BVEStation

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - arremm1

Pages: [1]
1
Station Talk / Pharmacy
« on: May 27, 2018, 12:48:40 pm »
Thanks to whomever removed all those drug ads on the site.  When I came here, I thought that I was on CVS.com, not BVE.com.

2
BVE/OpenBVE Support / Gap Filler Signal
« on: February 23, 2017, 10:38:09 am »
I wonder if someone can help me.  I placed the Gap Filler Signal that is included in the NYCT Custom Signal package, but I can't seem to get it to work.  As I stop at the station, the Gap Filler Signal is red.  As you leave the station, the signal should go blank and the bottom of the signal should say "off".  This does not occur .  The signal stays red.  Is there something (ie tripper..etc) that has to be placed so that the signal will work?  The instructions provided with the Custom Signal package does not mentiion the GF Signal.  I would appreciate any help.. Thanks

3
Station Talk / Recent Posts
« on: November 08, 2016, 11:02:31 am »
I am not a prude, but the things that are being posted on this site (See Off-Topic Post from today (Nov 8,2016) are not fit for this forum.  I have recently seen post that are selling junk and now this!  Let's clean up this site and get back to the business of railroading.

4
BVE/OpenBVE Support / Coding to change tracks in Open BVE
« on: September 28, 2016, 02:34:28 pm »
I know that this topic must have been brought up before, but I have searched the forums and cannot fine a complete answer to my problem.  So, I am trying to code a route and I want to switch tracks from the players track (Track 0) on the right hand side (Local track) to the track immediately to the left (the express track).  Now, I know that this is a turn of Track 0 to the left, but my tracks never line up.  I want the track that I come off of to continue on, so I tried several of the available "Lock" switches but they do not seem to work well with the "Turn or Curve" commands.  I have tracks going in every direction.  I also looked at other routes, like the 6 and D trains, but I can't make sense of the coding.  So, could someone that is knowledgeable in Open BVE coding, please explain to me how I can go about moving my train from the local to the express track.  I know that there a plenty of members who have the skill to do this because I have gotten some good help in the past with other issues.  Thanks for any help that you can provide.

5
BVE/OpenBVE Support / Geometry for curved rails
« on: September 14, 2016, 08:53:20 pm »
I have been trying my hand at creating a route in Open BVE, but I have run into a problem.  I was coding the 14 th Street station on the # 4 Line and am trying to recreate the curve in the station.  I am using a 104 Left curve rail, wall and platform.  The players track seems perfect, but, as I move to the left, the rails do not fit, the platforms are off and the walls are offset by the rails.  I know that if you have a 104 radius rail on the right, outside rail, then there has to be a change as your other rails are -8,-12 and -20 meters offset from the player rail.  Does anyone know how I can figure the correct radius of the track as it moves inward (radius gets smaller, I think).  Any help is appreciated.  Thanks, arremm1

6
Content Development / Object Building Tutorial
« on: April 10, 2016, 12:04:45 pm »
Does anyone have an Object Building Tutorial that is written in English.  I know there used to be one that had illustrations and easy-to -understand language.  I tried reading the tutorial on WIKI, but it just gave me a headache.  If anyone can help, I would appreciate it.  What I am looking for is for Open BVE. Thanks, Richie M

7
General BVE/OpenBVE / Can't see route in Route Viewer
« on: March 08, 2016, 05:44:50 pm »
I was trying my hand at coding a route in csv and I have the "with structure" all coded and I have put in the first 6 or 7 lines of coding for "with track", but when I try to open the route in Route Viewer, I just get a black screen with none of the options except "F7 - Open Route". I don't see anything.  Is there anything obvious to anyone that I may have overlooked?  I'd appreciate any help that I can get.  Thanks :(

8
BVE/OpenBVE Support / NYCTA D V4
« on: May 24, 2015, 11:59:37 am »
I just downloaded the updated D Line and I have a question.  No matter what train I choose to drive, there are no interior lights in the cab while in the tunnel.  You cannot see how fast you are traveling!  Is there a option in the route file that would make this happen?  I appreciate any help.  Thanks

9
BVE/OpenBVE Support / IRT 7AVE (1)
« on: March 03, 2015, 10:32:32 am »
I downloaded the IRT 1 Line and it is in a zip file format.  Inside the zip file are a large assortment of files, some that I think I need and some that I already have and some which are completely empty.  For example, after opening the zip file, you have 3 files.  First is the object file (7Ave) which contains 3 files (NYCT Objects, Westside and Westside A).  Inside the Sound file(IRT 7AVE) are a number of files (2A,2B,2I,2J,2X and AN).  As for the Routes file (NYCT-1), the is a file SMEE which is empty and a file NYT which contains the 1 Line Route CSV and a file named 1 Train.zip.  This file has 1 file (Railway) which contains 3 files (Object, Route and Sound). In the object file are 3 files (Culver, IND Valley Stream and IRT 7 AVE).  Under Route, there is another CSV file for the 1Line and under Sounds are 2 files, 1 which contains the file ARR(which appears to have announcements in it and NB  which contains file 1A which is empty.  My question is :  How in the heck do I install this route?  It seems very confusing.  What do I need to install here?  Any help would be appreciated.  Thanks

10
BVE/OpenBVE Support / NYCTA J/Z &M Lines
« on: February 03, 2015, 04:10:50 pm »
I have a question.  I downloaded the J/Z and M lines for BVE Station.  After installing, I do not have the trains asked for by the route.  The J/Z needs an R160A (4CARS) and the M needs an R160 (8CARS).   Any idea where I can find them or should I just rename the R160's that I already have?  Thanks for the help.

11
BVE/OpenBVE Support / Airport Express Line
« on: September 09, 2012, 06:28:19 pm »
I just downloaded the Airport Express Line and it says that I need the C151 Train to run this route.  I went to the website mentioned in the readme, but there is nowhere to download this train.  Any help would by appreciated.

Pages: [1]