Im getting an error that says : "Object reference not set to an instance of an object. Please inspect the error log file for further information."
What happened ? :(
I have encountered two problems while running the R46 here are the pictures
http://s1079.photobucket.com/albums/w504/F133/?action=view¤t=problem-1.jpg (http://s1079.photobucket.com/albums/w504/F133/?action=view¤t=problem-1.jpg)
http://s1079.photobucket.com/albums/w504/F133/?action=view¤t=problem-1.jpg (http://s1079.photobucket.com/albums/w504/F133/?action=view¤t=problem-1.jpg)
Do you mind if I reupload the R46 with the fix included? This will just save hassle for the users who don't like to read anything...Im getting an error that says : "Object reference not set to an instance of an object. Please inspect the error log file for further information."
What happened ? :(
This should fix the error that you were getting:
http://www.mediafire.com/?4j0mp6pp9d17oc5 (http://www.mediafire.com/?4j0mp6pp9d17oc5)
Just drag and drop the files from the zip into the "body" directory (R46 OpenBVE>Cars>Body)
The train should now work once you replace those specified files.
Do you mind if I reupload the R46 with the fix included? This will just save hassle for the users who don't like to read anything...Im getting an error that says : "Object reference not set to an instance of an object. Please inspect the error log file for further information."
What happened ? :(
This should fix the error that you were getting:
http://www.mediafire.com/?4j0mp6pp9d17oc5 (http://www.mediafire.com/?4j0mp6pp9d17oc5)
Just drag and drop the files from the zip into the "body" directory (R46 OpenBVE>Cars>Body)
The train should now work once you replace those specified files.
F Train fan, what are your specs? You don't see many computers weaker than a Pentium III and 512 MB of RAM these days (which are the minimum specs)
F Train fan, what are your specs? You don't see many computers weaker than a Pentium III and 512 MB of RAM these days (which are the minimum specs)
it's actually the graphics card the R46 depends on. Actually, the bare minimum for a playable R46 is a Core 2 Duo, 2.4GHz or higher, and a 256MB ATI/AMD or NVIDIA graphics card.
Just did a little test run of the train, I love the panel and exterior, but the sounds break up a bit, and it seems to have the same problem as DJ Hammer's R33WF where the train turns and goes up/down inclines very abruptly. Other than that, it's perfect! Good job guys ;)
Just did a little test run of the train, I love the panel and exterior, but the sounds break up a bit, and it seems to have the same problem as DJ Hammer's R33WF where the train turns and goes up/down inclines very abruptly. Other than that, it's perfect! Good job guys ;)
That shaking was done purposely. If you tried Tjay's test route with the timers, and look at the train. It would have the same shaking effect.
Im getting an error that says : "Object reference not set to an instance of an object. Please inspect the error log file for further information."
What happened ? :(
This should fix the error that you were getting:
http://www.mediafire.com/?4j0mp6pp9d17oc5 (http://www.mediafire.com/?4j0mp6pp9d17oc5)
Just drag and drop the files from the zip into the "body" directory (R46 OpenBVE>Cars>Body)
The train should now work once you replace those specified files.
Im getting an error that says : "Object reference not set to an instance of an object. Please inspect the error log file for further information."
What happened ? :(
This should fix the error that you were getting:
http://www.mediafire.com/?4j0mp6pp9d17oc5 (http://www.mediafire.com/?4j0mp6pp9d17oc5)
Just drag and drop the files from the zip into the "body" directory (R46 OpenBVE>Cars>Body)
The train should now work once you replace those specified files.
I cannot play the R46 (3.0) even if I replace the original files. Please HELP!!! I cannot wait to play it.
Can you give us more detail than just "I cannot play the R46 (3.0)"? What happens when you try to run it?Im getting an error that says : "Object reference not set to an instance of an object. Please inspect the error log file for further information."
What happened ? :(
This should fix the error that you were getting:
http://www.mediafire.com/?4j0mp6pp9d17oc5 (http://www.mediafire.com/?4j0mp6pp9d17oc5)
Just drag and drop the files from the zip into the "body" directory (R46 OpenBVE>Cars>Body)
The train should now work once you replace those specified files.
I cannot play the R46 (3.0) even if I replace the original files. Please HELP!!! I cannot wait to play it.
Help I cannot play this R46 not even if I replace the original file. PLEASE HELP!!!Once again, please give us MORE detail. What happens when you try to load the train?
That is not what I was talking about. I meant when the train goes around curves. Similar to with the R33WF, it enters the curve very roughly instead of smoothly. Same goes for entering upward/downward slopes.You know, I'm having the same issue but I think it's got to do with OpenBVE
Hello all,
first, I was glad when I saw a new train. But, I tried it to run and got many errors. Later I noticed it's only for openBVE 1.4.1 - is it written anywhere?
Second, something is wrong when I run it on 1.4.1 version (click on links below for screens). And what does it mean "Train uses a Win32 plugin"??
http://vinceblack.me.cz/images/temp/r46_cab.jpg (http://vinceblack.me.cz/images/temp/r46_cab.jpg)
http://vinceblack.me.cz/images/temp/r46_exterior.jpg (http://vinceblack.me.cz/images/temp/r46_exterior.jpg)
That is not what I was talking about. I meant when the train goes around curves. Similar to with the R33WF, it enters the curve very roughly instead of smoothly. Same goes for entering upward/downward slopes.If you're not talking about swaying then it could be the track quality of the route in which it was coded.But what I think you mean is the train doesn't go around the curves as like it was on the track so part of the train sticks through the walls or something?
That is not what I was talking about. I meant when the train goes around curves. Similar to with the R33WF, it enters the curve very roughly instead of smoothly. Same goes for entering upward/downward slopes.
That is not what I was talking about. I meant when the train goes around curves. Similar to with the R33WF, it enters the curve very roughly instead of smoothly. Same goes for entering upward/downward slopes.
It's cause the train isn't programmed so that you're riding in the first car like all the other trains. Anybody have a fix for this? I know its something in the train.dat file.
Exactly. In a train like this, if you have the drivecar as 0 (or the first car) then the cab view will pivot with the truck as opposed to the actual car body.That is not what I was talking about. I meant when the train goes around curves. Similar to with the R33WF, it enters the curve very roughly instead of smoothly. Same goes for entering upward/downward slopes.
It's cause the train isn't programmed so that you're riding in the first car like all the other trains. Anybody have a fix for this? I know its something in the train.dat file.
The way the pivoting trucks work is that they are treated as separate cars. So the second car is technically the R46's body while the first and third cars are the trucks.
Essentially, in the train.dat file, as an 8-car set, it's in reality 24 cars.
So in the train.dat file, there's a drivercar index, it's set to 1 for the R46's carbody.
But doing so would also cause the exterior view (F2 mode) to follow the first truck, not the carbody....Exactly. In a train like this, if you have the drivecar as 0 (or the first car) then the cab view will pivot with the truck as opposed to the actual car body.That is not what I was talking about. I meant when the train goes around curves. Similar to with the R33WF, it enters the curve very roughly instead of smoothly. Same goes for entering upward/downward slopes.
It's cause the train isn't programmed so that you're riding in the first car like all the other trains. Anybody have a fix for this? I know its something in the train.dat file.
The way the pivoting trucks work is that they are treated as separate cars. So the second car is technically the R46's body while the first and third cars are the trucks.
Essentially, in the train.dat file, as an 8-car set, it's in reality 24 cars.
So in the train.dat file, there's a drivercar index, it's set to 1 for the R46's carbody.
Nice Work Guys. I really Love the realistic swaying of the train. I wish all OpenBve Trains were like this.
how to you change the rollsign and the led?
Will all the new cab would be widescreen like the R46?
how to you change the rollsign and the led?The "readme" has all of the controls...
C:\Program Files (x86)\BVE\Train\R46 OpenBVE\Cars\Body
in here right?
It seems to be lagging alotOf course. It's a very detailed train and most users probably will get some lag.
It works on my AMD laptop just fine, even though it makes the HD 4250 shit on itself.What version of OpenBVE do you have?
As long as OpenBVE works the R46 should work. So yes it should work on SP3.
it works but i lags but not like thatWell you know what me,you and many others have to deal with it.It's been said many of times there is a low quality version in the works so we will have to wait. I get decent frames in the cab 30 flat to about 35 and outside the cab I'm down btwn 9 and 12. It's not the developers fault we as a community wanted high quality stuff nor is it the rest of the communitys fault our computers can't withstand we are trying to make the best out of things.
If you lag with the R46 you're definitely gonna lag while playing GTA IV. On my work machine, I get approximately 15fps with the R46 on the F line, and I get 15 FPS while playing GTA IV as well. Until I fix my gaming machine (which won't be until after I get back from vacation) I guess I'll be stuck with 15 fps :P
Nice. I drove it in oBVE on my Linux install.I haven't tried it in Linux yet. What version of OpenBVE did you use?
"It may or may not work on Mac; I cannot provide support for Mac users"It wouldn't be a bad idea...
I have a Mac... I can do test it on Mac if you want
Sometimes that problem with the R-46 occurs because people are charging the train wrong(I am guilty of making that mistake a few times but not recently)Even when I charge the train up the "right way" I still get the same issue. I'll just reload it and it should be fine. Sometimes, I just charge up the brakes and release slowly. Then I put the reverser in forward and go. Still, when OpenBVE doesn't crash, the brakes are a problem more than half the time
Once everything is loaded the 1st thing you must do(well should do) is put the train in the Forward position then "z" so the brakes can charge up you can look at that by the "ctrl and b" keys at the same time and once the gauges are full you are fine to release the brakes fully(going from full service to accelerating or min brake".
If i were to update mt computer Like Going from a Windows vista to a Windows 7 but on the same computer will it solve the lagging on the Train cause if i go to the exterior view it lags but its smooth in the cab view??
No it wouldn't. Whether you get lag or not depends on your computer specs, not your OS.
Actually it will help some because Vista tends to use more memory than 7.
Even when I charge the train up the "right way" I still get the same issue. I'll just reload it and it should be fine. Sometimes, I just charge up the brakes and release slowly. Then I put the reverser in forward and go. Still, when OpenBVE doesn't crash, the brakes are a problem more than half the timeInteresting but don't forget I said sometimes the other times when the train is charged properly I can't explain lmao I just reset openbve.
Interesting but don't forget I said sometimes the other times when the train is charged properly I can't explain lmao I just reset openbve.I'm pretty sure it's a bug with the train and/or OpenBVE. It happens with other trains as well.
I would only expect something like an extra .5 of a frame per second.Yeah, but as I have seen integrated graphics are getting more and more powerful. The Intel HD 4000 had a hard time loading the R46 exterior but the interior view ran the F line fine at 25-30FPS. Most new laptops these days in places Best Buy only have IGPs, so some good news is that budget conscious users can finally get cheaper computers if they only game they plan to play is openBVE. Who knows whether HD Graphics 5000 will be able to run most new openBVE content smoothly.
The #1 bottleneck is without a doubt the users' graphics cards.
This train definitely is sick, but I need some help. The instructions says to use I believe it's 6,7,8 for changing signs, but when i press those keys, nothing happens and I can't change any signs. 2nd issue I'm having is when I release the brakes and increase throttle, the interior lights go out inside the train. Why? and the other thing is, has anyone noticed that the headlights are on in the fourth car just like the first car?It's 6,7,8 above the letters (not on the num pad) for the signs and 9,0 for the lights (same story)
Please HELP!!!!!
It's 6,7,8 above the letters (not on the num pad) for the signs and 9,0 for the lights (same story)
Ok. I have version 1.4.2.0. I tried all the buttons you guys said . 6,7,8,9,0. Nothing happens. All the lights go out when I put the train into service. They come on when I put in neutral or brake. Can't change signs. Don't understand what the problem is.. ?????Do you have the latest version of OpenBVE?
Ok. I have version 1.4.2.0. I tried all the buttons you guys said . 6,7,8,9,0. Nothing happens. All the lights go out when I put the train into service. They come on when I put in neutral or brake. Can't change signs. Don't understand what the problem is.. ?????Your anti-virus may be blocking the R46's plugin from working correctly. Try making your anti-virus ignore your BVE folder.
Ok. I have version 1.4.2.0. I tried all the buttons you guys said . 6,7,8,9,0. Nothing happens. All the lights go out when I put the train into service. They come on when I put in neutral or brake. Can't change signs. Don't understand what the problem is.. ?????It may not have any thing 2 do with the anti-virus. it depends on the keys that u use 2 operate the train.