BVEStation

Author Topic: Official Railworks: Train Simulator 2016 Videos, Screenshots, & Mods Thread  (Read 66249 times)

Offline mrsam127

  • Global Moderator
  • Operator
  • ****
  • Posts: 407
  • Gender: Male
  • FAA Licensed Student Pilot
    • View Profile
Re: TS2016: NJT GP40PH-2B Stuff
« Reply #30 on: December 11, 2015, 09:29:06 am »
[youtube]http://www.youtube.com/watch?v=Wg1zUNT4P3Y[/youtube]

Check out my YouTube channel by clicking the picture above!

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2016: UP EMD SD60M Mod Pack
« Reply #31 on: January 07, 2016, 09:54:44 pm »
[youtube]http://www.youtube.com/watch?v=8QPnjuI4Un0[/youtube]

This is the Union Pacific EMD SD60M Physics & Sound Modification pack version 1.0

In order to utilize this freeware physics upgrade, you must own the "Train Simulator: Union Pacific SD60M Loco Add-On Loco Add-On" pack available at Steam: http://store.steampowered.com/app/222629/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the physics enhancements found in this pack for personal use if you so choose.

The purpose of this pack is to make minor adjustments to the physics performance of the locomotive, fix the air brakes, and make minor sound adjustments.

List of changes:
1. Modified tractive effort and braking effort curves.
2. Modified power ratings @ alternator and @ wheel.
3. Set fuel capacity to 5000 gallons.
4. Set weight to 395,000 lbs.
5. Removed coupler slack.
6. Adjusted rpm range and rate of change.
7. Adjusted locomotive load response times.
8. Includes signature JohnS brake fix.
9. Includes JohnS throttle fix (throttle now snaps into preset notches).
10. Adjusted engine sound rpm range.
11. Removes alerter sound that plays when the independent brake handle is moved.

Technical specifications:
1. EMD SD60M (EMD 16-710G3A; 3800 THP)
   a. Starting tractive effort of 137,066 lbs (610 kN)
   b. Continuous tractive effort of 100,100 lbs (445 kN) @ 14.7 mph
   c. Dynamic Brake effort of 70,285 lbs (313 kN) @ 25 mph to 10 mph; fade to 0 lbs @ 3.5 mph.
   d. Wheel horsepower of 3,500 hp (2,612 kW) @ 21.5 mph
   e. Maximum speed of 70 mph
    f. Engine RPM range = 269 - 904
   g. RPM change rate (rpm/second) = 25
    h. Fuel consumption range (gph)= 3.1 - 184.7
   i. Weight = 395,000 lbs (179.171 metric tons)
   j. Fuel capacity = 5000 gallons
   k. Max traction amps = 1650
   l. Max brake amps = 820

IMPORTANT; Install Instructions

1. Locate SD60MPack01 (C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\SD60MPack01)
2. Open DTG_UP_EMD_SD60M_Physics_Mod_Pack.rar
3. Drag the file folders from the .rar in step 2 into the directory you opened in step 1.
4. The installation should be complete. Run TS2016 to check.
5. If installation is botched or does not work, to back up to original files, delete the folder from step 3.

Thank you for downloading and installing.
Enjoy =)

Download link: http://www.mediafire.com/download/icxat3f7c4hrmk2/TS2016_DTG_UP_EMD_SD60M_Physics_Mod_Pack.rar

Facebook Page: http://www.facebook.com/FanRailerMODS/

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2016: NJT EMD F40PH-2CAT Mod Release
« Reply #32 on: January 29, 2016, 08:15:14 pm »
[youtube]http://www.youtube.com/watch?v=kxpGMP-9o2E[/youtube]

This is the DTG New Jersey Transit EMD F40PH-2CAT & Comet Car Physics & Sound Mod Pack Version 0.5

In order to utilize this freeware physics & sound upgrade, you must have purchased the "Train Simulator: NJT F40PH-2CAT Loco Add-On" available here: http://store.steampowered.com/app/325968/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the physics & sound enhancements found in this pack for personal use if you so choose.

THIS *WILL* BE BOTH A PHYSICS AND SOUND UPGRADE PACK.

The purpose of this pack is to correct minor errors in the F40PH-2CAT locomotive, and will introduce more accurate sounds for the DLC in a later update.

This pack also reduces drag coefficient on the Comet cars to Amfleet levels.

General Parameter Change Log (Physics):
1. Slight tweak of TE and Dynamic Brake curves.
2. Changing the rated power.
3. Modified coupler slack performance.
4. Modified fuel capacity.
5. Modified locomotive weight
6. Lowered passenger car drag coefficient.

General Parameter Change Log (Sounds):
1. To come in V1.0 release update.

Technical specifications for F40PH-2CAT:

1. EMD F40PH-2CAT (EMD 16-645E3B; 3200 THP; separate HEP)
   a. Starting tractive effort of 65,000 lbs (289.1344 kN)
   b. Continuous tractive effort of 38,240 lbs (170.1 kN) @ 16.5 mph
   c. Dynamic Brake effort of 35,000 lbs (177.93 kN) @ 55 mph; extended range sawtooth curve between 55 mph and 36 mph. Fade to 0 lbs @ 0.5 mph
   d. Wheel horsepower of 3,000 hp (2,240 kW) @ 30 mph
   e. Maximum speed of 103 mph
    f. Engine RPM range = 410 - 900
   g. RPM change rate (rpm/second) = 25
    h. Fuel consumption range (gph)= 4 - 155
   i. Weight = 275,450 lbs (122.96875 imperial tons)
   j. Fuel capacity = 1800 gallons
   k. Max traction amps = 1785
   l. Max brake amps = 700

IMPORTANT; Install Instructions

1. Open the following directory: "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\DTG\F40PH2Pack01"
2. Open the "DTG_NJT_EMD_F40PH-2CAT_Mod_Pack.rar" file
3. Drag both folder(s) from the .rar file into the directory from step 1.
4. Mod installation is complete.
5. Run TS2016 to confirm.

Thank you for downloading and installing. Please contact me if there is a problem with the functionality of this mod pack (http://www.facebook.com/FanRailerMODS/).
Enjoy =)

Download link: http://www.mediafire.com/download/h9ap192fbdr5s8z/TS2016_DTG_NJT_EMD_F40PH-2CAT_Mod_Pack.rar

ALP-46 mod: http://www.youtube.com/watch?v=53RPL9UYd90
ALP-45DP mod: http://www.youtube.com/watch?v=oOh1a7FV2Hw
GP40PH-2B mod: http://www.youtube.com/watch?v=ALYKGQFoowk

Facebook Page: http://www.facebook.com/FanRailerMODS/

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
TS2016: Amtrak GE Dash 8-32BWH Sound Mod Preview
« Reply #33 on: February 01, 2016, 03:58:18 pm »
[youtube]http://www.youtube.com/watch?v=S0nQy9eRv9M[/youtube]

Here is the preview for the sound portion of the Dash 8-32BWH mod package. Sounds were tested on the P32AC-DM and are sourced to Callum Beatson for the no-HEP engine sounds and sound code, and to Chris Reynolds (MilwaukeeNorth418) for the new K5LA horn recording. I also take no credit for the last two image thumbnails; credits go to the respective photographers behind those photos.

I have not yet decided whether I will be porting these sounds over to the P32AC-DM as a mod update or the P42DC versions. If I do, I will announce it.

Stay tuned for the sound and physics mod release announcement. Enjoy =)

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
Re: Official Railworks: Train Simulator 2016 Videos, Screenshots, & Mods Thread
« Reply #34 on: February 11, 2016, 11:56:32 pm »
[youtube]http://www.youtube.com/watch?v=-0mviRwuFmo[/youtube]

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
Re: Official Railworks: Train Simulator 2016 Videos, Screenshots, & Mods Thread
« Reply #35 on: February 12, 2016, 01:26:20 pm »
Train 605

Timelapse:
[youtube]http://www.youtube.com/watch?v=Gdn8foF97Bo[/youtube]

Real-time:
[youtube]http://www.youtube.com/watch?v=Seqqdu9AtOg[/youtube]

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
Re: Official Railworks: Train Simulator 2016 Videos, Screenshots, & Mods Thread
« Reply #36 on: February 15, 2016, 07:48:54 pm »
Enjoy this mod development tutorial:
[youtube]http://www.youtube.com/watch?v=BNe933lRrwg[/youtube]

This is the DTG Feather River Canyon Locomotive Physics Modification pack version 1.0

In order to utilize this freeware physics upgrade, you must have purchased the "Train Simulator: Feather River Canyon Route Add-On" pack available at Steam: http://store.steampowered.com/app/376932/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the physics enhancements found in this pack for personal use if you so choose.

This is NOT a mod pack. That full mod pack MAY be available separately from this one (if I deem it necessary to create one).

The purpose of this pack is to adjust the physics performance of the two diesel locomotives that come with the DLC (EMD F7 & GE U30B).

List of general changes; specific changes for each specific locomotive located below:
1. Modified tractive effort and braking effort curves.
2. Modified power ratings @ alternator and @ wheel.
3. Modified fuel capacity.
4. Modified weights.
5. Removed coupler slack.
6. Adjusted rpm range and rate of change.
7. Adjusted locomotive load response times.

Technical specifications:
1. EMD F7 (EMD 567; 1500 THP)
   a. Starting tractive effort of 56,500 lbs (251 kN)
   b. Continuous tractive effort of 40,000 lbs (178 kN) @ 9.3 mph
   c. Dynamic Brake effort of 30,000 lbs (133 kN) @ 25 mph; fade to 0 lbs @ 0.5 mph.
   d. Wheel horsepower of 1,500 hp (1,120 kW) @ 20 mph
   e. Maximum speed of 65 mph
    f. Engine RPM range = 275 - 835
   g. RPM change rate (rpm/second) = 35
    h. Fuel consumption range (gph)= 3.5 - 93.1
   i. Weight = 237,500 lbs (106 imperial tons)
   j. Fuel capacity = 1200 gallons
   k. Max traction amps = 1500
   l. Max brake amps = 600

2. GE U30B (GE 7FDL; 3000 THP)
   a. Starting tractive effort of 72,000 lbs (320 kN)
   b. Continuous tractive effort of 64,000 lbs (289 kN) @ 10.7 mph
   c. Dynamic Brake effort of 40,000 lbs (178 kN) @ 26 mph; extended range sawtooth curve between 26 mph and 8 mph. Fade to 0 lbs @ 0.5 mph.
   d. Wheel horsepower of 2,700 hp (1,881 kW) @ 20 mph
   e. Maximum speed of 70 mph
    f. Engine RPM range = 550 - 1050
   g. RPM change rate (rpm/second) = 25
    h. Fuel consumption range (gph)= 4 - 155
   i. Weight = 287,000 lbs (128.125 imperial tons)
   j. Fuel capacity = 1700 gallons
   k. Max traction amps = 1800
   l. Max brake amps = 900


IMPORTANT; Install Instructions

1. Locate FeatherRiver (C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\DTG\FeatherRiver)
2. Open DTG_Feather_River_Canyon_Locomotive_Mod_Pack.rar
3. Drag the file folder from the .rar in step 2 into the directory you opened in step 1.
4. The installation should be complete. Run TS2016 to check.
5. If installation is botched or does not work, to back up to original files, delete the folder from step 3.

Thank you for downloading and installing.
Enjoy =)

Download here: http://www.mediafire.com/download/x1422ldc3vadiuv/TS2016_DTG_Feather_River_Canyon_Locomotive_Mod_Pack.rar

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
Re: Official Railworks: Train Simulator 2016 Videos, Screenshots, & Mods Thread
« Reply #37 on: February 16, 2016, 02:45:42 am »
[youtube]http://www.youtube.com/watch?v=Gk49c00CsuU[/youtube]

This is the DTM UP EMD GP30 Physics Modification pack version 1.0

In order to utilize this freeware physics upgrade, you must have purchased the "Train Simulator: Union Pacific GP30 Loco Add-On" pack available at Steam: http://store.steampowered.com/app/277759/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the physics enhancements found in this pack for personal use if you so choose.

The purpose of this pack is to adjust the physics performance of the locomotive.

List of changes:
1. Modified tractive effort and braking effort curves.
2. Modified power ratings @ alternator and @ wheel.
3. Set fuel capacity to 1700 gallons.
4. Set weight to ~260,000 lbs (unit specific).
5. Removed coupler slack.
6. Adjusted rpm rate of change.
7. Adjusted locomotive load response times.
8. Removed field divert feature.

Technical specifications:
1. EMD GP30A (EMD 16-567D3; 2250 THP)
   a. Starting tractive effort of 63,375 lbs (281.906 kN)
   b. Continuous tractive effort of 50,000 lbs (222.4 kN) @ 9.3 mph
   c. Dynamic Brake effort of 40,000 lbs (177.93 kN) @ 25 mph; fade to 0 lbs @ 0.5 mph.
   d. Wheel horsepower of 2,025 hp (1,511.2 kW) @ 20 mph
   e. Maximum speed of 65 mph (104.6 km/h)
    f. Engine RPM range = 275 - 835
   g. RPM change rate (rpm/second) = 35
    h. Fuel consumption range (gph)= 3.5 - 124.9
   i. Weight = 262,200 lbs (117.0536 imperial tons)
   j. Fuel capacity = 1700 gallons
   k. Max traction amps = 1500
   l. Max brake amps = 700

2. EMD GP30B (EMD 16-567D3; 2250 THP)
   a. Weight = 258,800 lbs (115.536 imperial tons)


IMPORTANT; Install Instructions

1. Locate GM GP30-UP (C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\DTM\GM GP30-UP)
2. Open DTM_UP_EMD_GP30_Physics_Mod.rar
3. Drag the file folders from the .rar in step 2 into the directory you opened in step 1.
4. The installation should be complete. Run TS2016 to check.
5. If installation is botched or does not work, to back up to original files, delete the folder from step 3.


Thank you for downloading and installing.
Enjoy =)

Download link: http://www.mediafire.com/download/zn1d30mmn3o3qqo/TS2016_DTM_UP_EMD_GP30_Physics_Mod.rar

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
Re: Official Railworks: Train Simulator 2016 Videos, Screenshots, & Mods Thread
« Reply #38 on: February 23, 2016, 10:38:58 am »
Shanghai Maglev is out: http://store.steampowered.com/app/376933/

[youtube]http://www.youtube.com/watch?v=egB4No1yR6M[/youtube]
[youtube]http://www.youtube.com/watch?v=LjHfP3xMTfE[/youtube]
[youtube]http://www.youtube.com/watch?v=BXr9rQkm6Hs[/youtube]
[youtube]http://www.youtube.com/watch?v=_Hec2CSbYlw[/youtube]
[youtube]http://www.youtube.com/watch?v=LmTNC1RvO_M[/youtube]

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
Re: Official Railworks: Train Simulator 2016 Videos, Screenshots, & Mods Thread
« Reply #39 on: February 25, 2016, 10:11:08 pm »
[youtube]http://www.youtube.com/watch?v=daZ_WZ0AogE[/youtube]

Welcome aboard the UP 844 Feather River Canyon excursion. We will be taking a consist of 24 cars up the 1% grade from Oroville to Keddie Wye and back. Settle back and enjoy the trip =)

Table of contents:
0:00 - 30:20 - Assembling the consist in Oroville Yard and proceeding to Oroville Depot to pick up passengers.
32:08 - 3:44:12 - Departing Oroville, 844 powers up the 1.0% ruling grade towards Keddie. Along the way we experience an issue with the water pump from the auxiliary tenders, necessitating a slower than normal speed and a short stop at Paxton to trouble shoot.
3:44:12 - 3:56:53 - After correcting the issue at Paxton, we continue the final few miles to Keddie.
4:00:20 - 4:13:44 - Following a brief breather stop at Keddie, we reverse the train over the wye in preparation for the return trip.
4:14:50 - 6:50:40 - The return trip downgrade to Oroville.
6:50:40 - 7:10:51 - Bringing the train back to the yard and laying up the locomotive.

Offline BVERailer

  • Operator
  • ***
  • Posts: 302
  • Gender: Male
  • Your average railfan, I guess..
    • View Profile
Re: Official Railworks: Train Simulator 2016 Videos, Screenshots, & Mods Thread
« Reply #40 on: February 27, 2016, 06:22:10 pm »
Finally made it to Hoboken without derailing using an ALP-45... ran Metro-North Express stopping at:
Spring Valley (first)
Nanuet
Pearl River
Secaucus
Hoboken Terminal (last)
(I want to do a picture but the file is too large)
I am BVERailer. I love to play openBVE and other simulation games. Please check out my YouTube channel: https://www.youtube.com/channel/UCxp-G9E0TqfwJJQUQHiuZYw

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
[youtube]http://www.youtube.com/watch?v=fM2n1UzyjSU[/youtube]

READ FIRST (EXPAND):
Section 1: 0:00 - 17:58 (Phase V w/ HEP sounds on NEC)
Section 2: 17:58 - 27:59 (File manipulation)
Section 3: 27:59 - 48:54 (Pepsi Can w/ no-HEP sounds on San Diegan)
You tell me which sounds better =)

This is the Amtrak GE Dash 8-32BWH Sound & Physics Modification pack version 1.0

In order to utilize this freeware physics upgrade, you must have purchased the "Train Simulator: Amtrak Dash 8-32BWH Loco Add-On" pack available at Steam: http://store.steampowered.com/app/376931/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the physics enhancements found in this pack for personal use if you so choose.

This is both a sound AND physics mod.

The purpose of this pack is to adjust the traction characteristics values for more realistic operation. It additionally replaces the default horn and bell sounds with files that are authentic to the locomotive.

This pack includes the option to operate with or without HEP (changes acceleration characteristics and prime mover sounds).

Credits to Callum Beatson for the no-HEP engine sounds and sound code, and to Chris Reynolds (MilwaukeeNorth418) for the new K5LA horn recording.

General Parameter Change Log:
1. Weight set to 274,890 lbs.
2. Traction characteristics adjusted; see below for more details.
3. Dynamic brake values enhanced.
4. Blend air-dynamic brake delay increased to 10 seconds (originally set at 0).
5. Replaced horn/bell sounds.
6. Includes no-HEP sound pack.
7. Removed coupler slack on Superliner cars.

Technical specifications for the Amtrak Dash 8-32BWH:
1. GE Dash 8-32BWH (GE 7FDL-12; 3300 GHP); HEP version
   a. Starting tractive effort of 60,260 lbs (268.054 kN)
   b. Continuous TE of 38,500 lbs (171.26 kN) @ 26 mph
   c. Wheel horsepower of ~2,450 hp (~1,830 kW) @ 30 mph; assuming ~200 kW HEP load
   d. Maximum traction amps = 1800 (60,260 lbs)
   e. Dynamic Brake effort of 37,390 lbs (166.319 kN) from 41 mph to 9 mph
   f. DB resistor grid rating of 4,084 hp (3,047.76 kW)
   g. Max brake amps = 900 (37,390 lbs)
   h. Maximum speed of 103 mph
   i. Engine RPM range = 400 - 1050
   j. RPM change rate (rpm/second) = 20
    k. Fuel consumption range (gph)= 4 - 158
   l. Fuel capacity = 1,800 gallons
   m. Weight = 122.71875 imperial tons (274,890 lbs)

2. GE Dash 8-32BWH (GE 7FDL-12; 3300 GHP); no HEP version
   a. Wheel horsepower of 3,000 hp (2,239 kW) @ 30 mph
   b. All other characteristics unchanged

IMPORTANT; Install Instructions

1. Locate Dash8_32BWHPack01 (C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\DTG\Dash8_32BWHPack01)
2. Open DTG_Amtrak_Dash_8-32BWH_Sound_And_Physics_Mod_Pack.rar
3. Drag the file folders from the .rar in step 2 into the directory you opened in step 1.
4. The installation should be complete. Run TS2016 to check.
5. If installation is botched or does not work, to back up to original files, delete the folders from step 3.

User's Manual:
Upon installation, the pack defaults to using the HEP physics and sounds. In order to switch physics/sounds, follow the steps below:

1. Open the following directories:
   a. "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\DTG\Dash8_32BWHPack01\RailVehicles\Simulation"
   b. "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\DTG\Dash8_32BWHPack01\Audio\RailVehicles\Diesel\Dash8_32BWH\Engine"
2. In each of those directories, you will see two folders (one for each set of locomotive physics/sounds):
   a. "HEP"
   b. "No HEP"
3. Once you choose which set of physics/sounds to use, open the respective type folder in both directories from step 1.
4. Copy (CTRL + C) all files you find in the opened folder located in directory 1a.
5. Proceed back to directory 1a and paste (CTRL + V) the copied files into the directory; overwrite (replace) when prompted.
6. Copy (CTRL + C) all files you find in the opened folder located in directory 1b.
7. Proceed back to directory 1b and paste (CTRL + V) the copied files into the directory; overwrite (replace) when prompted.
8. If the previous 7 steps were completed properly, the physics swap should be successful; run TS2016 to check.

For adventurous players/developers, there are actually two sets of no-HEP notch 8 engine sounds included. If you can figure out how to swap between those two subsets, then have fun and decide for yourself which sounds better.

Thank you for downloading and installing.
Enjoy =)

Download Link: http://www.mediafire.com/download/h8rbrwb7brpuk1j/TS2016_DTG_Amtrak_Dash_8-32BWH_Sound_And_Physics_Mod_Pack.rar

Facebook Page: http://www.facebook.com/FanRailerMODS/
« Last Edit: March 01, 2016, 05:03:06 pm by Fan Railer »

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
You could easily just link the workshop URL for the route..... #CommonSense
https://steamcommunity.com/sharedfiles/filedetails/?id=582765320

Offline BVERailer

  • Operator
  • ***
  • Posts: 302
  • Gender: Male
  • Your average railfan, I guess..
    • View Profile
Re: PVl
« Reply #43 on: March 01, 2016, 07:41:26 pm »
U talking to me?  ???
I am BVERailer. I love to play openBVE and other simulation games. Please check out my YouTube channel: https://www.youtube.com/channel/UCxp-G9E0TqfwJJQUQHiuZYw

Offline Fan Railer

  • Global Moderator
  • Dispatcher
  • ***
  • Posts: 897
  • Gender: Male
  • Train Developer
    • View Profile
    • Fan Railer's YouTube Channel
Nevermind lol.

[youtube]http://www.youtube.com/watch?v=AYkMXYKtiDw[/youtube]
[youtube]http://www.youtube.com/watch?v=Sfkx1FzpAUk[/youtube]
[youtube]http://www.youtube.com/watch?v=O-0KFWzyilY[/youtube]