BVEStation Forums

BVE => BVE/OpenBVE Support => Topic started by: B3 via Av U on July 30, 2014, 11:00:24 pm

Title: (2) door issue
Post by: B3 via Av U on July 30, 2014, 11:00:24 pm

When I do the (2) line in OpenBVE with the R142A, I always have to open  the door on the right at each station even if the platform is on the left. Is there a remedy to this issue?

Title: Re: (2) door issue
Post by: YankeesPwnMets on July 31, 2014, 12:06:24 am

You have to reprogram the route.

Read up on the ".sta" command here (courtesy of Kevin):
http://www.bvestation.com/forums/index.php?topic=2772.0 (http://www.bvestation.com/forums/index.php?topic=2772.0)

Title: Re: (2) door issue
Post by: bvefan on July 31, 2014, 01:53:16 pm

Yea that's not a door issue it's a route issue. That usually how the old routes were

Title: Re: (2) door issue
Post by: B3 via Av U on August 01, 2014, 12:02:22 pm

Quote from: YankeesPwnMets on July 31, 2014, 12:06:24 am

You have to reprogram the route.

Read up on the ".sta" command here (courtesy of Kevin):
http://www.bvestation.com/forums/index.php?topic=2772.0 (http://www.bvestation.com/forums/index.php?topic=2772.0)

Thanks for the helpful information! I'll probably reprogram the route tomorrow, do you know where I can post the modified route and possibly have the (2) installer modified with it?

Quote from: bvefan on July 31, 2014, 01:53:16 pm

Yea that's not a door issue it's a route issue. That usually how the old routes were

Thanks!

Title: Re: (2) door issue
Post by: BeeRyDavis on August 01, 2014, 06:36:14 pm

No need for that. The beta version for the 2 and 1  7th Ave Line is up on openbveconnect.com. You can download that beta version there. The IRT lines are being worked on now and will hopefully be downloadable soon