012, 10:48:41 pm
The fellas on NYCTF can't get enough. Great job Mud.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 14, 2012, 01:44:19 pm
(http://smhnoob3.webs.com/R32Interior15.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 14, 2012, 02:26:38 pm
what do u think?
(http://smhnoob3.webs.com/R32FlipDot2.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on August 14, 2012, 02:30:40 pm
I think splendid job.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 15, 2012, 10:42:43 am
okay im going to release my r32 set 4,6,8,10 cars now

Do not complaining to me about Incorrect exterior or whatever....

Download:

http://mudbvedays.webs.com/ (http://mudbvedays.webs.com/)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 15, 2012, 01:15:54 pm
How to change flipdotsign/rollsign

Press 2 button to start changing the Flipdotsign if you press 2 button again then stop changing the Flipdotsign

Press 8 button to start scrolling the NR rollsign if you press 8 button again then stop changing the NR rollsign

Press 9 button to start scrolling the SR rollsign if you press 9 button again then stop scrolling the SR rollsign

Press 0 button to start scrolling the Route rollsign if you press 0 button again then stop scrolling the Route rollsign

i will upgrade my r32 again very soon....

having fun with my r32 :)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: 8thavelcl on August 15, 2012, 01:44:13 pm
In the next one can you make the speedometer a MPH?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 15, 2012, 01:53:34 pm
In the next one can you make the speedometer a MPH?

wat do u mean?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: 8thavelcl on August 15, 2012, 02:09:03 pm
wat do u mean?
Right now the speed gauge is in kilometers, I am asking for miles per hour.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Orion V CNG #748 on August 16, 2012, 10:59:49 pm
Right now the speed gauge is in kilometers, I am asking for miles per hour.
That could be easily done by going to the panel.cfg file, opening it w/ notepad or wordpad, and simply adding the code "Unit=1" in the [DigitalIndicator] column
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: 8thavelcl on August 16, 2012, 11:11:54 pm
Wow thanks i never knew you could do that.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: TJay1724 on August 17, 2012, 07:04:45 pm
Unbelievably beautiful train!! A few things I need to point out. 1. The flipdot is way too dark. You can barely see it. It's not that way in real life. 2. The braking has way too much of a delay. You should fix that. 3. The doors closing is a bit slow and is way behind the door close sound. You should correct that. Other than that. OMG!!! Excellent train!!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Fox-179 on August 18, 2012, 09:35:15 pm
Great work!! Lovely!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Simon on August 19, 2012, 11:25:01 pm
You're killing it! Keep at it!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on August 20, 2012, 12:10:33 am
Beautiful work Mudwrestle.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 20, 2012, 11:08:54 am
Thanks everyone ;D
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Fan Railer on August 24, 2012, 07:51:41 pm
If anyone is interested, here is my take on Mudwrestle's R32. I think it operates really nicely, and it doesn't lag as badly as the R46. The only thing I have done with it so far is change the display to MPH, added the MC sounds from the R38, and increased the top speed slightly. All of these things you can easily do yourself if you know how.
Enjoy:
OpenBVE Exclusive: Showcasing Mudwrestle's New R32 for OpenBVE (New York City Subway) (http://www.youtube.com/watch?v=GeTTCe7rB0o#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on August 24, 2012, 10:36:58 pm
As I said on NYCTF, I am in 100% agreement with Fan Railer.

Quote from: Brighton Express
I agree. The R38 sounds should be added. DJ Hammers did an excellent job on the sounds for that train. The screeching of the brakes is what I love the best. Excellent suggestion Fan Railer.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Fan Railer on August 25, 2012, 12:32:31 am
As I said on NYCTF, I am in 100% agreement with Fan Railer.
Thank you Brighton =) Here is another video of Mud's train, this time, shortened by me to 2 cars to further increase FPS and to run on the Franklin shuttle. Enjoy the pivoting trucks and the never ending spinning of the wheel cap paint.
OpenBVE Exclusive Mudwrestle's New R32 Running on Franklin Ave Shuttle (Closeups) (http://www.youtube.com/watch?v=7tM-xlp5JOg#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dr. Subway18 on August 25, 2012, 03:44:00 am
very nice job on the train mudwrestle
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: rstar on August 25, 2012, 08:23:41 am
 R32 phase II
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 25, 2012, 12:03:56 pm
R32 has been little updated:

1. Truck Pivots moving
2. 1 Car not moving
3. Found some missing textures of cars

havin fun...
http://www.mediafire.com/download.php?i3dace9a8bdxr5f (http://www.mediafire.com/download.php?i3dace9a8bdxr5f)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Threxx1 on August 25, 2012, 02:11:19 pm
R32 has been little updated:

1. Truck Pivots moving
2. 1 Car not moving
3. Found some missing textures of cars

havin fun...
http://www.mediafire.com/download.php?i3dace9a8bdxr5f (http://www.mediafire.com/download.php?i3dace9a8bdxr5f)

Will you be taking Fan Railer's suggestions??
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: WestEndMan on August 25, 2012, 05:06:55 pm
Loved testing it out. Cant seem to get the Rollsigns to stop scrolling. When I brake, route scrollsign scrolls without stopping unless I move & then the middle destination sign moves. No way to change the dot sign. Also, MPH is reading in KPH. Other than that, great job.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on August 25, 2012, 05:26:36 pm
i have a problem with the exterior, specifically the sides and the trucks, they are gray and dark gray squares for windows. and theres a white wall blocking the trucks on the side. the front, back, and roof textures go threw. anyone else have this problem? thnx other than that love the train!
(http://i498.photobucket.com/albums/rr345/justinsz/NewBitmapImage14.jpg)
(http://i498.photobucket.com/albums/rr345/justinsz/NewBitmapImage15.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: [CT1660] on August 25, 2012, 05:38:47 pm
i have a problem with the exterior, specifically the sides and the trucks, they are gray and dark gray squares for windows. and theres a white wall blocking the trucks on the side. the front, back, and roof textures go threw. anyone else have this problem? thnx other than that love the train!

Your graphics card doesn't support high resolution textures.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 25, 2012, 05:50:27 pm
i have a problem with the exterior, specifically the sides and the trucks, they are gray and dark gray squares for windows. and theres a white wall blocking the trucks on the side. the front, back, and roof textures go threw. anyone else have this problem? thnx other than that love the train!
(http://i498.photobucket.com/albums/rr345/justinsz/NewBitmapImage14.jpg)
(http://i498.photobucket.com/albums/rr345/justinsz/NewBitmapImage15.jpg)

i think u r using newest openbve

try use old openbve versions to see if work or not...

same as nightmare403s plm

because he was using newest version so i told him to use old openbve version and its worked for him o.0
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: HijauKuda on August 25, 2012, 06:32:34 pm
This exterior has several textures that are dimensioned greater than 2048 pixels.
I suspect an older/lesser GPU or "integrated graphics" that can not handle large images and displays white space instead.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 25, 2012, 10:07:40 pm
Loved testing it out. Cant seem to get the Rollsigns to stop scrolling. When I brake, route scrollsign scrolls without stopping unless I move & then the middle destination sign moves. No way to change the dot sign. Also, MPH is reading in KPH. Other than that, great job.

How to change flipdotsign/rollsign

Press 2 button to start changing the Flipdotsign if you press 2 button again then stop changing the Flipdotsign

Press 8 button to start scrolling the NR rollsign if you press 8 button again then stop changing the NR rollsign

Press 9 button to start scrolling the SR rollsign if you press 9 button again then stop scrolling the SR rollsign

Press 0 button to start scrolling the Route rollsign if you press 0 button again then stop scrolling the Route rollsign
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Fan Railer on August 25, 2012, 11:01:09 pm
i have a problem with the exterior, specifically the sides and the trucks, they are gray and dark gray squares for windows. and theres a white wall blocking the trucks on the side. the front, back, and roof textures go threw. anyone else have this problem? thnx other than that love the train!
(http://i498.photobucket.com/albums/rr345/justinsz/NewBitmapImage14.jpg)
(http://i498.photobucket.com/albums/rr345/justinsz/NewBitmapImage15.jpg)
What route is that? 0.o
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Fan Railer on August 26, 2012, 12:24:36 pm
By the way, does anyone have plans on creating more realistic westinghouse propulsion sounds?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: WestEndMan on August 26, 2012, 12:53:27 pm
How to change flipdotsign/rollsign

Press 2 button to start changing the Flipdotsign if you press 2 button again then stop changing the Flipdotsign

Press 8 button to start scrolling the NR rollsign if you press 8 button again then stop changing the NR rollsign

Press 9 button to start scrolling the SR rollsign if you press 9 button again then stop scrolling the SR rollsign

Press 0 button to start scrolling the Route rollsign if you press 0 button again then stop scrolling the Route rollsign


I understand that, but the signs scroll on their own. No button stops or starts them. The signs move with the movement of throttle and brake positions. Am I missing a file or is this part of the beta testing?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 26, 2012, 01:05:50 pm

I understand that, but the signs scroll on their own. No button stops or starts them. The signs move with the movement of throttle and brake positions. Am I missing a file or is this part of the beta testing?

(http://smhnoob.webs.com/img_76451_logitech-wii-keyboard_450x360.jpg)

or

try twice press button?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on August 26, 2012, 03:00:38 pm
i have a problem with the exterior, specifically the sides and the trucks, they are gray and dark gray squares for windows. and theres a white wall blocking the trucks on the side. the front, back, and roof textures go threw. anyone else have this problem? thnx other than that love the train!
(http://i498.photobucket.com/albums/rr345/justinsz/NewBitmapImage14.jpg)
(http://i498.photobucket.com/albums/rr345/justinsz/NewBitmapImage15.jpg)

Graphics can't handle it. This happens to me with the R46.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: peacemak3r on August 26, 2012, 04:20:40 pm
i think u r using newest openbve

try use old openbve versions to see if work or not...

same as nightmare403s plm

because he was using newest version so i told him to use old openbve version and its worked for him o.0

I'm using the newest version of openBVE and your train comes out perfectly.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: nyctrman on August 26, 2012, 04:26:25 pm
to make it work since i had the issue back then but now i dont you have to resize the pictures thats over 1500 it worked for me well
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: HijauKuda on August 26, 2012, 05:56:40 pm
Agree with nyctrman.  Try rescaling the larger textures down to 2048pixels or less.
I've had to do this for several trains so they would display on a cheap notebook with ATI graphics.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Simon on August 26, 2012, 11:13:28 pm

I understand that, but the signs scroll on their own. No button stops or starts them. The signs move with the movement of throttle and brake positions. Am I missing a file or is this part of the beta testing?

I got the same problem. The reason is the ATS activation, cause the signs don't start scrolling until the ATS turns on, and then when it does, you can't stop it from scrolling.

Does anybody have a fix? Or at least a FULL LIST of the necessary files required to achieve this scrolling effect. Cause I modified the train.dat file and it might have something to do with it not working.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: [CT1660] on August 26, 2012, 11:21:03 pm
Here's my copy of the oskari plugin, which is working properly:

http://www.mediafire.com/?oloqcl0i09qs6xf (http://www.mediafire.com/?oloqcl0i09qs6xf)


On your #DEVICE section of the train.dat, make sure the first number is 1, or just copy and paste this replacing the whole #DEVICE SECTION

For DoorOpenMode and DoorCloseMode:
0 = Auto with manual override
1 = Auto only
2 = Manual only.

Code: [Select]
#DEVICE
1              ; Ats
0              ; Atc
0              ; Eb
0              ; ConstSpeed
0              ; HoldBrake
-1             ; ReAdhesionDevice
0              ; Reserved (not used)
0              ; PassAlarm
2              ; DoorOpenMode
2              ; DoorCloseMode
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 27, 2012, 12:58:19 pm
Thanks man! It was the ATS, everything seems to be working, except for the flipdots. Pressed 2 and nothing is happening. Is there a separate fix for this?

Hmm did u try 2 times press 2 button ?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: r160bve on August 27, 2012, 05:06:04 pm
Excellent job mud, the most HD train there is :)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: [CT1660] on August 27, 2012, 06:07:25 pm
Thanks man! It was the ATS, everything seems to be working, except for the flipdots. Pressed 2 and nothing is happening. Is there a separate fix for this?

Just look at the pluginstate index provided with the file and remap the keys if necessary on the train's .animated files.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Threxx1 on August 28, 2012, 01:20:32 pm

I understand that, but the signs scroll on their own. No button stops or starts them. The signs move with the movement of throttle and brake positions. Am I missing a file or is this part of the beta testing?

This normally happens on a Mac computer. The scrolling is only Windows supported.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 29, 2012, 09:38:52 am
I'm using the newest version of openBVE and your train comes out perfectly.

Oh.....no wonder o.0

Threxxx, yeah i think u r right since chris made separate file one for mac and one for window

Maybe so
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Threxx1 on August 30, 2012, 07:25:30 pm
Here's my copy of the oskari plugin, which is working properly:

http://www.mediafire.com/?oloqcl0i09qs6xf (http://www.mediafire.com/?oloqcl0i09qs6xf)


On your #DEVICE section of the train.dat, make sure the first number is 1, or just copy and paste this replacing the whole #DEVICE SECTION

For DoorOpenMode and DoorCloseMode:
0 = Auto with manual override
1 = Auto only
2 = Manual only.

Code: [Select]
#DEVICE
1              ; Ats
0              ; Atc
0              ; Eb
0              ; ConstSpeed
0              ; HoldBrake
-1             ; ReAdhesionDevice
0              ; Reserved (not used)
0              ; PassAlarm
2              ; DoorOpenMode
2              ; DoorCloseMode

How would you add this to the code?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 30, 2012, 08:24:03 pm
How would you add this to the code?

use train.dat<
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Threxx1 on September 01, 2012, 09:19:34 am
I got it. I had to save to my desktop first...  :P
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 01, 2012, 12:39:30 pm
I got it. I had to save to my desktop first...  :P

good
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 04, 2012, 03:28:35 pm
R32 GE Rebuild
(http://mudbvedays.webs.com/R32GERebuild.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 04, 2012, 04:13:19 pm
R32 GE Rebuild Disability Seat Pole

(http://mudbvedays.webs.com/R32GERebuildInterior1.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: SubwayTrainOperator5 on September 04, 2012, 04:44:30 pm
Looks great. And the GE R32's also had backlit interior ads, remember to add those  ;)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 04, 2012, 07:31:43 pm
(http://mudbvedays.webs.com/R32GERebuildInterior2.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 04, 2012, 09:34:03 pm
wat do u think?
(http://mudbvedays.webs.com/R32GERebuildInterior3.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: 8thavelcl on September 04, 2012, 09:55:57 pm
I must say it looks both exquisite and excellent. On a different note, do plan to do a Pre-GOH version of the R32?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 04, 2012, 10:07:47 pm
I must say it looks both exquisite and excellent. On a different note, do plan to do a Pre-GOH version of the R32?

well i dropped that idea and gave to someone....

OpenBVE - R32 GE Rebuild Coming Soon (http://www.youtube.com/watch?v=UKpHqXexILM#ws)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: YankeesPwnMets on September 05, 2012, 01:30:42 am
Very, very nice.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 05, 2012, 06:31:42 pm
look at those poles ceiling
(http://mudbvedays.webs.com/R32GERebuildInterior4.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 06, 2012, 05:57:17 am
(http://mudbvedays.webs.com/R32GERebuildDisabilityArea1.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: coneyislandDFNQ on September 07, 2012, 11:47:30 am
MUDWRESTLE very good!!!!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 07, 2012, 06:51:09 pm
what do u think of r32 ge rebuild ceiling?  ;)
(http://mudbvedays.webs.com/R32GERebuildCeiling.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 07, 2012, 07:28:48 pm
(http://mudbvedays.webs.com/R32GERebuildFloor.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Pacific385 on September 07, 2012, 07:41:41 pm
(http://mudbvedays.webs.com/R32GERebuildFloor.jpeg)
I just have one minor suggestion, try taking out the black outline on the poles otherwise excellent job
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dj Hammers on September 07, 2012, 07:45:37 pm
in case you need it:

(http://i.imgur.com/FqI4p.jpg)
(http://i.imgur.com/kefoO.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 07, 2012, 09:01:31 pm
I just have one minor suggestion, try taking out the black outline on the poles otherwise excellent job

No0Oo0o

black outline is only appear at object viewer except openbve....
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 08, 2012, 08:10:20 am
OpenBVE - R32 GE Rebuild Part 1 (http://www.youtube.com/watch?v=OH5Gf3YHlZg#ws)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: YankeesPwnMets on September 09, 2012, 12:22:38 am
Hey mud, I can't get the rollsign to scroll even after the fix. Any help?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 09, 2012, 06:11:34 am
Hey mud, I can't get the rollsign to scroll even after the fix. Any help?

hmm try twice times press button?

or

look at this

Problem:
I got the same problem. The reason is the ATS activation, cause the signs don't start scrolling until the ATS turns on, and then when it does, you can't stop it from scrolling.

Does anybody have a fix? Or at least a FULL LIST of the necessary files required to achieve this scrolling effect. Cause I modified the train.dat file and it might have something to do with it not working.

Answer:
Just look at the pluginstate index provided with the file and remap the keys if necessary on the train's .animated files.

OR

Answer:
Twice times press button....
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: YankeesPwnMets on September 09, 2012, 11:47:00 am
I tried spamming the 2 key and no response...

Heres my Pluginstate file

Code: [Select]
Pluginstate[53]  / ats53  = Third Rail Gap
Pluginstate[51]  / ats51  = Tripcock
Pluginstate[98]  / ats98  = 2 key
Pluginstate[97]  / ats97  = 3 key
Pluginstate[107] / ats107 = 4 key
Pluginstate[102] / ats102 = 5 key
Pluginstate[104] / ats104 = 6 key
Pluginstate[93]  / ats93  = 7 key
Pluginstate[99]  / ats99  = 8 key
Pluginstate[100] / ats100 = 9 key
Pluginstate[101] / ats101 = 0 key
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 09, 2012, 12:53:55 pm
I tried spamming the 2 key and no response...

Heres my Pluginstate file

Code: [Select]
Pluginstate[53]  / ats53  = Third Rail Gap
Pluginstate[51]  / ats51  = Tripcock
Pluginstate[98]  / ats98  = 2 key
Pluginstate[97]  / ats97  = 3 key
Pluginstate[107] / ats107 = 4 key
Pluginstate[102] / ats102 = 5 key
Pluginstate[104] / ats104 = 6 key
Pluginstate[93]  / ats93  = 7 key
Pluginstate[99]  / ats99  = 8 key
Pluginstate[100] / ats100 = 9 key
Pluginstate[101] / ats101 = 0 key



Hmm try replace them in 3559-3568.animated file


Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: nyctrman on September 10, 2012, 01:53:16 am
an easier way is just user train editor and disable the ATS from there and thats it
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 12, 2012, 12:19:15 am
(http://mudbvedays.webs.com/R32GERebuildRearRoofSign2.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: coneyislandDFNQ on September 12, 2012, 09:56:40 am
The ATS was coded on the train for a reason, in fact any more trains being developed will have that feature.

Why?

Simple reason. When doing a run, we want to implement realism in the routes being created which includes trip arms created by BStlyes. These trip arms are supposed to trip the train in case you over run a signal. To solve the issue with the roll sign merely lies inside the coding where you can separate which code does what without interferring with other coding.

A great example is Chris's R33ML.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 12, 2012, 11:08:49 am
Yep thats why we are here
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: NYC-T-Driver on September 12, 2012, 01:26:03 pm
Looking Nice Mud, keep up The Good Work
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 13, 2012, 05:49:24 am
i cant find r32 ge rebuild mta logo so i made my own one...

tell me what do u think?

(http://mudbvedays.webs.com/R32GeRebuildLogoPlates%20(2).jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 14, 2012, 06:51:38 pm
new rollsign ....

tell me wat do u think :)

(http://mudbvedays.webs.com/NewR32IntRollsign.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Threxx1 on September 14, 2012, 09:18:04 pm
Will a "fixed ATS" version come out soon? Just asking...
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 15, 2012, 12:23:17 am
R32 Door Indicator...

(http://mudbvedays.webs.com/R32DoorIndicator1%20%282%29.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: NYC-T-Driver on September 15, 2012, 02:28:46 am
Very Nice @ MUD, keep up the good work
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 15, 2012, 07:15:33 am
(http://mudbvedays.webs.com/R32DoorIndicator2.jpeg)
(http://mudbvedays.webs.com/R32DoorIndicator3.jpeg)
(http://mudbvedays.webs.com/R32DoorIndicator4.jpeg)
(http://mudbvedays.webs.com/R32DoorIndicator5.jpeg)

Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: 8thavelcl on September 15, 2012, 07:46:27 am
It looks really good! So life-like. One question though, shouldnt the arial numbers (3559,3560...) on those numberplates be a lot bolder?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 15, 2012, 11:13:36 am
It looks really good! So life-like. One question though, shouldnt the arial numbers (3559,3560...) on those numberplates be a lot bolder?

Well i will replace them later...

New numbers are 3880-3890 and not 3559 - 3568 anymore
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 16, 2012, 11:33:50 am
(http://mudbvedays.webs.com/R32GEREBUILDSIDE2.jpeg)
(http://mudbvedays.webs.com/R32GEREBUILDSIDE3.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 16, 2012, 12:13:54 pm
OpenBVE - R32 GE Rebuild Preview Part 2 (http://www.youtube.com/watch?v=ILaxJYIG5f8#ws)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 16, 2012, 11:17:41 pm
Doors' Ceiling
(http://mudbvedays.webs.com/R32DoorCeiling.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 17, 2012, 01:38:27 pm
new side

(http://mudbvedays.webs.com/R32GEREBUILDSIDE1.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: TJay1724 on September 17, 2012, 06:31:43 pm
The train is coming along beautifully. One thing I wanted to point out though. In your video, I noticed that the coupler that connects the cars together is way too long. It shouldn't extend that far out from the tip of the car. That's why there was too much space between the cars on the R 32 you released. You should shorten that so that the cars are much closer together. The pantographs should be close to touching each other.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 18, 2012, 06:33:18 am
The train is coming along beautifully. One thing I wanted to point out though. In your video, I noticed that the coupler that connects the cars together is way too long. It shouldn't extend that far out from the tip of the car. That's why there was too much space between the cars on the R 32 you released. You should shorten that so that the cars are much closer together. The pantographs should be close to touching each other.

yeah i notice and thanks for feedback
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 18, 2012, 09:17:51 am
New UnderBody

(http://mudbvedays.webs.com/R32GERebuildNewBody.jpeg)

New Doors Wall

(http://mudbvedays.webs.com/R32GERebuildDoorWall.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Pegasusleos4 on September 18, 2012, 01:11:43 pm
Speechless  :o , can't wait for this train to be released. Nice job Mudwrestle, keep up the good work.  :) :D ;D
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: C40LF 801 on September 18, 2012, 01:47:41 pm
Damn this looks much more realistic than the actual train itself LMAO! I can't wait to drive this on the A line. Keep up the amazing work. Btw, is there an E line under development cause the old one has too much errors?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on September 18, 2012, 06:44:52 pm
Damn this looks much more realistic than the actual train itself LMAO! I can't wait to drive this on the A line. Keep up the amazing work. Btw, is there an E line under development cause the old one has too much errors?

The old one seems pretty nice to me.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 18, 2012, 10:20:19 pm
The old one seems pretty nice to me.

why?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: CTAredlineNYCTace on September 19, 2012, 01:58:07 am
That could be easily done by going to the panel.cfg file, opening it w/ notepad or wordpad, and simply adding the code "Unit=1" in the [DigitalIndicator] column
Where do you add (unit=1) exactly? Does it go before the end of the coding category or at the end underneath everything so it would be the last thing you would see in the digital indicator category?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: CTAredlineNYCTace on September 19, 2012, 02:31:27 am
The old one seems pretty nice to me.
Personally I could also go for a better E Line. Not to be dissing the current one but with all the recent upgrades in tech and trains, don't you guys think its time for some revisions on some of the existing routes? I-E: E,G (queensbound),L,7,NB Franklin ave shuttle. Please don't take this wrong or out of context because I love everything you guys do. I just every so often have a thought cross my mind about the routes and trains and I simply out spoken. That's why I said the other day I so wish I was back out there in New York so I could learn some of this stuff and that way I could be helping you guys to the best of my abilities. You guys have done what I've been thinking in my mind since I was about 4 years old. Which is bringing an aspect of personalism to rail fanning. Bravo! :) ;) :D ;D
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: CTAredlineNYCTace on September 19, 2012, 02:47:15 am
Oh and one more thing and then tomorrows another day.lol. Great work on the train Mudwrestle! This train is extrodinarily awesome. It's so real to me,that I'm 916 miles away from New York but when I run that train it's like I'm right back there. I so love this train man. Keep up the great work!...............All of you guys.  ;)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Threxx1 on September 19, 2012, 02:46:54 pm
I think the Franklin Avenue Shuttle should be tackled by someone... it is a simple route, and the skeleton is there already.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 19, 2012, 05:04:34 pm
Oh and one more thing and then tomorrows another day.lol. Great work on the train Mudwrestle! This train is extrodinarily awesome. It's so real to me,that I'm 916 miles away from New York but when I run that train it's like I'm right back there. I so love this train man. Keep up the great work!...............All of you guys.  ;)

Thanks :-)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on September 19, 2012, 05:58:34 pm
why?

I don't see anything wrong with the (E) as it stands right now. Sure it could use an update, but nothing too serious. I am going to keep this route because it is the only one that I can play without mega-lag on.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 19, 2012, 06:23:07 pm
I don't see anything wrong with the (E) as it stands right now. Sure it could use an update, but nothing too serious. I am going to keep this route because it is the only one that I can play without mega-lag on.

oh i thought u was talking about my old r32 but u was talkin about E route lol my bad but yea old E route is my favorite...

i dont know if new E route similar to old E route....
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on September 19, 2012, 07:45:02 pm
oh i thought u was talking about my old r32 but u was talkin about E route lol my bad but yea old E route is my favorite...

i dont know if new E route similar to old E route....

Haha its cool man.

I think the new (E) will just have updated objects, timers, and static trains. Might even pull an (F) and put some 8 Av Express in there, and Queens Blvd Local.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: CTAredlineNYCTace on September 19, 2012, 10:33:01 pm
I think the Franklin Avenue Shuttle should be tackled by someone... it is a simple route, and the skeleton is there already.
I agree.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: CTAredlineNYCTace on September 19, 2012, 10:34:51 pm
oh i thought u was talking about my old r32 but u was talkin about E route lol my bad but yea old E route is my favorite...

i dont know if new E route similar to old E route....
What E route are you talking about? The EE?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 20, 2012, 01:27:37 pm
What E route are you talking about? The EE?

....

Regular E route i mean
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: CTAredlineNYCTace on September 20, 2012, 03:09:31 pm
Oh ok I see. So you guys don't think that we couldn't get the E and the L routes to look somewhat like the D,or the F, or even the Q? (just examples) You know, kind of make the turns and curved tracks smoother and curvier instead of the curves looking like stright rails laid in the direction of the turn? How about some stairs,benches and other objects ect.....
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Mr Railfan on September 20, 2012, 03:31:04 pm
That is because the routes are 1st generation and where publshed nearly 10 years ago for bve. Their updated counterparts are being worked on. Please view the NYCT Projects section for more info on those and other projects.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dj Hammers on September 20, 2012, 04:46:25 pm
Oh ok I see. So you guys don't think that we couldn't get the E and the L routes to look somewhat like the D,or the F, or even the Q? (just examples) You know, kind of make the turns and curved tracks smoother and curvier instead of the curves looking like stright rails laid in the direction of the turn? How about some stairs,benches and other objects ect.....
It's all a process.... those routes were made a long time ago when there were more severe limitations on what developers could build in terms of detail.

Eventually, if we can, we will release newer versions of these routes with levels of detail you all have come to expect of the modern BVE route.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: CTAredlineNYCTace on September 22, 2012, 11:51:07 am
It's all a process.... those routes were made a long time ago when there were more severe limitations on what developers could build in terms of detail.

Eventually, if we can, we will release newer versions of these routes with levels of detail you all have come to expect of the modern BVE route.
......and I'm sure we are all looking forward to that. Even I have figured out how to code a little bit. The other day I was playing around with some of the trains and route sounds and stumbled upon some ways to add and switch out sounds. I'll try and master that aspect and move on to trains and train objects. Especially since I finally downloaded the newest version of openbve that comes with all these developer features. Still, like I've said before whenever I can get back out there maybe you guys can show me some things that I don't know because I'm very anxious to get on the team and help with BVEStation content development. I'd also need to do a lot more railfaning to get more details from all the routes in the system. So of course I'm really going to need some of you guys to railfan with, seeing as though I'm not originally from NY,but it will be my new home and what better way to get fully acquainted with my new home than to see it first hand by rail and bus. I hope you guys will welcome me. 8)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 23, 2012, 08:40:40 am
just testing new txture seat...

(http://mudbvedays.webs.com/TestNewTxtureSeat.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Pacific385 on September 23, 2012, 10:44:16 am
just testing new txture seat...

(http://mudbvedays.webs.com/TestNewTxtureSeat.jpeg)
What happened to that bottom part?!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 23, 2012, 10:45:10 am
What happened to that bottom part?!

wat do u mean?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Slants4Lyfe on September 23, 2012, 10:51:45 am
What happened to that bottom part?!

Paint wearing off. Showing the original colors.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 23, 2012, 11:06:03 am
Paint wearing off. Showing the original colors.

o yea well i found one in r32 car

(http://mudbvedays.webs.com/20120913_172148.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Pacific385 on September 23, 2012, 11:14:51 am
Oh, your work is really looking good then.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: CTAredlineNYCTace on September 23, 2012, 11:23:34 am
o yea well i found one in r32 car

Yes,yes! Very realistic. Me likes.  ;) Hey just a thought; On the older rail cars,you guys think there is a way to make the lights flicker on/off when the train trucks go across interlockings?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Mr Railfan on September 23, 2012, 11:28:15 am
Paint wearing off. Showing the original colors.

If i recall correctly the original colors where a light blue, ima see if i can find a pic i took with the paint peeing off.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Pacific385 on September 23, 2012, 03:04:25 pm
Yes,yes! Very realistic. Me likes.  ;) Hey just a thought; On the older rail cars,you guys think there is a way to make the lights flicker on/off when the train trucks go across interlockings?
There is a way to do that. You just need to code it in the train and then in the route at every rail gap
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: CTAredlineNYCTace on September 23, 2012, 10:07:30 pm
There is a way to do that. You just need to code it in the train and then in the route at every rail gap
See,that's why I wish I knew how to code. :( If you guys could do that on some of the routes in progress,it would be so awsome.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: theflyingoreo on September 24, 2012, 12:50:00 am
Personally I could also go for a better E Line.

If more people contribute then I can finish it faster......
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: CTAredlineNYCTace on September 24, 2012, 03:32:08 am
If more people contribute then I can finish it faster......
I agree to the fullest but there's not much that I can do 963 miles away from NY. When I move there for good I'll atleast be able to contribute sounds pics and other things. I can't wait to help. ;)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: rstar on September 24, 2012, 12:56:37 pm
Well what do you need?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on September 24, 2012, 07:14:54 pm
Well what do you need?

It is on the contributors website, look in Mr Railfan or DJ's signatures for the link.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on September 25, 2012, 11:21:26 pm
(http://mudbvedays.webs.com/R32GeRebuildInterior(33).jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: [CT1660] on September 26, 2012, 12:42:05 pm
Yes,yes! Very realistic. Me likes.  ;) Hey just a thought; On the older rail cars,you guys think there is a way to make the lights flicker on/off when the train trucks go across interlockings?

pluginstate[53] on the Oskari plugin.

http://forums.bvestation.com/index.php?topic=1329.0 (http://forums.bvestation.com/index.php?topic=1329.0)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on October 17, 2012, 04:17:33 pm
OpenBVE - (NIS) R32 GE Rebuild leaves coney island (http://www.youtube.com/watch?v=pXSMMbJZq44#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on October 17, 2012, 09:47:22 pm
Looks good boy.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on October 18, 2012, 08:49:43 pm
(http://mudbvedays.webs.com/R32GERebuildImg1.jpeg)

(http://mudbvedays.webs.com/R32GERebuildImg2.jpeg)

(http://mudbvedays.webs.com/R32GERebuildImg3.jpeg)

(http://mudbvedays.webs.com/R32GERebuildImg4.jpeg)

(http://mudbvedays.webs.com/R32GERebuildImg5.jpeg)

(http://mudbvedays.webs.com/R32GERebuildImg6.jpeg)

(http://mudbvedays.webs.com/R32GERebuildImg7.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: bigbellymon4 on October 18, 2012, 09:14:17 pm
the new r32 is looking good. cant wait 2 try it
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on October 18, 2012, 09:38:04 pm
WOW. The boys on NYCTF will hear about this for sure. Lookin sharp C.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Bombardier01800 on October 18, 2012, 10:19:39 pm
Those seats look great
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Threxx1 on October 19, 2012, 08:11:26 am
Will the R32 have 3D poles? It's more realistic that way...
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on October 19, 2012, 10:55:17 am
Will the R32 have 3D poles? It's more realistic that way...

well 3d poles can affect frame rate.
 
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on October 19, 2012, 12:47:22 pm
Back to R32 P1 Exterior

(http://mudbvedays.webs.com/R32Phases1Interior_1.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on October 19, 2012, 01:15:13 pm
New Ceiling
(http://mudbvedays.webs.com/R32Phases1Interior_2.jpeg)
Curved Ads Ceiling
(http://mudbvedays.webs.com/R32Phases1Interior_3.jpeg)

(http://mudbvedays.webs.com/R32Phases1Interior_4.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on October 19, 2012, 09:42:00 pm
I FINALLY downloaded it today, and Mud, regards from me. This is a great train. Throw some sounds in, and tweak the cab, you got a masterpiece.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on October 21, 2012, 02:49:32 pm
I FINALLY downloaded it today, and Mud, regards from me. This is a great train. Throw some sounds in, and tweak the cab, you got a masterpiece.

oh i see
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on November 12, 2012, 02:32:01 pm
Im preparing to make 3-D headlight maybe so
(http://mudbvedays.webs.com/UpdR32(1).jpeg)

(http://mudbvedays.webs.com/UpdR32(2).jpeg)

(http://mudbvedays.webs.com/UpdR32(4).jpeg)

(http://mudbvedays.webs.com/UpdR32(3).jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 27, 2012, 06:54:02 am
R32 GE Rebuild Pic:

(http://mudbvedays.webs.com/122712R32GERebuildOnLeffShut/IMG.jpeg)
(http://mudbvedays.webs.com/122712R32GERebuildOnLeffShut/IMG1.jpeg)
(http://mudbvedays.webs.com/122712R32GERebuildOnLeffShut/IMG2.jpeg)
(http://mudbvedays.webs.com/122712R32GERebuildOnLeffShut/IMG3.jpeg)
(http://mudbvedays.webs.com/122712R32GERebuildOnLeffShut/IMG4.jpeg)
(http://mudbvedays.webs.com/122712R32GERebuildOnLeffShut/IMG5.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: NYCSUBWAYFAN on December 27, 2012, 08:47:00 am
WOW unbelievable great job  :P
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Threxx1 on December 27, 2012, 10:48:25 am
How's the underbody coming?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: CrazyMarty on December 27, 2012, 05:56:49 pm
Sweet!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dj Hammers on December 27, 2012, 06:43:16 pm
very nice work as always mudwrestle!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 27, 2012, 08:35:21 pm
thanks every1!

Know wat i work on? 3-D HEADLIGHT!

(http://mudbvedays.webs.com/122721HLPics/IMG2.jpeg)

(http://mudbvedays.webs.com/122721HLPics/IMG3.jpeg)

(http://mudbvedays.webs.com/122721HLPics/IMG4.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 27, 2012, 08:55:31 pm
(http://mudbvedays.webs.com/122721HLPics/IMG5.jpeg)

(http://mudbvedays.webs.com/122721HLPics/IMG6.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: C40LF 801 on December 27, 2012, 09:09:52 pm
Amazing!!! Will u do the same for the non GE rebuild 32?
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 27, 2012, 09:44:40 pm
(http://mudbvedays.webs.com/122721HLPics/IMG7.jpeg)

Amazing!!! Will u do the same for the non GE rebuild 32?

yes i will do that soon
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: C40LF 801 on December 27, 2012, 10:10:55 pm
Nice thanks!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Pegasusleos4 on December 27, 2012, 11:05:34 pm
I'm so speechless right now, Amazing job Mudwrestle and others people who is contributing to this project. Keep up the Amazing Work Everyone. Can't wait to see this project finish  :) :D ;D
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 28, 2012, 06:30:02 am
(http://mudbvedays.webs.com/122721HLPics/IMG8.jpeg)

(http://mudbvedays.webs.com/122721HLPics/IMG9.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 28, 2012, 06:55:30 am
(http://mudbvedays.webs.com/122721HLPics/IMG10.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 28, 2012, 06:59:18 pm
I done implement Pole's Ring on ceiling in r32 ge rebuild

(http://mudbvedays.webs.com/-%20New%20Folder/R32GERPoleRing.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 29, 2012, 10:12:04 am
I will or dj hammers will implement those pole ring on the R38s ceiling.

I think i will release r32 ge rebuild as part one

R32 phase one is holding
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: rstar on December 29, 2012, 11:08:56 am
Nice Mud
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: C40LF 801 on December 29, 2012, 02:17:28 pm
Best train in bve world in my opinion.
But on this train the breaks are a little to weak so in the next version will it include more sensitive breaks cuz wen it hits 7mph, it is weak from 7 down to 3. Thanks!
-Adam
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on January 05, 2013, 09:45:40 pm
wat do u think of new seat?
(http://mudbvedays.webs.com/122721HLPics/IMG13.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on January 05, 2013, 10:06:49 pm
(http://mudbvedays.webs.com/122721HLPics/IMG14.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: TrainFanInfinity on January 06, 2013, 11:14:01 am
wat do u think of new seat?
(http://mudbvedays.webs.com/122721HLPics/IMG13.jpeg)

Awesome.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: bigbellymon4 on January 06, 2013, 02:14:04 pm
wat do u think of new seat?
(http://mudbvedays.webs.com/122721HLPics/IMG13.jpeg)
the seat looks great! keep up the good work Mudwrestle!!!!!!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on January 06, 2013, 08:49:59 pm
Love the added lights  ;)

Nice job on the train overall.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on January 19, 2013, 06:55:08 pm
(http://mudbvedays.webs.com/TameClone80/IMG.jpeg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on January 20, 2013, 07:38:46 am
OpenBVE - Preview R32 Phase 1 Part 1 (http://www.youtube.com/watch?v=kOHl9rHQeZs#ws)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: rstar on February 23, 2013, 10:10:07 pm
(http://i.imgur.com/gGb5oGm.jpg) (http://imgur.com/gGb5oGm) DAMN FPS lol
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Nicholas Blonski on February 24, 2013, 12:30:30 am
The cab looks quite good. But I think the power controller should be replaced for the real R32 controller, instead of that R68-like controller.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dj Hammers on February 24, 2013, 12:41:27 am
The cab looks quite good. But I think the power controller should be replaced for the real R32 controller, instead of that R68-like controller.
That controller is Westinghouse controller. The R68s have them, but the R32 Phase II cars had them too (Except for two cars, all the Phase II cars were reefed).
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Nicholas Blonski on February 24, 2013, 12:47:17 am
That controller is Westinghouse controller. The R68s have them, but the R32 Phase II cars had them too (Except for two cars, all the Phase II cars were reefed).

Then I'm guessing the cab is only accurate for a Phase II car. For a Phase I car, the regular R32/SMEE controller should be used.



Also, Rstar, just wondering. What route was that screenshot taken on? I'm curious, since it looks like I would have a blast operating it.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: rstar on February 24, 2013, 08:35:21 am
Then I'm guessing the cab is only accurate for a Phase II car. For a Phase I car, the regular R32/SMEE controller should be used.



Also, Rstar, just wondering. What route was that screenshot taken on? I'm curious, since it looks like I would have a blast operating it.
That the Rockaway Shuttle that Blue18 release.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Nicholas Blonski on February 24, 2013, 08:15:24 pm
That the Rockaway Shuttle that Blue18 release.

Thanks, I'll look around for it.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dj Hammers on February 24, 2013, 11:00:52 pm
Here's the download link
http://www.openbveconnect.com/download.php?view.118 (http://www.openbveconnect.com/download.php?view.118)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 05, 2013, 09:35:54 pm
Time to resume working on r32 p1 and ge rebuild!

(http://i.imgur.com/fuvOjFl.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 06, 2013, 06:23:32 pm
tell me which is better?
A.
(http://i.imgur.com/Mahxcyw.png)

B.
(http://i.imgur.com/R6Hq45N.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: trainbrain on May 06, 2013, 06:28:49 pm
A
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: dogerdog on May 06, 2013, 07:07:50 pm
A
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Allyn65 on May 06, 2013, 07:58:55 pm
A
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 08, 2013, 08:26:07 am
OpenBVE - Mixed with R32 Phase 1 and R38 (http://www.youtube.com/watch?v=qcGcZwOTIq4#ws)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 08, 2013, 11:31:26 am
OpenBVE - R32 Phase 1/R38 Testing left at 88th Street (http://www.youtube.com/watch?v=qT917-PY814#ws)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 08, 2013, 05:13:12 pm
OpenBVE - R32 Phase 1 and R32 Ge Rebuild (http://www.youtube.com/watch?v=U-MMSznDAcI#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 10, 2013, 01:03:26 pm
OpenBVE - IND (H) Rockaway Shuttle to Mott Ave (http://www.youtube.com/watch?v=QdXfSTwaeRs#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 11, 2013, 06:37:14 am
im still working on R32 Pre GOH Exterior
(http://i.imgur.com/5GjsrDu.png)

(http://i.imgur.com/WPTfhZq.png)

(http://i.imgur.com/tjGzSTZ.png)

(http://i.imgur.com/rNDK5BL.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Fan Railer on May 11, 2013, 04:22:24 pm
lookin' fresh
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Threxx1 on May 11, 2013, 07:01:19 pm
 :o  ;D

I had no idea you were even developing a PRE-GoH R32... It looks awesome!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 12, 2013, 02:04:52 pm
new roof for r32 pre goh and route on rollsign

(http://i.imgur.com/JY1feVk.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 12, 2013, 05:41:09 pm
(http://i.imgur.com/wLCjmFt.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on May 12, 2013, 08:23:19 pm
Funky Fresssh ;D
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 12, 2013, 09:33:55 pm
(http://i.imgur.com/1EOHzcs.png)

(http://i.imgur.com/gYeWb8c.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 13, 2013, 10:51:21 am
(http://i.imgur.com/i2Bol7k.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on May 13, 2013, 11:57:52 am
FRESH!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 13, 2013, 01:23:15 pm
(http://i.imgur.com/IcFgMx5.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: trainbrain on May 13, 2013, 02:19:52 pm
(http://i.imgur.com/IcFgMx5.jpg)

Wow lookin' nice Mudwrestle... :)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Fan Railer on May 13, 2013, 04:35:40 pm
would it be difficult to modify the trucks for the Pre-GOH r32 so that they look like the original as well?
(http://images.nycsubway.org/i4000/img_4730.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 13, 2013, 04:46:18 pm
would it be difficult to modify the trucks for the Pre-GOH r32 so that they look like the original as well?
(http://images.nycsubway.org/i4000/img_4730.jpg)

i already know it bro plus i need NR/SR for that
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: trainbrain on May 13, 2013, 05:02:27 pm
would it be difficult to modify the trucks for the Pre-GOH r32 so that they look like the original as well?
(http://images.nycsubway.org/i4000/img_4730.jpg)

Don't forget the LCL / EXP signs and the different number plates (which use the same font as on the R38)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 14, 2013, 10:06:00 pm
(http://i.imgur.com/5nvlBCV.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: JayJay85 on May 15, 2013, 06:42:55 am
if u need some motorman you can used the ones from R46
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Dj Hammers on May 15, 2013, 08:57:34 am
Don't forget the LCL / EXP signs and the different number plates (which use the same font as on the R38)
actually the Pre-GOH R32 number plates use a different font than the R38 ones.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Mr Railfan on May 15, 2013, 09:25:29 am
actually the Pre-GOH R32 number plates use a different font than the R38 ones.

Correct. They are very similar, but are not the same font.
R32:
(http://i.imgur.com/2cizbtE.jpg)
R38:
(http://i.imgur.com/hXfMxQo.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: trainbrain on May 15, 2013, 12:36:34 pm
Correct. They are very similar, but are not the same font.
R32:
(http://i.imgur.com/2cizbtE.jpg)
R38:
(http://i.imgur.com/hXfMxQo.jpg)

Ohhh.....I see the difference.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: YankeesPwnMets on May 16, 2013, 07:38:14 pm
Nice!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 17, 2013, 08:09:21 am
(http://i.imgur.com/Z1lV21L.png)

(http://i.imgur.com/LzhCfLo.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 17, 2013, 10:58:05 am
OpenBVE - R32 Pre GOH Franklin Av to Prospect Park (http://www.youtube.com/watch?v=K2HFPhFrubI#)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 17, 2013, 04:48:22 pm
finally, i made 3-d ceiling light
(http://i.imgur.com/6MWqFyi.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 25, 2013, 08:01:12 am
(http://i.imgur.com/Y7qWQvF.png)

(http://i.imgur.com/B3sNdj0.jpg)

(http://i.imgur.com/aUBIdLT.png)

(http://i.imgur.com/bKpyhFp.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: bigbellymon4 on May 25, 2013, 08:09:33 pm
wow this train is looking AWESOME!!!!! GREAT WORK Mudwrestle!!!!!!!!!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 26, 2013, 11:20:17 am
http://www.openbveconnect.com/download.php?view.167 (http://www.openbveconnect.com/download.php?view.167)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ghosttarin on May 26, 2013, 03:17:47 pm
http://www.openbveconnect.com/download.php?view.167 (http://www.openbveconnect.com/download.php?view.167)

this  train is  hot i love all detail and everything so real like
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 29, 2013, 04:57:24 pm
Updating r32 pre goh 4 set cars...
DOWNLOAD: http://www.mediafire.com/download/n4jx482c34n8fmk/R32_Pre_GOH_-_4_Set_Cars_Beta_4.0.rar (http://www.mediafire.com/download/n4jx482c34n8fmk/R32_Pre_GOH_-_4_Set_Cars_Beta_4.0.rar)

OpenBVE - R32 Pre GOH CC Line to Lefferts Blvd (http://www.youtube.com/watch?v=Su6TmxSyU3w#)

(http://i.imgur.com/suNTRMQ.png)
(http://i.imgur.com/AaLm9VB.png)
(http://i.imgur.com/fpTbpHW.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on May 30, 2013, 03:01:19 pm
SWEETNESS!!!!!!!!!!!!!!!!!!!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 30, 2013, 05:34:14 pm
(http://i.imgur.com/F46Le3A.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Nicholas Blonski on May 30, 2013, 09:45:45 pm
Saw this on Facebook! Looks AMAZING!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: trainbrain on May 31, 2013, 12:32:36 pm
Wow Mudwrestle, this is amazing.
Going back to page 1 of this thread and then to here seems like going to a whole other planet! How this train has changed overtime really shows what developers are capable of.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on June 01, 2013, 07:48:29 pm
Updated..

Download: http://www.mediafire.com/download/9yigtdtb8t9au84/R32_Pre_GOH_-_4_Set_Cars_Beta_5.0.rar (http://www.mediafire.com/download/9yigtdtb8t9au84/R32_Pre_GOH_-_4_Set_Cars_Beta_5.0.rar)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on June 08, 2013, 07:08:05 pm
(http://i.imgur.com/1gnyGTi.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on June 09, 2013, 10:45:49 am
(http://i.imgur.com/GWcvMfx.jpg)

(http://i.imgur.com/jIWsVYS.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on June 09, 2013, 06:34:09 pm
ok here is update r32 pre goh

4 set cars

Download: http://www.mediafire.com/download/s8nhgm20xlplc4x/R32_Pre_GOH_-_4_Set_Cars_Beta_6.0.zip (http://www.mediafire.com/download/s8nhgm20xlplc4x/R32_Pre_GOH_-_4_Set_Cars_Beta_6.0.zip)

10 set cars

Download: http://www.mediafire.com/download/sh9uas68a0z0z6h/R32_Pre_GOH_-_10_Set_Cars_Beta_6.0.zip (http://www.mediafire.com/download/sh9uas68a0z0z6h/R32_Pre_GOH_-_10_Set_Cars_Beta_6.0.zip)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: WestEndMan on June 09, 2013, 11:00:08 pm
5.0 works better for me. Don't know about anyone else. With 5.0, i was able to control rollsigns, exp/local indicators etc. With 6.0, the rollsigns move when I change brake and throttle positions. Local/Exp indicators don't work. Also speedometer is still measuring in KPH. But I guess thats why its labled "Beta" Other than that, great train.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Threxx1 on June 10, 2013, 03:36:13 pm
5.0 works better for me. Don't know about anyone else. With 5.0, i was able to control rollsigns, exp/local indicators etc. With 6.0, the rollsigns move when I change brake and throttle positions. Local/Exp indicators don't work. Also speedometer is still measuring in KPH. But I guess thats why its labled "Beta" Other than that, great train.

It has to do with the native OpenBVE ATS activating instead of the real plugin. if you replace your train.dat file from 6.0 with the one from 5.0 it should work.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on June 11, 2013, 07:37:10 am
Light Version for R32 Pre GOH 10 Set Cars

Download:
http://www.mediafire.com/download/a0dtrirbgrvius4/R32_Pre_GOH_-_10_Set_Cars_Lite_Beta_6.0.zip (http://www.mediafire.com/download/a0dtrirbgrvius4/R32_Pre_GOH_-_10_Set_Cars_Lite_Beta_6.0.zip)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Legobrickbreaker101 on June 21, 2013, 04:48:16 pm
Awesome! Love It!
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on June 24, 2013, 09:58:14 pm
1969 R32 Pre GOH Rollsigns

(http://i.imgur.com/OQ9Myld.png)

(http://i.imgur.com/vymDxgP.png)

(http://i.imgur.com/0zVSmGO.png)

(http://i.imgur.com/KtLlc5R.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 04, 2013, 09:14:36 am
new roof signs
(http://i.imgur.com/Uf5JiSG.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 07, 2013, 12:24:11 pm
(http://i.imgur.com/4APAQPc.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 22, 2013, 07:35:59 pm
(http://i.imgur.com/f7qSaPV.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 25, 2013, 03:47:26 pm
(http://i.imgur.com/pDZHPW3.jpg)

(http://i.imgur.com/97Ep2la.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 25, 2013, 09:55:47 pm
(http://i.imgur.com/OfYZGAq.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 28, 2013, 08:11:57 am
new ceiling/floor texture

(http://i.imgur.com/IapbdSO.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on July 29, 2013, 05:07:50 pm
3-D Underbody
(http://i.imgur.com/CBbg1X3.png)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 04, 2013, 08:54:30 am
(http://i.imgur.com/859YHca.png)

(http://i.imgur.com/dYa10W2.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on August 04, 2013, 01:15:02 pm
ILL, son just ILL! ;D
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 21, 2013, 07:23:23 am
(http://i.imgur.com/7NlwlMe.png)

(http://i.imgur.com/6CSOYxe.jpg)
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: Brighton Express on August 21, 2013, 06:05:44 pm
Nice work Mudwrestle.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: trainz2011 on August 21, 2013, 08:21:33 pm
This is looking awesome. question is does it lag ? my graphic card is an AMD Radeon 6310 with 1.30 GHz 4.00 GB I SHould know before i download.
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 22, 2013, 07:14:51 am
This is looking awesome. question is does it lag ? my graphic card is an AMD Radeon 6310 with 1.30 GHz 4.00 GB I SHould know before i download.

Use 4, 6, 8 set cars. i run 4 - 8 set cars all times like back in the day
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on August 22, 2013, 07:20:17 am
This is looking awesome. question is does it lag ? my graphic card is an AMD Radeon 6310 with 1.30 GHz 4.00 GB I SHould know before i download.

My PC i get mad LAG by i was using 10 set cars HQ...

My old HP laptop i get mad SMOOOOUUUUOOOOTH by i was using 4-10 set cars HQ/LQ.

My old HP laptop a CHAMP
Title: Re: Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: trainz2011 on August 24, 2013, 03:52:03 am
Ah man , i just  downloaded it I Was using the 10 car set & it lagged like ugh i guess ima try the 8 car.
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 08, 2013, 06:54:34 pm
restarted processing my r32 phase I now
(https://scontent-b-lga.xx.fbcdn.net/hphotos-prn2/1465205_681150838583009_1331265469_n.jpg)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 08, 2013, 07:25:08 pm
(https://scontent-b-lga.xx.fbcdn.net/hphotos-prn2/v/1422818_681160365248723_1621285507_n.jpg?oh=438c278a4ca23c87759db3d77680dceb&oe=52A70973)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on December 08, 2013, 07:26:54 pm
word 8)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 09, 2013, 08:48:29 am
(https://scontent-b-lga.xx.fbcdn.net/hphotos-ash4/1479478_681405645224195_1279282527_n.jpg)

(https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn2/1441208_681405671890859_1070347666_n.jpg)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 09, 2013, 10:40:32 pm
http://www.youtube.com/watch?v=g6WduxMs3NU&feature=youtu.be# (http://www.youtube.com/watch?v=g6WduxMs3NU&feature=youtu.be#)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 10, 2013, 06:55:11 am
New R32's Flipdots that i made.
OpenBVE - New R32 Flipdot made by Mudwrestle (http://www.youtube.com/watch?v=4MyTQqmyRco#)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 12, 2013, 09:08:18 am
(https://scontent-b-lga.xx.fbcdn.net/hphotos-prn1/1503922_682426848455408_574804270_n.jpg)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 12, 2013, 09:23:20 am
(https://scontent-b-lga.xx.fbcdn.net/hphotos-prn2/v/1456639_682967518401341_1823257055_n.jpg?oh=0365e739af47ece5cfe298e9cf9e886a&oe=52ABFA2B)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on December 12, 2013, 05:55:57 pm
Nice
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 21, 2013, 02:36:22 pm
thanks to randy/andre for textures...
(http://i.imgur.com/QtJ0lWa.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 28, 2013, 08:36:45 am
3D Driver is now in the front r32 cab :)
(http://i.imgur.com/bl5X3cW.png)
(http://i.imgur.com/l1ISuDc.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: HijauKuda on December 28, 2013, 09:30:08 am
Sir Pedro,
I very much like your 3D driver!
Is 3D object driver for use available combine in other trains?

Good day and night for you.
HK
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: rstar on December 28, 2013, 08:56:43 pm
Just to let you know the R32 33XX 34XX has the horn on top. 35XX + has the horn on the bottom of the train.
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: luckydude on December 28, 2013, 10:02:30 pm
the man knows his trains
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 29, 2013, 07:01:26 am
Just to let you know the R32 33XX 34XX has the horn on top. 35XX + has the horn on the bottom of the train.

uh i am mudwrestle....but i rename this username as my aim username...
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 30, 2013, 06:34:53 am
Sir Pedro,
I very much like your 3D driver!
Is 3D object driver for use available combine in other trains?

Good day and night for you.
HK

only if developers are interested in 3d driver for their cars then they will put 3d driver in their cars. CT660 already did though. but i modded my own 3d driver character in r32 cab as me. lol
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 30, 2013, 09:48:38 pm
(http://i.imgur.com/wz2c6E5.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on December 31, 2013, 05:56:32 pm
SWEET, I SO CAN'T WAIT!!!!
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on December 31, 2013, 06:09:07 pm
added 3D Horn
(http://i.imgur.com/nLsQtOn.png)
(http://i.imgur.com/9GmIZ4v.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on December 31, 2013, 07:17:06 pm
Nice!
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on February 03, 2014, 08:30:09 am
(http://i.imgur.com/ciyQZos.png)
(http://i.imgur.com/qxGL0JJ.png)
(http://i.imgur.com/OINcasC.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on February 03, 2014, 08:32:53 am
3D poles have been finally set sources for R32. So, i will start working on them when i come home from work.
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on February 03, 2014, 11:23:49 am
Amazing :D
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on February 04, 2014, 08:25:17 am
realistic between doors and walls
(http://i.imgur.com/i0Ui0ec.png)
(http://i.imgur.com/hvP7cqU.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on February 04, 2014, 06:47:47 pm
(http://i.imgur.com/D7cZbP9.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on February 04, 2014, 08:51:25 pm
Nice!
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on February 05, 2014, 08:29:34 am
(http://i.imgur.com/UhBjsS3.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on February 05, 2014, 11:53:55 am
(http://i.imgur.com/q4hJhcO.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on February 05, 2014, 01:42:13 pm
Nice! can't wait for the next release!
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on February 13, 2014, 05:19:32 am
(http://i.imgur.com/GzGzV2N.png)
(http://i.imgur.com/MYhvw3f.png)
(http://i.imgur.com/TeI3t3f.png)
(http://i.imgur.com/lA9Ur2U.png)
(http://i.imgur.com/rKxAOHg.png)
(http://i.imgur.com/OqENx5D.png)

glow flipdot in far distance as you see
(http://i.imgur.com/vGAQziE.png)

new flipdot i made them
(http://i.imgur.com/qz9KQkz.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on February 13, 2014, 12:31:30 pm
Amazing!
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on February 14, 2014, 06:30:00 am
(http://i.imgur.com/StXNIy7.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on February 14, 2014, 08:08:22 am
 :o wow
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 02, 2014, 08:33:26 am
some 3D stuffs implement to R32 Pre GOH
(http://i.imgur.com/fNdoBFI.png)
(http://i.imgur.com/clydtSv.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on March 02, 2014, 07:34:11 pm
Slammin!
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 05, 2014, 12:46:14 am
(http://i.imgur.com/lNWTPNK.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on March 05, 2014, 08:17:36 am
NICE! I can't wait for the next release!
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: CoronaYards on March 10, 2014, 08:41:03 pm
Looks so realistic!
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 23, 2014, 12:21:35 pm
(http://i.imgur.com/fNrTdO9.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 23, 2014, 12:29:03 pm
(http://i.imgur.com/H5cjtwK.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 23, 2014, 07:11:07 pm
(http://i.imgur.com/CWDVF8R.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: JayJay85 on March 23, 2014, 08:47:17 pm
(http://i.imgur.com/CWDVF8R.png)

Thats looks hot!
Good job man.
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on March 23, 2014, 10:35:53 pm
Slammin'!
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on March 24, 2014, 08:42:47 am
Thanks anyone
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: CoronaYards on April 05, 2014, 06:09:39 pm
Looks awesome!
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 13, 2014, 11:14:04 am
Hey everyone, I will be nice guy as old man who gave u a peppermint cane. I am releasing my half percent of R32 P1 8/10 Set Cars. I also thankful to Nyctrman made perfect texture for R32's roof sign.

(http://i.imgur.com/jQ4rQUX.png)
(http://i.imgur.com/TPDFXLv.png)
(http://i.imgur.com/VuYMZuw.png)

Download:

8 Set Cars
https://www.facebook.com/download/753195171369948/R32%20Phase%201%20-%208%20Set%20Cars.zip (https://www.facebook.com/download/753195171369948/R32%20Phase%201%20-%208%20Set%20Cars.zip)

10 Set Cars
https://www.facebook.com/download/1407001326239062/R32%20Phase%201%20-%2010%20Set%20Cars.zip (https://www.facebook.com/download/1407001326239062/R32%20Phase%201%20-%2010%20Set%20Cars.zip)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ErrorMacro11 on April 13, 2014, 12:05:04 pm
thats very generous of you
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 13, 2014, 12:08:30 pm
thats very generous of you

lol thanks bro
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: jay1323 on April 13, 2014, 12:31:06 pm
For some reason i cannot download the train
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 13, 2014, 12:36:25 pm
For some reason i cannot download the train

anti smee? lol so whats the problem?
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: jay1323 on April 13, 2014, 12:49:12 pm
Facebook telling me "Page not Found"
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 13, 2014, 02:07:41 pm
Facebook telling me "Page not Found"

oh im going to upload on mediafire gimme sec
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 13, 2014, 02:19:34 pm
R32 Phase 1 - 8 Set Cars

http://www.mediafire.com/download/2p9e9wyw31delxz/R32_Phase_1_-_8_Set_Cars.zip (http://www.mediafire.com/download/2p9e9wyw31delxz/R32_Phase_1_-_8_Set_Cars.zip)

R32 Phase 1 - 10 Set Cars

http://www.mediafire.com/download/mumuhmmgcka3vzm/R32+Phase+1+-+10+Set+Cars.zip (http://www.mediafire.com/download/mumuhmmgcka3vzm/R32+Phase+1+-+10+Set+Cars.zip)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on April 19, 2014, 07:13:25 am
new walls i have to replace those as soon

(http://i.imgur.com/vOoQlIE.jpg)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on May 31, 2014, 08:25:26 am
im going to rework on R32 GE

(http://i.imgur.com/wKkgB0T.png)
(http://i.imgur.com/J6EJ6UI.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: CoronaYards on June 07, 2014, 12:50:35 am
Looking very realistic, especially the GE rebuild ( always been my favorite ).
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on January 18, 2015, 07:20:47 pm
about to redo my R32 Pre GOH as using R27/R30 interior

(http://i.imgur.com/B0qSflI.png)

(http://i.imgur.com/cbMxn43.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: PelhamLocal on January 19, 2015, 12:10:45 pm
NICE!
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: NYCT N train on January 19, 2015, 04:56:28 pm
im going to rework on R32 GE

(http://i.imgur.com/wKkgB0T.png)
(http://i.imgur.com/J6EJ6UI.png)
it looks very close to real! Great job!
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on January 20, 2015, 08:43:01 am
(http://i.imgur.com/PEn7LWm.png)

(http://i.imgur.com/W4X8SXm.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on January 22, 2015, 06:11:19 am
(1987) R32

(http://i.imgur.com/wdv274d.png)
(http://i.imgur.com/qe6oGLg.png)
(http://i.imgur.com/yZ3qdJc.png)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: bigbellymon4 on January 22, 2015, 07:21:18 pm
Amazing detail on the R32! When these trains retire (if the MTA ever retires the rest of them lol), an amazing way to remember these trains and the role they played in moving the millions in NYC is by running a route with one of your highly detailed R32s. Keep up the good work!
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: Bombardier01800 on January 22, 2015, 07:51:19 pm
I love that train. I can't wait to run it on my new computer!
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: NYCT N train on January 22, 2015, 08:57:17 pm
Looks Good!
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on January 23, 2015, 08:01:24 am
1964:
(http://i.imgur.com/996fnxA.png)
(http://i.imgur.com/jMMnBHt.png)
1970s:
(http://i.imgur.com/C0aj13q.png)
(http://i.imgur.com/BUZkk73.png)
1980s:
(http://i.imgur.com/lXOVUrS.png)
(http://i.imgur.com/B8bku8M.png)
Title: Re: (RELEASED) Official Update Thread For The NYCTA R32 Pre GOH/GE/Phase I/Phase II
Post by: ??????????????? on January 24, 2015, 06:41:16 am
it looks very close to real! Great job!

that model has been abandoned for 2 years lol
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on January 24, 2015, 07:04:18 am
R27 & R32
(http://i.imgur.com/fz2FsVD.png)
(http://i.imgur.com/Y8ndPgJ.png)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on February 14, 2015, 06:47:47 pm
here my vintage r32 model from 3 yrs ago LoL

(http://i.imgur.com/Vdle4dB.png)

(http://i.imgur.com/WY8J9vd.png)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on February 14, 2015, 06:56:43 pm
1980's R32 Pre GOH
(http://i.imgur.com/CfWu1wA.png)
(http://i.imgur.com/8gWLIlE.png)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on February 15, 2015, 09:28:19 am
(http://i.imgur.com/czO4mvT.png)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on February 17, 2015, 10:05:20 am
(http://i.imgur.com/MqqSgdL.png)
(http://i.imgur.com/cnJu5yT.png)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: Ramirez1523 on February 17, 2015, 11:46:42 am
Looking amazing :)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on February 17, 2015, 12:31:29 pm
Looking amazing :)

yeah i work so hardest and rebuild my R32 shapes to way to better than older i made them before :). I'm still learning from different developers' styles
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on February 18, 2015, 10:39:49 am
[youtube]https://www.youtube.com/watch?v=EwLESBts_8g&feature=youtu.be[/youtube]
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on February 18, 2015, 03:15:11 pm
Brand New R32 GOH Model for OpenBVE

(http://i.imgur.com/qIjZkPb.png)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on February 18, 2015, 07:30:54 pm
(http://i.imgur.com/AADKZkG.png)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on February 20, 2015, 04:53:22 pm
(http://i.imgur.com/b8d6kbW.png)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on February 21, 2015, 03:30:15 pm
more realistic....oh yea rollsign wall's reflect from other side...

(http://i.imgur.com/iX9BreZ.png)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on February 22, 2015, 11:48:41 am
(http://i.imgur.com/5gZ0Fi8.png)

(http://i.imgur.com/03DtzUL.png)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: PelhamLocal on February 22, 2015, 02:17:56 pm
Man, it just keeps getting better and better. Also the Flipdots look spot on!  :D
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on February 22, 2015, 07:55:41 pm
[youtube]https://www.youtube.com/watch?v=RAiLpRVhOkk&list=UU-InRzbFFhT_mdkJiJxif1w[/youtube]
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on February 26, 2015, 07:34:39 am
(http://i.imgur.com/mBHsacb.png)
(http://i.imgur.com/3NX6JGZ.png)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: PelhamLocal on February 27, 2015, 04:27:29 pm
Bro, the reflection of the glass on the rolling sign box........Foam ;D
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on February 28, 2015, 12:53:26 pm
(http://i.imgur.com/5MUInyC.png)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on March 01, 2015, 05:15:32 pm
good fps for now

(http://i.imgur.com/byJBQ8E.png)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on March 01, 2015, 10:06:12 pm
(http://i.imgur.com/QavEJx6.png)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on March 02, 2015, 09:01:53 am
[youtube]https://www.youtube.com/watch?v=yn4ertgIvrI[/youtube]
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on March 02, 2015, 09:10:47 am
planning to make next version of R32 for OpenBVE
(http://i.imgur.com/nWr5VGI.jpg)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on April 15, 2015, 07:40:25 am
I consider my all R32 Pre GOH will be postpone so far away until all present trains are complete. My apologize.

(http://i.imgur.com/MqqSgdL.png)

(http://i.imgur.com/PYN6ENr.png)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: Allyn65 on April 15, 2015, 04:30:27 pm
Nice work
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on April 15, 2015, 04:40:45 pm
Question for you all members about new R32 GOH.

Is New R32 GOH improvement for FPS?

My old R32 GOH used to be heavy and lag.

I hopeful you all are relief nowadays....
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: Fan Railer on April 16, 2015, 03:18:07 am
Question for you all members about new R32 GOH.

Is New R32 GOH improvement for FPS?

My old R32 GOH used to be heavy and lag.

I hopeful you all are relief nowadays....

Much better. getting mid 20s when recording, and when not recording, getting 30-40.
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on April 18, 2015, 07:16:33 am
Much better. getting mid 20s when recording, and when not recording, getting 30-40.

i see...my r32 goh seem improvement after all
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on April 18, 2015, 07:20:17 am
I think i will let 1980s R32 Pre GOH to be release except below versions. Because they need to more work

My apologize
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on April 18, 2015, 08:32:27 pm
updating some

(http://i.imgur.com/LtsSprS.jpg)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on April 22, 2015, 07:22:31 am
[youtube]https://www.youtube.com/watch?v=sQ0CqI_9owk[/youtube]
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on May 03, 2015, 02:54:09 pm
R32 on J for life lol

(http://i.imgur.com/JUWb5hl.png)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: ??????????????? on May 08, 2015, 09:12:04 am
looks more clean

(http://i.imgur.com/3mQGmyZ.png)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: AJ of JGD on May 22, 2015, 10:44:37 am
Nice touches  :)
Title: Re: (RELEASED - WIP) Official Update Thread For The NYCTA R32 Pre GOH/GE/Ph I/Ph II
Post by: BStyles on March 12, 2017, 07:13:18 pm
Topic locked due to inactivity.

BStyles