BVEStation

Author Topic: Official Railworks: Train Simulator 2015 Videos and Screenshots Thread  (Read 89374 times)

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
So TS2015 came out today, along with a few other DLC goodies:
[youtube]http://www.youtube.com/watch?v=Vp9rV4dqDaI[/youtube]
[youtube]http://www.youtube.com/watch?v=_NsYuiJs1TA[/youtube]
Stay tuned for more action in the very near future ;)
« Last Edit: January 20, 2015, 10:27:36 am by Fan Railer »

Offline HijauKuda

  • Conductor
  • **
  • Posts: 207
  • Gender: Male
  • BVEStation Member
    • View Profile
Re: Official Railworks: Train Simulator 2015 Videos and Screenshots Thread
« Reply #1 on: September 19, 2014, 09:19:36 am »
Sir Fan Railer
Some passengers I believe have a mad cow disease, as they do walk non-sense in circles!

Good day and night for you
HK


Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2015: Metrolink EMD F59PH Physics Mod Pack Released
« Reply #2 on: September 19, 2014, 02:36:44 pm »
http://www.youtube.com/watch?v=7HBFthchfdM#
http://www.youtube.com/watch?v=uHOouy5A4-Y#
This is the Metrolink EMD F59PH & Companion Bombardier BiLevel Cab Car Physics Modification pack.

In order to utilize this freeware physics upgrade, you must have purchased the "Los Angeles Commuter Rail F59PH" pack avaliable at Steam: http://store.steampowered.com/app/277747/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the physics enhancements found in this pack for personal use if you so choose.

THIS IS NOT A SOUND UPGRADE PACK. Physics adjustments made around the existing sounds.

The purpose of this pack is to adjust the locomotive weight, fuel capacity, motor amperage limits, and braking effort values for more realistic operation.

Parameter Change Log:
1. Lowered fuel tank capacity from 4,800 gallons to 1,500 gallons.
2. Increased locomotive weight to 264,552 lbs (120 metric tons) for better adhesion characteristics.
3. Maximum tractive amps is 1550; maximum braking amps is 760.
4. Adjusted dynamic brake effort curve for more realistic operation.
5. Lowered prime mover max RPM to 900 to fix engine sound issue when revving over 900 RPM.

IMPORTANT; Install Instructions

1. Locate F59PHPack01 (C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\F59PHPack01)
2. Open DTG_Metrolink_EMD_F59PH_Physics_Mod_Pack.7z
3. Drag the file folder from the .rar in step 2 into the directory you opened in step 1.
4. The installation should be complete. Run TS2015 to check.
5. If installation is botched or does not work, to back up to original files, delete the folder from step 3.

Thank you for downloading and installing.
Enjoy =)

Link: http://www.mediafire.com/download/ir2cpifedvosc6r/TS2015_Metrolink_EMD_F59PH_Physics_Mod.rar
« Last Edit: September 19, 2014, 05:38:36 pm by Fan Railer »

Offline Ramirez1523

  • Conductor
  • **
  • Posts: 147
  • Gender: Male
  • BVEStation Member
    • View Profile
Re: Official Railworks: Train Simulator 2015 Videos and Screenshots Thread
« Reply #3 on: September 19, 2014, 03:20:27 pm »
Hey FanRailer i know this is a bit off topic but do you think anyone will create Hyundai Rotem cars for the metrolink fleet?

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
Re: Official Railworks: Train Simulator 2015 Videos and Screenshots Thread
« Reply #4 on: September 19, 2014, 05:38:55 pm »
Hey FanRailer i know this is a bit off topic but do you think anyone will create Hyundai Rotem cars for the metrolink fleet?
Hard to say, honestly.


Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2015: 10 Car Metrolink Trains
« Reply #6 on: September 22, 2014, 01:05:36 am »
[youtube]http://www.youtube.com/watch?v=mmXp2NF51PI[/youtube]
« Last Edit: January 20, 2015, 10:39:47 am by Fan Railer »

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2015: Nathan P2 Airchime Pack for Metrolink F59PH and Bombardier Cab Car WIP
« Reply #7 on: September 23, 2014, 12:42:24 am »
Train Simulator 2015 HD EXCLUSIVE: Metrolink EMD F59PH & Bombardier BiLevel Cab Nathan P2 Horn WIP
Still a work in progress; I'm not completely satisfied with it yet. Looking to be done for a release this coming Saturday (9/27). Stay tuned ;)

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2015: Nathan P2 Horn Pack for Metrolink Released
« Reply #8 on: September 24, 2014, 08:37:22 pm »
[youtube]http://www.youtube.com/watch?v=TV7VRtMz0FI[/youtube]
This is the Metrolink EMD F59PH & Companion Bombardier BiLevel Cab Car Nathan P2 Horn pack.

In order to utilize this freeware sound upgrade, you must have purchased the "Los Angeles Commuter Rail F59PH" pack available at Steam: http://store.steampowered.com/app/277747/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the sound enhancements found in this pack for personal use if you so choose.

THIS IS NOT A PHYSICS PACK. Physics adjustments have been released separately.


IMPORTANT; Install Instructions

1. Locate F59PHPack01 (C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\F59PHPack01)
2. Open DTG_Metrolink_EMD_F59PH_&_Bombardier_BiLevel_Cab_Nathan_P2_Airchime_Pack.7z
3. Drag the file folder from the .rar in step 2 into the directory you opened in step 1.
4. The installation should be complete. Run TS2015 to check.
5. If installation is botched or does not work, to back up to original files, delete the folder from step 3.

User's Manual:
A key feature of this pack is that it allows you to switch between horns on the locomotive and cab car independently of each other.
This means that both locomotive and cab car can be using the K5LA or the P2, or the locomotive can be using the P2 and the cab car the K5LA or vice versa. Upon installation, the pack sets the default horn of both the locomotive and cab car to the P2. Follow the instructions below to switch in between horns.

Switch horns on the F59PH:
1. Locate this directory: "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\F59PHPack01\Audio\RailVehicles\Diesel\F59PH\Cab"
1a. There should be two file folders; "K5LA" and "P2".
2. Enter the file folder of the horn you wish to operate with.
3. Copy (CTRL + C) the file within; "EMD_F59PH_HornControl.proxyxml"
4. Return to directory from step 1.
5. Paste (CTRL + V) the file from step 3 into the directory.
5a. Overwrite when prompted.
6. Run TS2015 to check.

Switch horns on the Cab Car:
1. Locate this directory: "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\F59PHPack01\Audio\RailVehicles\Passenger\CaliCar\Cab"
1a. There should be two file folders; "K5LA" and "P2".
2. Enter the file folder of the horn you wish to operate with.
3. Copy (CTRL + C) the file within; "CabCar_HornControl.proxyxml"
4. Return to directory from step 1.
5. Paste (CTRL + V) the file from step 3 into the directory.
5a. Overwrite when prompted.
6. Run TS2015 to check.

Thank you for downloading and installing.
Enjoy :)

Download link: http://www.mediafire.com/download/p5y696w034pb695/TS2015_Metrolink_EMD_F59PH_&_Bombardier_BiLevel_Cab_Nathan_P2_Airchime_Pack.rar
« Last Edit: January 20, 2015, 10:39:31 am by Fan Railer »

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2015: Metrolink EMD F59PH Physics Mod Expansion Pack (MP36PH-3C & F125)
« Reply #9 on: September 24, 2014, 08:50:32 pm »
Train Simulator 2015 HD: Metrolink EMD F59PH vs MPI MP36PH-3C vs EMD F125 Spirit Performance Test

This is a major update to the original F59PH physics mod pack. This release adds the ability to swap out the updated EMD F59PH physics (0:00 and 18:32) with MPI MP36PH-3C physics (6:26 and 25:48) or EMD F125 Spirit physics (12:35 and 32:35). All three test runs seen in this video were done with an identical 7 car set of Bombardier BiLevel coaches and took place between Irvine and Tustin, beginning with a downhill run to Tustin and concluding after the uphill battle back to Irvine. You will notice the difference in speed between the locomotives, and thus, the benefit of having a higher horsepower locomotive.

This is the Metrolink EMD F59PH & Companion Bombardier BiLevel Cab Car Physics Modification pack Version 2.0.

In order to utilize this freeware physics upgrade, you must have purchased the "Los Angeles Commuter Rail F59PH" pack available at Steam: http://store.steampowered.com/app/277747/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the physics enhancements found in this pack for personal use if you so choose.

THIS IS NOT A SOUND UPGRADE PACK. Physics adjustments made around the existing sounds.

The purpose of this pack is to adjust the locomotive weight, fuel capacity, motor amperage limits, and braking effort values for more realistic operation.

Parameter Change Log:
1. Lowered fuel tank capacity from 4,800 gallons to 1,500 gallons.
2. Increased locomotive weight to 271,165.8 lbs (123 metric tons) for better adhesion characteristics.
3. Maximum tractive amps is 1550; maximum braking amps is 700.
4. Adjusted tractive effort curve with 2700 wheel hp in mind; independent of HEP load.
5. Adjusted dynamic brake effort rating and curve for more realistic operation.
6. Lowered prime mover max RPM to 900 to fix engine sound issue when revving over 900 RPM.

This pack also includes the option to swap in physics of different locomotives into the F59PH body.
Additional locomotive physics included:
1. MPI MP36PH-3C
 a. Starting tractive effort of 72,500 lbs (322.5 kN) up to 16.65 mph
 b. Dynamic Brake effort of 32,742 lbs (145.64 kN) @ 55 mph
 c. Wheel horsepower of 3,216 hp (2,400 kW); independent of HEP load
 d. Increased weight of 131.1 metric tons (289,023.06 lbs)
 e. Fuel tank capacity of 2,500 gallons
 f. Amperage ratings remain the same as the F59PH
 g. Maximum speed of 83 mph

2. EMD F125
 a. Starting tractive effort of 71,040 lbs (316 kN) up to 18.66 mph
 b. Dynamic Brake effort of 35,210 lbs (156.62 kN) from 50 mph down to 5 mph
 c. Wheel horsepower of 3,531 hp (2,635 kW); assuming 550 kW HEP load
 d. Increased weight of 128 metric tons (282,188.8 lbs)
 e. Fuel tank capacity of 1,800 gallons
 f. Max traction amps = 710.4 (71040 lbs)
 g. Max braking amps = 352.1 (35210 lbs)
 h. Maximum speed of 125 mph

IMPORTANT; Install Instructions

1. Locate F59PHPack01 (C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\F59PHPack01)
2. Open DTG_Metrolink_EMD_F59PH_Physics_Mod_Pack.7z
3. Drag the file folder from the .rar in step 2 into the directory you opened in step 1.
4. The installation should be complete. Run TS2015 to check.
5. If installation is botched or does not work, to back up to original files, delete the folder from step 3.

User's Manual:
Upon installation, the pack defaults to using the F59PH physics. In order to switch physics, follow the steps below:

1. Open the following three directories:
 a. "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\F59PHPack01\RailVehicles\Diesel\F59PH\Simulation"
 b. "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\F59PHPack01\RailVehicles\Diesel\F59PH\Engine"
 c. "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\F59PHPack01\RailVehicles\Passenger\Cars\Driving Trailer\Engine"
2. In each of those directories, you will see three folders (one for each set of locomotive physics):
 a. "F59PH"
 b. "F125"
 c. "MP36PH-3C"
3. Once you choose which set of physics to use, open the respective physics folder in all three directories from step 1.
4. Copy (CTRL + C) all files you find in the opened folder located in directory 1a.
5. Proceed back to directory 1a and paste (CTRL + V) the copied files into the directory; overwrite when prompted.
6. Copy (CTRL + C) all files you find in the opened folder located in directory 1b.
7. Proceed back to directory 1b and paste (CTRL + V) the copied files into the directory; overwrite when prompted.
8. Copy (CTRL + C) all files you find in the opened folder located in directory 1c.
9. Proceed back to directory 1c and paste (CTRL + V) the copied files into the directory; overwrite when prompted.
10. If the previous 9 steps were completed properly, the physics swap should be successful; run TS2015 to check.

Thank you for downloading and installing.
Enjoy =)

Download here: http://www.mediafire.com/download/ir2cpifedvosc6r/TS2015_Metrolink_EMD_F59PH_Physics_Mod.rar

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2015: Bombardier BiLevel Cab Car Cab Ride on NEC
« Reply #10 on: October 13, 2014, 06:19:57 pm »
[youtube]http://www.youtube.com/watch?v=1w41or847mM[/youtube]

Welcome aboard. Today, we will be taking a round trip on New Jersey Transit's Northeast Corridor Line in the operating cab of a Metrolink Bombardier BiLevel cab car. Power for both our 10 car consists will be provided by an EMD F59PH, upgraded with a 4300 horsepower EMD 16-710G3C 2-stroke diesel for enhanced performance. We will start our trip at New York Penn Station operating train 3853, making all local stops, minus North Elizabeth, to Trenton Transit Center. We will then relay the train across the Delaware River into Morrisville Yard, where we will switch train sets. We will then proceed to run that set on train 3866 from Trenton, making all local stops back to New York Penn before ending our trip. Enjoy the ride =)

Table of contents (http://www.njtransit.com/pdf/rail/R0070.pdf):
-Train 3853
5:25 - Depart NY Penn Station track 8
11:50 - Secaucus Junction
20:00 - Newark Penn Station
25:50 - Newark Liberty International Airport
31:40 - Elizabeth (Perfect full service stop)
37:05 - Linden
41:15 - Rahway
46:55 - Metropark
51:25 - Metuchen
56:40 - Edison
1:01:01 - New Brunswick
1:05:08 - Jersey Avenue
1:17:30 - Princeton Junction (90 mph high speed stop)
1:25:05 - Hamilton (80 mph high speed stop)
1:31:15 - Trenton Transit Center
1:35:35 - Depart Trenton (out of service)
1:38:40 - Morrisville Layup
1:44:00 - Switch consists

-Train 3866
1:44:54 - Depart Morrisville Yard
1:52:00 - Arrive Trenton Transit Center (out of service)
1:54:30 - Depart Trenton Transit Center (in service)
1:59:00 - Hamilton (high speed stop)
2:05:55 - Princeton Junction (high speed stop)
2:19:35 - New Brunswick (90 mph high speed stop)
2:25:20 - Edison
2:30:21 - Metuchen
2:34:50 - Metropark
2:40:45 - Rahway
2:46:00 - Linden
2:52:25 - Elizabeth
2:55:25 - North Elizabeth
2:58:45 - Newark Liberty International Airport
3:04:10 - Newark Penn Station
3:12:30 - Secaucus Junction
3:19:35 - New York Penn Station
« Last Edit: January 20, 2015, 10:28:17 am by Fan Railer »

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2015: Amtrak Acela Express 165 MPH Test Runs
« Reply #11 on: October 14, 2014, 05:17:13 am »
Been messin' around on TS2015... does this look familiar to anyone? ;)
[youtube]http://www.youtube.com/watch?v=gi4NuAO66e0[/youtube]

The TS2015 take on the high speed 165 mph Acela Express late night test runs on the Northeast Corridor, as seen through Princeton Junction station.

This is the Amtrak Acela Express Physics Upgrade pack (TS2015 version).

In order to utilize this freeware physics upgrade, you must have purchased the Amtrak Acela Express EMU Add-On pack avaliable at Steam: http://store.steampowered.com/app/65231/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the physics enhancements found in this pack for personal use if you so choose.

THIS IS NOT A SOUND UPGRADE PACK. Physics adjustments made around the existing sounds.

The purpose of this pack is to correct some physics errors in the original Acela pack.


Parameter Change Log:
1. Adjusted tractive effort and braking effort curves based on real world figures available online. Original figures used were much too high and lead to an unrealistically fast train set.
2. Adjusted individual car weights based on real world figures available online.
3. Added the ammeter feature on the HUD, and tweaked the cab TE display to read a maximum of 50,000 lbf of starting tractive effort.
4. Top speed has been unlocked from 165 mph to 205 mph. Based on available power from power cars, balancing speed is 186 mph for 7 car set.

For more specifics on the specific values that were changed, proceed here: http://railworksamerica.com/forum/viewtopic.php?f=31&t=10774

IMPORTANT; Install Instructions

1. Open the Acela asset pack until the directory reads "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\AcelaPack01"
2. Then open the "Railworks_Acela_Express_Physics_Mod.rar" file.
3. Drag the folder from the .rar file and into the directory you opened in step one.
4. Overwrite if asked.
5. The installation should be complete. Run TS2015 to check.

Thank you for downloading and installing.
Enjoy =)

Download link: http://www.mediafire.com/download/62fzr0vg8stvwly/TS2015_Amtrak_Acela_Physics_Fix.rar
« Last Edit: January 20, 2015, 10:37:48 am by Fan Railer »

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2015: EMD SD70 Series Physics Mod Pack Released
« Reply #12 on: November 13, 2014, 11:48:40 am »
[youtube]http://www.youtube.com/watch?v=ims-esIwo_M[/youtube]
This is the EMD SD70 Series Physics Modification pack for the SD70MAC, SD70ACe, and SD70M-2. In this video, you will see me demonstrate the changes that I've made to the locomotives to make them perform more realistically. The test consists of 3 locomotives of one class accelerating a 60 car Autorack freight train up to 70 MPH before utilizing only dynamic braking to stop.

In order to utilize this freeware physics upgrade, you must have purchased the "SD70 V2 Volume 2 Loco Add-On" pack available at Steam: http://store.steampowered.com/app/208365/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the physics enhancements found in this pack for personal use if you so choose.

THIS IS NOT A SOUND UPGRADE PACK. Physics adjustments made around the existing sounds.

The purpose of this pack is to adjust the locomotive weight, fuel capacity, motor amperage limits, and traction and braking effort values for more realistic operation.

The pack purchased from Steam includes the BNSF SD70MAC, BNSF SD70ACe, Canadian National SD70M-2, and Norfolk Southern SD70M-2. Originally, all locomotives in this pack shared a single set of operating physics, making them operationally identical in the game. However, we know that these locomotive models differ greatly in real life. This mod pack differentiates those locomotives in the game.

General Parameter Change Log (same for all three locomotive classes):
1. Set fuel tank capacity to 4,900 gallons.
2. Changed HUD ammeter function so that it displays tractive/braking effort in thousands of pounds. This means that if the HUD ammeter reads "157 Amps", the locomotive is putting out 157,000 lbs of tractive effort. Conversely, if the HUD ammeter reads "-34.52 Amps", the locomotive is putting out 34,520 lbs of dynamic braking effort.
3. Adjusted tractive effort ratings and curves for individual locomotive models based on the specifications listed below.
4. Adjusted dynamic brake effort ratings and curves for individual locomotive models based on the specifications listed below.


Specific horsepower and tractive effort ratings used in calculation for individual locomotive models:
1. EMD SD70MAC (EMD 16-710G3B; 4000 THP)
   a. Starting tractive effort of 175,500 lbs (780.663 kN) up to 7.165 mph.
   b. Traction horsepower at wheel is 3,350 hp (2,500 kW).
   c. Max Dynamic Brake effort of 81,000 lbs (360.3 kN) from 23.845 mph to 3 mph; linear fade from that speed to 0 lbs @ 1 mph.
   d. Dynamic Brake horsepower at wheel is 5,145.6 hp (3,840 kW).
   e. Increased weight of 188.3 metric tons (415,126.18 lbs).
   f. Maximum speed of 70 mph.
   g. Fuel consumption @ notch 8 is 191 gallons per hour.

2. EMD SD70ACe (EMD 16-710G3C-T2; 4300 THP)
   a. Starting tractive effort of 189,000 lbs (840.714 kN) up to 7.646 mph.
   b. Traction horsepower at wheel is 3,850 hp (2,873 kW).
   c. Max Dynamic Brake effort of 105,000 lbs (467.063 kN) from 18.395 mph to 3 mph; linear fade from that speed to 0 lbs @ 1 mph.
   d. Dynamic Brake horsepower at wheel is 5,145.6 hp (3,840 kW).
   e. Increased weight of 191 metric tons (421,078.6 lbs).
   f. Maximum speed of 75 mph.
   g. Fuel consumption @ notch 8 is 187 gallons per hour.

3. EMD SD70M-2 (EMD 16-710G3C-T2; 4300 THP)
   a. Starting tractive effort of 163,000 lbs (7725.06 kN) up to 8.486 mph.
   b. Traction horsepower at wheel is 3,685 hp (2,750 kW).
   c. Max Dynamic Brake effort of 86,850 lbs (386.328 kN) from 22.4 mph to 9 mph; extended range sawtooth function between those speeds; linear fade from max brake effort @ 9 mph to 0 lbs @ 3 mph.
   d. Dynamic Brake horsepower at wheel is 4,556 hp (3,400 kW).
   e. Increased weight of 177 metric tons (390,214.2 lbs).
   f. Maximum speed of 75 mph.
   g. Fuel consumption @ notch 8 is 187 gallons per hour.

IMPORTANT; Install Instructions

1. Locate the RSC assets folder (C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC)
2. Open Railworks_EMD_SD70MAC_SD70ACe_&_SD70M-2_Physics_Mod_Pack.rar
2a. Before proceeding to step 3, make sure your "RSC" folder is NOT set to "read only". You can change the folder settings using the properties function. IF the "RSC" folder is read only, the files will not overwrite existing files when you attempt step 3.
3. Drag both file folders ("SD70Pack02" and "SD70Pack03") from the .rar in step 2 into the directory you opened in step 1. Overwrite if asked.
4. The installation should be complete. Run TS2015 to check.

Thank you for downloading and installing.
Enjoy =)

Download link: http://www.mediafire.com/download/d14d6x1d3d8sxkw/TS2015_EMD_SD70MAC_SD70ACe_%26_SD70M-2_Physics_Mod_Pack.rar
« Last Edit: January 20, 2015, 10:37:05 am by Fan Railer »

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2015: Extended Range Dynamic Brakes for SD70M-2 & ES44DC
« Reply #13 on: November 15, 2014, 09:05:35 am »
[youtube]http://www.youtube.com/watch?v=3V2d_-NGD7I[/youtube]

Here is a showcase of the extended range dynamic brake feature that I've included as part of the physics mods for the EMD SD70M-2 and the GE ES44DC locomotives. The key feature here is the distinctive sawtooth profile of the extended range portion of the dynamic brake curve, something that has not been properly simulated in TS2015 (Railworks) until now. You can download these mods here:
EMD SD70M-2: http://www.mediafire.com/download/d14d6x1d3d8sxkw/TS2015_EMD_SD70MAC_SD70ACe_%26_SD70M-2_Physics_Mod_Pack.rar
GE ES44DC (Marias Pass): http://www.mediafire.com/download/26rnih7e9zit1fr/TS2015_Marias_Pass_BNSF_GE_ES44DC_Physics_Mod_Pack.rar
GE ES44DC (Stevens Pass): http://www.mediafire.com/download/z8j7ghz8xbmfmf1/TS2015_Stevens_Pass_BNSF_GE_ES44DC_Physics_Mod_Pack.rar

Here are the operational parameters that I factored in when programming the mods for these two specific locomotives:

1. EMD SD70M-2 (EMD 16-710G3C-T2; 4300 THP)
 a. Starting tractive effort of 163,000 lbs (7725.06 kN) up to 8.486 mph.
 b. Traction horsepower at wheel is 3,685 hp (2,750 kW).
 c. Max Dynamic Brake effort of 86,850 lbs (386.328 kN) from 22.4 mph to 9 mph; extended range sawtooth function between those speeds; linear fade from max brake effort @ 9 mph to 0 lbs @ 3 mph.
 d. Dynamic Brake horsepower at wheel is 4,556 hp (3,400 kW).
 e. Increased weight of 177 metric tons (390,214.2 lbs).
 f. Maximum speed of 75 mph.
 g. Fuel consumption @ notch 8 is 187 gallons per hour.
 h. Changed HUD ammeter function so that it displays tractive/braking effort in thousands of pounds. This means that if the HUD ammeter reads "157 Amps", the locomotive is putting out 157,000 lbs of tractive effort. Conversely, if the HUD ammeter reads "-34.52 Amps", the locomotive is putting out 34,520 lbs of dynamic braking effort.

2. GE ES44DC (GE GEVO-12; 4400 THP)
 a. Starting tractive effort of 142,000 lbs (800.68 kN).
 b. Continuous tractive effort of 105,680 lbs (470.08 kN) @ 12.9 mph.
 c. Traction horsepower at wheel is 3,800 hp (2835.821 kW).
 d. Max Dynamic Brake effort of 74,675 lbs (332.171 kN) @ 26.2 mph to 9 mph; extended range sawtooth function between those speeds; linear fade from max brake effort @ 9 mph to 0 lbs @ 3.5 mph.
 e. Dynamic Brake horsepower at wheel is 5,212.6 hp (3,890 kW).
 f. Increased weight of 190.509 metric tons (420,000 lbs).
 g. Maximum speed of 75 mph.
 h. Fuel consumption @ notch 8 is 210 gallons per hour.
 i. Adjusted HUD ammeter limits so that max traction amps is 1800 and max dynamic brake amps is 920. This is based off of info from BNSF ES44DC operating manual.
« Last Edit: January 20, 2015, 10:35:18 am by Fan Railer »

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2015: GE ES44C4 Mod Pack
« Reply #14 on: November 17, 2014, 04:36:04 pm »
[youtube]http://www.youtube.com/watch?v=L-ghiFqqKTw[/youtube]

This is the Kuju GE BNSF ES44AC & ES44C4 Physics Modification pack.

In order to utilize this freeware physics upgrade, you must have purchased the "US Loco & Asset Pack" available at Steam: http://store.steampowered.com/app/208306/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the physics enhancements found in this pack for personal use if you so choose.

THIS IS NOT A SOUND UPGRADE PACK. Physics adjustments made around the existing sounds.

The purpose of this pack is to adjust the locomotive weight, motor amperage limits, and traction and braking effort values for more realistic operation.

This pack includes the ability to switch between the standard ES44AC and the newly coded physics for the ES44C4. More details below.

General Parameter Change Log:
1. Changed HUD ammeter function so that it displays tractive/braking effort in thousands of pounds. This means that if the HUD ammeter reads "157 Amps", the locomotive is putting out 157,000 lbs of tractive effort. Conversely, if the HUD ammeter reads "-34.52 Amps", the locomotive is putting out 34,520 lbs of dynamic braking effort.
2. Adjusted tractive effort ratings and curves for individual locomotive variants based on the specifications listed below.
3. Adjusted dynamic brake effort ratings and curves for individual locomotive variants based on the specifications listed below.

Specific horsepower and tractive effort ratings used in calculation for individual locomotive variants:
1. GE ES44AC Standard Adhesion (GE GEVO-12; 4700 GHP)
a. Starting tractive effort of 180,000 lbs (800.68 kN) up to 8.2714 mph.
b. Traction horsepower at wheel is 4,390 hp (3,276.12 kW); efficiency rating of 93.4%.
c. Max Dynamic Brake effort of 117,000 lbs (520.442 kN) from 16.51 mph to 3 mph; linear fade from that speed to 0 lbs @ 1 mph.
d. Dynamic Brake horsepower at wheel is 5,145.6 hp (3,840 kW).
e. Increased weight of 188.7 metric tons (416,008.02 lbs).
f. Maximum speed of 75 mph.
g. Fuel consumption @ notch 8 is 210 gallons per hour.
h. Units numbered 5718-5747

2. GE ES44C4 (GE GEVO-12; 4700 GHP)
a. Starting tractive effort of 144,000 lbs (640.544 kN) up to 11.44 mph.
b. Traction horsepower at wheel is 4,390 hp (3,276.12 kW); efficiency rating of 93.4%.
c. Max Dynamic Brake effort of 78,000 lbs (346.962 kN) from 25.085 mph to 3 mph; linear fade from that speed to 0 lbs @ 1 mph.
d. Dynamic Brake horsepower at wheel is 5,212.6 hp (3,890 kW).
e. Set weight @ 126 metric tons (277,779.6 lbs). This is to simulate the total lowered axle load on the powered axles, since the core game code only differentiates powered trucks from non-powered trucks, and not powered axles from non-powered axles.
f. Maximum speed of 75 mph.
g. Fuel consumption @ notch 8 is 210 gallons per hour.
h. Units numbered 8018-8047


IMPORTANT; Install Instructions

1. Locate the following directory: (C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\Kuju\RailsimulatorUS)
2. Open Railworks_Kuju_BNSF_GE_ES44AC_&_ES44C4_Physics_Mod_Pack.rar
2a. Before proceeding to step 3, make sure your "Kuju" folder is NOT set to "read only". You can change the folder settings using the properties function. IF the "Kuju" folder is read only, the files will not overwrite existing files when you attempt step 3.
3. Drag the file folder from the .rar in step 2 into the directory you opened in step 1. Overwrite if asked.
4. The installation should be complete. Run TS2015 to check.

User's Manual:
Upon installation, the pack defaults to using the new ES44C4 Physics and numbering scheme. In order to switch physics, follow the steps below:

1. Open the following directories:
a. "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\Kuju\RailsimulatorUS\RailVehicles\Diesel\ES44AC\BNSF\Simulation"
b. "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\Kuju\RailsimulatorUS\RailVehicles\Diesel\ES44AC\BNSF\Engine"
2. In each of those directories, you will see two folders (one for each set of locomotive physics):
a. "ES44AC"
b. "ES44C4"
3. Once you choose which set of physics to use, open the respective physics folder in both directories from step 1.
4. Copy (CTRL + C) all files you find in the opened folder located in directory 1a.
5. Proceed back to directory 1a and paste (CTRL + V) the copied files into the directory; overwrite when prompted.
6. Copy (CTRL + C) all files you find in the opened folder located in directory 1b.
7. Proceed back to directory 1b and paste (CTRL + V) the copied files into the directory; overwrite when prompted.
8. If the previous 7 steps were completed properly, the physics swap should be successful; run TS2015 to check.

Thank you for downloading and installing.
Enjoy =)

Download link: http://www.mediafire.com/download/ptd18p51glybf71/TS2015_Kuju_BNSF_GE_ES44AC_%26_ES44C4_Physics_Mod_Pack.rar
« Last Edit: January 20, 2015, 10:35:01 am by Fan Railer »